Magazine

A software library has been developed for use in parallel adaptive refinement of unstructured (irregular) meshes and grids in parallel scientific and engineering computing. This library can be used in finite-difference, finite-volume, and finite-element application programs that use...

A report discusses the development of a highly complex system of distributed-computing, multidisciplinary design-optimization software, called "CJOpt," for use in research on model 4 of the High-Speed Civil Transport (HSCT) airplane (HSCT4.0). The emphasis in the report is on the...

A report presents updated information on the developments described in "MoSi2-Based Composite Materials for Aircraft Engines" (LEW-16617),NASA Tech Briefs, Vol. 22, No. 9 (September 1998), page 62. To recapitulate: Hybrid composites of (1) SiC-based fibers within (2) matrices that...

A report describes wind-tunnel experiments on a rectangular supercritical wing and presents test cases that have been selected from the archived sets of experimental data for comparison with computational fluid dynamics (CFD) predictions. In the experiments, the wing was driven in...

A unique data-acquisition system converts analog input voltages to 8-bit digital data at a rate as high as 109 samples per second (1 GHz), stores the data, and makes the data available for further processing. The system is compact, is highly resistant to ionizing radiation, consumes relatively...

A report describes experiments in which electron paramagnetic resonance imaging (EPRI) was used to determine one-dimensional spatial distributions of free radicals in two plate specimens of PMR-15 polyimide. One specimen had been postcured at a temperature of 315 °C in nitrogen, then...

The Horizons On-Line Ephemeris and Data System ("Horizons" for short) is a computer program that provides data on the locations, motions, and dynamical parameters of solar-system objects, including the Sun, nine planets, 61 natural satellites, more than 16,000 comets and asteroids, and...

A paper presents a survey of sensor- and actuator-placement problems from various applications that involve a wide range of engineering disciplines. "Smart" structures that contain sensors (e.g., microphones or strain sensors) and actuators (e.g., loudspeakers or piezoelectric actuators) can...

In a proposed method of controlling the electric current supplied for charging a nickel/hydrogen battery, the rate of evolution of heat would be taken into account along with the electrical quantities (voltage, current, and/or charge as functions of time) that are traditionally taken into...

A software system for planning and execution of actions by an autonomous spacecraft engaged in scientific exploration has been developed to satisfy requirements to (1) maintain positive resource margins and avoid short-sighted decisions in order to achieve long-term scientific and...

A report discusses some modifications of the ventricular assist device (VAD), which was described in "Small Implantable Pump Would Assist Circulation of Blood" (MSC-22424), NASA Tech Briefs, Vol. 20, No. 7 (July 1996), page 86. The VAD is a surgically implantable, miniature rotary pump designed to...

The biomorphic robot with distributed power (BIROD) is a prototype of a class of robots that will contain simple, reliable distributed actuators that will consume power from local sources - a design concept inspired in part by biological actuators like muscles in limbs. The BIROD concept stands in contrast...

A test procedure has been devised to increase the accuracy with which lightning currents on a protective wire can be determined from raw current measurements. The procedure was conceived specifically for determining lightning currents on a steel cable used to protect the space shuttle...