Magazine

(Carpinteria, CA) offers Lightspan LSR-9562-30, a two-part, high-viscosity elastomer designed for injection molding of clear silicone parts, or as a potting and encapsulating compound because of its glob-top-like consistency. LSR-9562-30 is designed to protect electronic components and assemblies against shock, vibration,...

Buffet loads on aft aerodynamic surfaces pose a recurring problem on most twin-tailed fighter airplanes: During maneuvers at high angles of attack, vortices emanating from various surfaces on the forward parts of such an airplane engine inlets, wings, or other fuselage appendages) often burst,...

(Durham, NC) has released two new LED chips: the MegaBright 290 Gen 2 and the RazerThin 230. The MegaBright 290 Gen 2, a high-brightness chip, is 30 percent brighter and uses 8 percent less power than the chip it replaces. This new chip is targeted for digital camera, camera phone flash, and LCD backlighting applications, where brightness...

A fuel cell stack has been developed to supply power for a high-altitude aircraft with a minimum of air handling. The fuel cell is capable of utilizing oxygen from ambient air at low pressure with no need for compression. For such an application, it is advantageous to take oxygen from the air...

A modified ion-detector/ data-acquisition system has been devised to increase the dynamic range of a time-of-flight mass spectrometer (TOF-MS) that, previously, included a microchannel-plate detector and a data-acquisition system based on counting pulses and time-tagging them by use of a...

A time-of-flight mass spectrometer (TOF-MS) like the one mentioned in the immediately preceding article has been retrofitted with an ionizer based on a surface spontaneous- desorption process. This ionizer includes an electron multiplier in the form of a microchannel plate (MCP). Relative to an ionizer...

A process for fabricating a precise, diffraction- limited, ultralightweight, composite-material (matrix/fiber) paraboloidal telescope mirror has been devised. Unlike the traditional process of fabrication of heavier glass-based mirrors, this process involves a minimum of manual steps and...

A solvent-based welding process enables the joining of precise, cast polyimide membranes at their edges to form larger precise membranes. The process creates a homogeneous, optical - quality seam between abutting membranes, with no overlap and with only a very localized area of figure...

EEG apparatuses with many channels in use heretofore have been too heavy and bulky to be worn, and have been limited in dynamic range to no more than 18 bits. The present apparatus is small and light enough to be worn by the subject. It is capable of amplifying EEG signals and digitizing...

The multistage electromagnetic separator for purifying cells and magnetic particles (MAGSEP) is a laboratory apparatus for separating and/or purifying particles (especially biological cells) on the basis of their magnetic susceptibility and magnetophoretic mobility. Whereas a typical prior...

Electrolytes comprising LiPF6 dissolved at a concentration of 1.0 M in five different solvent mixtures of alkyl carbonates have been found to afford improved performance in rechargeable lithium-ion electrochemical cells at temperatures as low as -70° C. These and other electrolytes have...

Body suits harnessed to systems of elastic tethers have been proposed as means of approximating the effects of normal Earth gravitation on crewmembers of spacecraft in flight to help preserve the crewmembers’ physical fitness. The suits could also be used on Earth to increase effective...

Tool for Research Enhancement Decision Support (TREDS) is a computer program developed to assist managers in ranking options for research aboard the International Space Station (ISS). It could likely also be adapted to perform similar decision support functions in industrial and academic settings. TREDS provides a...

A document discusses a proposal to use advanced materials — especially bulk metallic glass (BMG) foams — in structural components of spacecraft, lunar habitats, and the like. BMG foams, which are already used on Earth in some consumer products, are superior to conventional metal foams: BMG foams...