An Electrifying Collaboration: From the Lab to the Marketplace

Matthias Preindl, associate professor of electrical engineering at Columbia Engineering, and Wesley Pennington, the founder and CEO of Tau Motors, have formed a collaboration to...

New Material Will Burn Viruses, Not Skin

A new material uses Joule heating to decontaminate its surface of coronaviruses like SARS-CoV-2 in under 5 seconds, effectively killing at least 99.9 percent of viruses.

A Li-ion Battery Material for Faster, More Efficient EV Charging

ORNL researchers recently developed a Li-ion battery material that not only recharges 80 percent of its capacity in 10 minutes but keeps that ability for 1,500 charging cycles.

How Much Do You Know About Wind Energy?

Wind energy is a big part of the mix of renewable energy sources. It brings to mind images of fields of giant windmills, but not a lot of detailed understanding. How good is your knowledge about our wind energy? Take this quiz to check it out.

Using Coffee to Reduce Waste from 3D Printing

Researchers have already experimented with using coffee grounds to 3D print jewelry, pots for plants, and even, fittingly, espresso cups. The technique is also simple enough that it will work on most low-cost, consumer-grade 3D printers.

Medtech’s New Normal

Medtech companies must adapt to a landscape that is now data-centric systems vs. equipment-centric.

New 'Lightning' System Combines Light and Electrons for Faster, Greener Computing

Computing is at an inflection point. Moore’s Law, which predicts that the number of transistors on an electronic chip will double each year, is slowing down...

Can This New Camera Enable Lower Cost High-Speed Imaging?

Recording crystal-clear images of fast movements like falling water droplets or molecular interactions requires ultra-fast cameras that are capable of capturing millions of images...

Quantum Dot Breakthrough Could Create Cheaper Infrared Sensors

Scientists from the University of Chicago have demonstrated a way to create infrared light using colloidal quantum dots. The researchers said the method demonstrates great...

New Products: September 2023 Photonics & Imaging Insider

LWIR Thermal Imaging Cores LightPath Technologies Inc. (Orlando, FL), has introduced through its subsidiary Visimid Technologies, new high framerate long wave infrared ("LWIR")...

3D-Printed Ceramics Can Increase Gas Turbine Efficiency

Professor Stephen Lynch, of Penn State’s College of Engineering, along with colleagues at Michigan State University and the University of Wyoming, have developed a process for 3D printing a high-temperature ceramic gas turbine part.

How Much Do You Know About Drones?

Since they arrived on the scene around the turn of the century, drones have enhanced the applications of many different industries. So, how much do you know about drones and their technology? Find out with this quiz.

DNA Combined with Glass Results in a Stronger, Lighter Material

Researchers say that by building a structure out of DNA and then coating it with glass, they have created a very strong material with very low density.

Tech Focus: A Production-Scale Microwave Plasma Process

6K Energy has developed the UniMelt® plasma process, a production platform to produce battery material, which reduces costs of materials by 50-70 percent, diminishes energy and water...

Product Launch: Advanced Energy Launches Liquid-Cooled Configurable Power Supply

Advanced Energy Industries, Inc., a provider of precision power conversion, measurement and control solutions announced a new high-power, liquid-cooled...

Solid-State EV Batteries Project to Low Penetration in 2030

Although the automotive industry sees solid-state batteries as the next game-changer for EV driving range, performance and safety, the technology is projected to penetrate the...

EV Battery Recycling Still Being Defined

The efficient and economical recycling of EV batteries is not just possible, but inevitable, said a panel of battery-recycling experts at the 2023 Battery Show North America in Novi, MI, this week....

Product Launch: EA Elektro-Automatik Announces Battery Test System with High Power Density

EA Elektro-Automatik, a manufacturer of DC programmable power supplies, bidirectional power supplies and regenerative electronic loads, has announced...

Getting EV Battery Gigafactories Up to Speed

The term “gigafactory” has become common lexicon for a manufacturing facility constructed to produce the almost incalculable number of individual battery cells required for the millions of...

Leaders Optimistic North America Lithium Supply Gap Can be Eliminated

At the Battery Show North America, a panel of leaders addressed North America’s lithium supply challenges, and talked about signs that aggressive movement from...

Product Focus: Interplex Showcases Latest Motor Stator Busbar for EV Motors

At the Battery Show this week, Interplex, that powers e-mobility solutions of tomorrow by designing and manufacturing interconnect and mechanical products,...

Accelerating Solar Energy Research More Sustainably

A robot developed at North Carolina State University can conduct experiments more sustainably and accelerate energy materials research.

2023 Battery Show North America Opens as Automakers, Suppliers Intensify Battery Investments

As the world’s major auto markets begin an inexorable shift to EVs and hybrid-electric vehicles (HEVs), any discussion of the engineering behind...

Product Focus: INCELLION™ Binders, Dispersants, and Rheology Modifiers

Arkema will present its full range of specialty materials enhancing the efficiency, sustainability, and reliability of electric vehicle and energy storage system...

Product Focus: A Suite of Electrical, Mechanical, and Thermal Solutions by Indium Corporation

Indium Corporation will feature its Rel-ion™ suite of electrical, mechanical, and thermal solutions to reduce EV manufacturers’ time to...

Tech Focus: Atmospheric Plasma Systems for the Pretreatment of Substrate Surfaces

Mobility-related changes mean that the need for high-performance batteries for EVs is rapidly increasing. Plasma pretreatment is the key technology for...

Sustainable Protein as a Food Source on Earth and in Space

An organism that astronauts are studying as a possible protein source for long-duration missions is also informing a project to introduce sustainable fungal proteins to low- and moderate-income communities around the world.

How Much Do You Know About Radio Frequency?

As suppliers of RF technology continue to introduce innovative new approaches to generating, transmitting, receiving, and detecting RF waves, test your knowledge about RF technology with this quiz.

Zinc-Air Batteries: A Cheaper, Safer Alternative to Li-ion Batteries

Zinc-air batteries have emerged as a better alternative to lithium in a recent study into the advancement of sustainable battery systems.