SPSCGR generates a contact graph suitable for use by the ION (Interplanetary Overlay Network) DTN (Delay/Disruption Tolerant Network) implementation from data provided by the JPL SPS (Service Preparation System) Portal. Prior to SPSCGR, there was no way for a mission or other entity to route DTN traffic across the DSN without manually...

Modern parallel file systems achieve high performance by distributing (“striping”) the contents of a single file across multiple physical disks to overcome single-disk I/O bandwidth limitations. The striping characteristics of a file determine how many disks it will be striped across and how large each...

Currently, there is a need for the computational handling of near-singularities that arise in many branches of physics, particularly for handling near-strong singularities. An example of such singularities is presented by the case of gradients...

Theodolite autocollimation metrology continues to play an important part in spacecraft optical alignment. Spacecraft optical alignment is both art and science for using optical instruments to place or determine the orientation and envelope of critical components on...

Avalanche photodiodes (APDs) are widely used to sense and amplify optical signals into electric signals based on their high quantum efficiency of photon detection and desirable internal gain. The high internal gain associated with APDs, however, may also lead to increased levels of excess noise that...

The Cryogenic Fiber Optic Sensing System (CryoFOSS) offers an approach to liquid-level sensing that uses fiber optic Bragg sensor technology. The innovation is able to sense liquid levels to within 1/4-inch spatial resolution and can actively discern between...

An ion mass spectrometer was developed (IMS) that can operate in the high radiation environment of Jupiter’s magnetosphere and its icy moons. If successful, this instrument will provide the first plasma composition measurements within Jupiter’s magnetosphere. This entails development of GEANT...

The goal of the High Energy Replicated Optics to Explore the Sun (HEROES) mission was to adapt an existing balloon payload, known as High Energy Replicated Optics (HERO), for solar observation. HERO used an on-axis star camera for fine aspect sensing, but this camera...

Laser absorption spectroscopy has emerged as one of the most important applications for semiconductor quantum cascade (QC) lasers, particularly in the mid-infrared spectral regime where many gases of interest exhibit fundamental absorption features. Laser absorption...

A microelectromechanical system (MEMS) glow discharge plasma electron and ion source (GDEIS) was designed for operation in high-pressure environments such as planetary atmospheres for mass spectroscopy. Glow discharge electron/ ion sources create electrons and ions from gas molecules in an excited...

The development of a conformal nanotube process is enabling for many applications in solar physics and space astrophysics (e.g., direct detection and imaging of exoplanets). Coronagraphs are key heliophysics instruments because they image coronal mass ejections (CMEs), which are the most energetic...

Ion optics, or grids, for ion thrusters or ion sources are traditionally made by subtractive manufacturing methods such as milling/drilling or chemically etching holes from thin sheets of bulk material. This innovation uses additive manufacturing (AM), or 3D printing, to build the grids from...

The purpose of this work was to develop and demonstrate technologies for a next-generation, efficient, swath-mapping space laser altimeter. The Lidar Surface Topography (LIST) mission concept allows simultaneous measurements of 5-meter-spatial-resolution topography and vegetation...

In testing hydrogen-fueled engines, the purity of the hydrogen fuel is important. Hydrogen may become contaminated with nitrogen (N2), argon (Ar), or oxygen (O2), thereby making the hydrogen unusable for engine testing at Stennis Space Center (SSC). Therefore, for...

This innovation is a sensor technology that can detect pressures, such as ground force reactions, down to 30 g in weight with a minimum resolution of 5 × 5 mm (resolution dictated by the limitations of the resistor grid array). This device uses a commercially available resistor grid array and custom...

Current spacesuit gloves used by astronauts on the International Space Station (ISS) have sustained cuts during extravehicular activities (EVAs) due to sharp edges and burrs, possibly on damaged ISS handrails. A warning system in the glove would aid in identifying the location of sharp objects and the...

A new method of molecular sexing is described that helps to understand population dynamics of the Florida Scrub-jay (FSJ). FSJ is an endemic, nonmigratory, monomorphic species of bird found on the Florida peninsula in lowgrowing oak or pine scrub. The current conservation status...

The DEMmaker suite of software applications produces data products containing surface shape, reflectivity, and geomorphology (craters and rocks) for a desired planetary surface based on statistically accurate size and frequency distributions of geologic and surface impact features. The current version can...

TOPS is a modeling software system that integrates data from satellite, aircraft, and ground sensors, and weather/climate models with application models to expeditiously produce operational nowcasts and forecasts of ecological conditions. TOPS allows determination of the options for different...

Images of Change provides a user-friendly mobile interface for exploring an extensive gallery of land-based and space-based images showing dramatic change over time on Earth. Hosted on NASA’s Global Climate Change website, Images of Change is designed to raise awareness of climate change, inspire curiosity and interest...

NASA relies on the Natural Environments (NE) Branch located at Marshall Space Flight Center (MSFC) to provide databases that represent the wind magnitudes and wind changes expected on day-of-launch (DOL) for vehicle programs that MSFC NE supports. MSFC NE has...

The ATRIAS robot model developed at Oregon State University uses a "spring-mass" walking approach. The natural-gait method gives human-sized bipedal robots the ability to blindly react to rough terrain, maintain balance, retain an efficiency of motion, and walk like humans.

Scientists from The Langevin Institute, Paris, France, have constructed a new fingerprint imaging system that peers inside the finger to take a picture — a more reliable and secure way of identifying individuals. The fingerprint sensor, based on full field optical coherence tomography (FF-OCT), uses an...

This week's Question: Last week, the U.S. Transportation Department and Federal Aviation Administration announced that drone hobbyists will have to register their aircraft or face unspecified penalties. The move is an attempt to prevent the unmanned aircraft from compromising air safety,...