Topics

A Color-Based Sensor Emulates Skin’s Sensitivity

Jamie Paik and colleagues in the Reconfigurable Robotics Lab in EPFL’s School of Engineering have developed a sensor that can perceive combinations of bending, stretching, compression, and temperature changes, all using a robust system that boils down to a simple concept: color. Read on to learn more about it.

When Mushrooms Control Robots

In creating a pair of new robots, Cornell researchers cultivated an unlikely component: fungal mycelia. By harnessing mycelia’s innate electrical signals, the researchers discovered a new way of controlling “biohybrid” robots that can potentially react to their environment better than their purely synthetic counterparts. Read on to learn more.

Reducing Electronic Waste with Biodegradable and Recyclable Luminescent Polymers

Researchers have developed a strategy to design luminescent polymers with high light-emitting efficiencies from the start that are both biodegradable and recyclable. Read on to learn more.

Closed Ecological System Network Data Collection, Analysis, Control, and Optimization System

NASA Ames Research Center presents a novel, patent-pending adjustable-autonomous intelligent systems approach for developing sustainable, small-scale reproductions of subsets of the Earths biosphere that can be distributed both on and beyond Earth, for improving the quality of life for all life, expanding the diversity of life, studying and protecting life, as well as enabling life to permanently extend beyond Earth. Read on to learn more.

Can DNA-Nanoparticle Motors Get Up To Speed With Motor Proteins?

DNA-nanoparticle motors are exactly as they sound — tiny artificial motors that use the structures of DNA and RNA to propel motion by enzymatic RNA degradation. Essentially,...

NASA Demonstrates Software ‘Brains’ Shared Across Satellite Swarms

New NASA technology works within satellite swarms. This technology, called Distributed Spacecraft Autonomy (DSA), allows individual spacecraft to make independent...

Transporting Electricity Through Air via Ultrasonic Waves

Researchers have uncovered a way of transporting electricity through air by ultrasonic waves. The level of control of electric sparks enables them to be guided around obstacles, or to hit specific spots, even into non-conductive materials.

What Changes Are Needed for Counter UAS Regulations in Civilian Airspace?

Lisa Ellman, Executive Director, Commercial Drone Alliance (CDA), is the guest on this episode of the Aerospace & Defense Technology podcast.

Accelerating Climate Modeling with Generative AI

A climate model that combines generative AI and physics data is 25 times faster than the state of the art.

Mass 3D Printing in Space for the First Time

Auxilium Biotechnologies has successfully deployed its 3D bioprinter aboard the ISS. The platform is the first of its kind, making history by printing eight implantable medical devices simultaneously in just two hours.

Design and Analysis Software Speeds Up X-59 Aircraft’s Nose Cone Optimization

Collier Aerospace’s design and analysis software enabled Swift Engineering to optimize nose cone structure of X-59 aircraft, designed for quieting sonic booms.

How a Cloud-Based Remote ID System Helps Monitor Random Drone Sightings

Taylor Sinatra, Chief Operating Officer of AeroDefense, is the guest on this episode of the Aerospace & Defense Technology podcast.

Dronetag's New Pocket-Sized Drone Detection System

Lukáš Brchl, CEO and Founder of Dronetag is the guest on this episode of the Aerospace & Defense Technology podcast.

NASA’s Moon Shot Launched Commercial Fuel Cell Industry

The first practical fuel cells were developed in preparation for NASA’s Apollo missions because batteries would have weighed too much. The group that produced these fuel cells, now called HyAxiom Inc., sells commercial fuel cells to power buildings and utilities.

Soft, Bioelectronic Sensor Implant

Researchers at the University of California, Irvine and New York’s Columbia University have embedded transistors in a soft, conformable material to create a biocompatible sensor implant that monitors...

MIT Engineers Grow “High-Rise” 3D Chips

The electronics industry is approaching a limit to the number of transistors that can be packed onto the surface of a computer chip. So, chip manufacturers are looking to build up rather than out.

Neuromorphic Semiconductor Chip Learns and Corrects Itself

Existing computer systems have separate data processing and storage devices, making them inefficient for processing complex data like AI. A Korea Advanced Institute of Science and...

7 Space Sustainability Startups

A renewed focus on space sustainability has led to the emergence of several new space startups that are thinking out of the box to find novel technology solutions to tackle space junk. Read on to take a look at seven such startups.

Nanostitches for Lighter, Tougher Composite Materials

MIT engineers have shown they can prevent cracks from spreading between composite’s layers, using an approach they developed called “nanostitching,” in which they deposit chemically grown microscopic forests of carbon nanotubes between composite layers. Read on to learn more about it.

A New Way to Stretch Diamond for Better Quantum Bits

A future quantum network may become less of a stretch thanks to researchers at the Argonne National Laboratory, the University of Chicago, and Cambridge University. By “stretching” thin films of diamond, they created quantum bits that can operate with significantly reduced equipment and expense. Read on to learn more.

Creating Materials with Stiffness, Thermal Insulation

Researchers have demonstrated the ability to engineer materials that are both stiff and capable of insulating against heat. This combination of properties is extremely unusual and holds promise for a range of applications, such as the development of new thermal insulation coatings for electronic devices. Read on to learn more.

New Glass is More Damage Resistant, Greener

Worldwide, glass manufacturing produces at least 86 million tons of carbon dioxide every year. A new type of glass aims to cut this carbon footprint in half. Read on to learn more about the invention: LionGlass, engineered at Penn State.

Levitating Objects with Light

Researchers have designed a way to levitate and propel objects using only light by creating specific nanoscale patterning on the objects' surfaces. The work could be a step toward developing a spacecraft that could reach the nearest planet outside of our solar system in 20 years, powered and accelerated only by light. Read on to learn more.

High-Speed Droplet Production in Microfluidic Devices

Researchers have introduced a microfluidic system that utilizes porous “inverse colloidal crystal” structures to dramatically improve the efficiency of microdroplet generation. Read on to learn more about it.

Cryogenic Flux Capacitor

NASA’s Cryogenic Flux Capacitor capitalizes on the energy storage capacity of liquefied gases. By exploiting a unique attribute of nano-porous materials, aerogel in this case, fluid commodities such as oxygen, hydrogen, methane, etc. can be stored in a molecular surface-adsorbed state. Read on to learn more.

Cryogenic Oxygen Storage Modules (COSM)

NASA Kennedy Space Center engineers developed a Cryogenic Oxygen Storage Module to store oxygen in solid-state form and deliver it as a gas to an end-use environmental control and/or life support system. Read on to learn more about it.