Magazine

The enormous strength of unidirectional carbon fiber composite rods is difficult to take advantage of at their ends because of inadequate joining technology. Bolting does not work with unidirectional composites, and bonding is difficult due to stiffness mismatches...

Recently, one-dimensional (1-D) nanostructures such as nanowires and nanotubes have become the focal point of research in nanotechnology due to their fascinating properties. These properties are intrinsically associated with low dimensionality and small diameters, which may lead to unique...

This innovation is a sub-nanosecond time-interval measurement that is compact and inexpensive, implemented in a field-programmable gate array (FPGA). Currently, high-speed count ers or semi-custom or custom ASICs (application specific integrated circuits) are used for time-interval...

The present invention addresses the effective dispersion of carbon nanotubes (CNTs) into polymer matrices. The nanocomposites are prepared using polymer matrices and exhibit a unique combination of properties, most notably, high retention of optical transparency in...

This method provides control over the growth density of carbon nanotubes (CNTs) on a relatively coarse scale, with density adjustment over several orders of magnitude, using an applied electrical field or voltage difference that is aligned substantially perpendicular to the substrate surface, which is adjacent...

NASA missions employing mobility systems and other moving mechanical assemblies for application on Mars, the Moon, and in deep space depend on the reliable operation of these assemblies and their tribological components. Wet lubricants...

Future manned spacecraft and lunar or Mars outposts will need a condensing heat exchanger (CHX) to control humidity in the cabin atmosphere. Condensing surfaces must be hydrophilic to control condensate flow and ensure efficient operation in zero gravity, and biocidal to...

The idea of turning the stickiness of a material on and off is not an intuitive concept, yet this is exactly how geckos run up walls at speeds greater than 1 m/s and cling to ceilings made of glass. Transitioning this capability to spacecraft would constitute...

Two coatings are required to remove/repel lunar dust particles from the mechanism or surface that needs protection. One coating must be a conductor, and one must be a dielectric. Tungsten carbide (WC) and aluminum oxide (Al2O3) were found to be best...

A six-degrees-of-freedom (DOF) testbed was developed for evaluating microgravity and low-gravity proximity and contact operations, e.g. in the vicinity of a near Earth orbit, for simulation of proximity operations for a human mission to an asteroid. This is accomplished using an “inverted Stewart platform” where the...

Electromagnetic motors can have problems when operating in extreme environments. In addition, if one needs to do mechanical work outside a structure, electrical feedthroughs are required to transport the electric power to drive the motor. Piezoelectric motors can be designed...

A new device detects the heartbeat and respiration of victims trapped in rubble or disaster debris, and reduces the time required to initiate a rescue. Searchers would like to distinguish live victims from those who have died recently and to distinguish humans from animals. In addition to search and rescue, there are other uses...

Since the entry of lithium-ion rechargeable batteries into the market, considerable improvements have been made in their gravimetric and volumetric energy densities, especially compared to aqueous systems such as Pb-acid, Ni-Cd, and Ni-MH. Sulfur cathodes have been...

An analysis of solar, solar wind, and geomagnetic data during the recent solar cycle minimum (2008) has recently been undertaken. It was discovered that the lowest value of the Ap index [this index is an averaged planetary A index based on data from a set of specific magnetometer stations] in...

John F. Kennedy Space Center, Florida A number of NASA centers have used polychlorinated biphenyl (PCB)-containing materials that have subsequently ended up in surrounding sediment systems. Each center is evaluating remediation technologies that may have application to their environmental problems;...

This invention specifically relates to an interchangeable sleeve that encompasses a rotating, substantially cylindrical bioreactor. The sleeve supplies a time-varying electromagnetic force of from 0.05 to 0.5 gauss to the culture chamber of the bioreactor in order to increase cell growth and proliferation...

The Weekly Status Reporting & Approval Application is a Web application that enables organizations to gather weekly or monthly (periodically) statuses electronically from all employees using a time-based process. Users input their status, which may include uploaded images, into...

Accurate assessment of circuits at cold temperatures is extremely difficult due to lack of models and tools that can simulate circuit behavior at cryogenic temperatures. A library of cryogenic temperature models was built, as well as a circuit simulator that can use those models and simulate...

Release 3 of the Telescience Resource Kit (TReK) has become available. TReK 3 is a suite of application programs that can be used to monitor and control a payload aboard the International Space Station. TReK provides both local ground support system services and an interface to utilize remote services provided by...

The ability to detect, diagnose, and respond to faults and anomalies in a timely fashion is a major concern in space missions. Fault Management (FM) primarily concerns operational mitigations of spacecraft failures. Qualtech Systems worked towards development of software tools for facilitating FM by...

Atmospheric turbulences are fractional order, and because of that, it is difficult to simulate these disturbances. Past models fall short in providing sufficiently accurate simulation of atmospheric turbulence, especially at high altitudes, for control designs of high-speed atmospheric vehicles. In...

Biologically inspired autonomous and autonomic systems (AAS) are essentially about creating self-directed and self-managing systems based on metaphors such as that of the autonomic nervous system. Agent technologies have been identified as a key enabler for engineering autonomy and autonomicity in systems, both in terms of...