Magazine

A method of determining the radio refractivity of the atmosphere as a function of altitude involves processing of data acquired by airborne or mountain-top Global Positioning System (GPS) receivers from particular GPS satellites as those satellites rise above or fall below the horizon....

An electrical connector was developed that is tolerant of the presence of lunar dust. Novel features of the connector include the use of a permeable membrane to act both as a dust barrier and as a wiper to limit the amount of dust that makes its way into the internal chamber of the connector. The development...

Phil-Lok Fastener Most locking fastener systems use some sort of vibrationresistant method to prevent fastener loosening. The most common method is the lock washer, in use for over 100 years. Although lock washers will inhibit rotation of the nut by increasing friction, they do not provide a positive rotation stopping...

GreenKote Greenkote coating technology is a coating method for steel and other metals that can replace a range of existing coating methods. The coating is environmentally friendly, and it is applicable to a range of base materials. In the process, parts are introduced to a rotating oven, along...

A company seeks alternative methods for sawing, drilling, boring, cutting, or otherwise separating materials such as wood, metal, and composites. When compared to conventional methods, the new technology should be faster, easier, provide a cleaner cut in terms of smoothness and dust in the...

A company seeks to improve the performance properties of polyolefins, polyethylenes, and thermoplastics. Additives, ingredients, fillers, modifiers, agents, and other methods are all of interest. Properties of interest include lighter weight, higer modulus, increased tensile...

Software has been developed to implement the ICER-3D algorithm. ICER-3D effects progressive, threedimensional (3D), wavelet-based compression of hyperspectral images. If a compressed data stream is truncated, the progressive nature of the algorithm enables reconstruction of hyperspectral data at...

A context-modeling subalgorithm has been developed as part of an algorithm that effects three-dimensional (3D) wavelet-based compression of hyperspectral image data. The context-modeling subalgorithm, hereafter denoted the context modeler, provides estimates of probability...

Research has shown that including up to 5 percent w/w carbon nanofibers in a silica backbone of polymer crosslinked aerogels improves its strength, tripling compressive modulus and increasing tensile stress-at-break fivefold with no increase in density or decrease in...

A methodology (and hardware and software to implement the methodology) has been developed as a means of investigating coupling between certain rotordynamic and hydrodynamic phenomena in turbomachines. Originally, the methodology was intended for application in an investigation of coupled...

As part of the continuing efforts to develop advanced electrolytes to improve the performance of lithiumion cells, especially at low temperatures, a number of electrolyte formulations have been developed that result in improved low-temperature performance (down to –60...

This device is a biasable, submillimeter-wave, balanced mixer fabricated using JPL’s monolithic membrane process — a simplified version of planar membrane technology. The primary target application is instrumentation used for analysis of atmospheric constituents, pressure,...

Mercury discharge lamps are critical in many trapped ion frequency standard applications. An integrity monitoring system can be implemented using end-of-life signatures observed in operational mercury discharge lamps, making it possible to forecast imminent failure and to take action to mitigate the...