Stories
61
0
23340
30
Briefs: Electronics & Computers
A membrane-based water evaporator has been developed that is intended to serve as a heat-rejection device for a space suit. This evaporator would replace the current sublimator that is sensitive...
Briefs: Electronics & Computers
The figure presents selected views of a compact microscope imaging system (CMIS) that includes a miniature video microscope, a Cartesian robot (a computer-controlled three-dimensional...
Briefs: Electronics & Computers
Chirped- Superlattice, Blocked- Intersubband QWIP
An AlxGa1—x As/GaAs quantum-well infrared photodetector (QWIP) of the blocked-intersubband-detector (BID) type, now undergoing development, features a chirped (that is, aperiodic) superlattice. The purpose of the chirped superlattice is to increase the quantum efficiency of the device.
Briefs: Electronics & Computers
Electrical cables that dissipate spurious static electric charges, in addition to performing their main functions of conducting signals, have been developed. These cables are intended for use in trapped-ion...
Briefs: Electronics & Computers
Deep-Sea Video Cameras Without Pressure Housings
Underwater video cameras of a proposed type (and, optionally, their light sources) would not be housed in pressure vessels. Conventional underwater cameras and their light sources are housed in pods that keep the contents dry and maintain interior pressures of about 1 atmosphere (0.1 MPa). Pods...
Briefs: Materials
RFID and Memory Devices Fabricated Integrally on Substrates
Electronic identification devices containing radio-frequency identification (RFID) circuits and antennas would be fabricated integrally with the objects to be identified, according to a proposal. That is to say, the objects to be identified would serve as substrates for the deposition and...
Briefs: Software
Analyzing Dynamics of Cooperating Spacecraft
A software library has been developed to enable high-fidelity computational simulation of the dynamics of multiple spacecraft distributed over a region of outer space and acting with a common purpose. All of the modeling capabilities afforded by this software are available independently in other,...
Briefs: Software
Spacecraft Attitude Maneuver Planning Using Genetic Algorithms
A key enabling technology that leads to greater spacecraft autonomy is the capability to autonomously and optimally slew the spacecraft from and to different attitudes while operating under a number of celestial and dynamic constraints. The task of finding an attitude trajectory that...
Briefs: Software
Forensic Analysis of Compromised Computers
Directory Tree Analysis File Generator is a Practical Extraction and Reporting Language (PERL) script that simplifies and automates the collection of information for forensic analysis of compromised computer systems. During such an analysis, it is sometimes necessary to collect and analyze information...
Briefs: Software
Document Concurrence System
The Document Concurrence System is a combination of software modules for routing users expressions of concurrence with documents. This system enables determination of the current status of concurrences and eliminates the need for the prior practice of manually delivering paper documents to all persons whose approvals...
Briefs: Software
Managing an Archive of Images
The SSC Multimedia Archive is an automated electronic system to manage images, acquired both by film and digital cameras, for the Public Affairs Office (PAO) at Stennis Space Center (SSC). Previously, the image archive was based on film photography and utilized a manual system that, by today's standards, had become...
Briefs: Software
MPT Prediction of Aircraft Engine Fan Noise
A collection of computer programs has been developed that implements a procedure for predicting multiple- puretone (MPT) noise generated by fan blades of an aircraft engine (e.g., a turbofan engine). MPT noise arises when the fan is operating with supersonic relative tip Mach No. Under this flow...
Briefs: Mechanical & Fluid Systems
Pasadena, California Special-purpose robot hands (end effectors) now under development are intended to enable robots to traverse cliffs much as human climbers do. Potential applications for robots...
Briefs: Physical Sciences
Time-Transfer System for Two Orbiting Spacecraft
A report describes the time-transfer system of the Gravity Recovery and Climate Experiment (GRACE), in which information on the distribution of Earth mass is extracted from position and time measurements for two spacecraft about 200 km apart in a circular, nearly polar orbit. Each spacecraft carriers...
Briefs: Physical Sciences
A comprehensive mathematical model of mass diffusion has been developed for binary fluids at high pressures, including critical and supercritical pressures. Heretofore, diverse...
Briefs: Physical Sciences
The rates of cooling afforded by thermoelectric (Peltier) devices can be increased for short times by applying pulses of electric current greater than the currents that yield maximum...
Briefs: Physical Sciences
An improved cryostat has been developed for cooling a wide panel evenly over its surface to a temperature of -423 °F (≈-253 °C) by use of liquid helium. Originally, the cryostat was to be used in...
Briefs: Information Technology
Originally introduced by Nicholas Metropolis during the Manhattan Project, Monte Carlo methods today have very broad and extensive use in various areas of science and technology. Random number...
Briefs: Information Technology
Two variants of the finite-element method have been developed for use in computational simulations of radiative transfers of heat among diffuse gray surfaces. Both variants involve...
Briefs: Information Technology
Automation of Design Engineering Processes
A method, and a computer program that helps to implement the method, have been developed to automate and systematize the retention and retrieval of all the written records generated during the process of designing a complex engineering system. It cannot be emphasized strongly enough that “all the written...
Briefs: Medical
Regulatory agencies such as the US FDA must examine new medical devices to ensure that they are safe and effective. Sometimes, devices work successfully despite the fact that the mechanism...
Briefs: Information Technology
Increasing Accuracy in Computed Inviscid Boundary Conditions
A technique has been devised to increase the accuracy of computational simulations of flows of inviscid fluids by increasing the accuracy with which surface boundary conditions are represented. This technique is expected to be especially beneficial for computational aeroacoustics, wherein...
Briefs: Mechanical & Fluid Systems
In response to a growing industry trend toward corrosion- and maintenance-free natural-gas valves, Kerotest designed POLYBALL™™ 1/2" to 12" standard- and full-port valves...
Briefs: Manufacturing & Prototyping
A low-temperature plasma process has been devised for attaching specified molecular groups to carbon nanotubes in order to impart desired chemical and/or physical properties to the...
Briefs: Photonics/Optics
Lightweight, Flexible, Thin, Integrated Solar-Power Packs
Lightweight, flexible, thin, one-piece, solar-power packs are undergoing development. Each power pack of this type is a complete, modular, integrated power-supply system comprising three power subsystems that, in conventional practice, have been constructed as separate units and connected to...
Briefs: Photonics/Optics
Wide-aperture receivers for free-space optical communication systems would utilize Fresnel lenses instead of conventional telescope lenses, according to a proposal. Fresnel lenses weigh and...
Briefs: Materials
A proposed thermal-bonding technique would make it possible to join or separate thermoplastic parts quickly and efficiently. The technique would eliminate the need for conventional...
Briefs: Photonics/Optics
A system has been developed to replace manual measurement of small jet engine blades during safety and performance inspections. The high-speed, automated system consists of...
Briefs: Manufacturing & Prototyping
A recently invented method of fabricating periodic or otherwise ordered nanostructures involves the use of chaperonin polypeptides. The method is intended to serve as a potentially...
Top Stories
Blog: Manufacturing & Prototyping
2025 Holiday Gift Guide for Engineers: Tech, Tools, and Gadgets
Blog: Power
Using Street Lamps as EV Chargers
INSIDER: Semiconductors & ICs
Scientists Create Superconducting Semiconductor Material
Blog: Materials
This Paint Can Cool Buildings Without Energy Input
Blog: Software
Quiz: Power
Webcasts
Upcoming Webinars: AR/AI
The Real Impact of AR and AI in the Industrial Equipment Industry
Upcoming Webinars: Motion Control
Next-Generation Linear and Rotary Stages: When Ultra Precision...
Podcasts: Manufacturing & Prototyping
SAE Automotive Engineering Podcast: Additive Manufacturing
Podcasts: Defense
A New Approach to Manufacturing Machine Connectivity for the Air Force
On-Demand Webinars: Manufacturing & Prototyping
Streamlining Manufacturing with Integrated Digital Planning and Simulation

