Test & Measurement

One significant area of research in fuel cell technology includes systems in which a fuel cell is combined with another power generation device (a turbine, for example) to create a hybrid system that combines the advantages of the two standalone systems, resulting in a high fuel-to-electricity...

A real-time ion mobility sensor developed to detect contaminants and explosives is reliable, sensitive, robust, and inexpensive. The technology improves sensitivity and reduces false alarms for threat agents, and can identify chemicals with a sensitivity of five parts per billion.

High-precision ranging (optimetric) instruments are highly desired for both space navigation and communications as well as gravitational-based science missions. Traditionally, these measurements are made with instruments solely dedicated to ranging (i.e. Doppler shift of a...

Microvolt-level signals require gains of at least a thousand. Offsets and noise in the amplifier chain will be amplified by the same amount, which can saturate the amplifier or swamp the signal so it is not resolvable. Other methods use chopping and/or autozero techniques to lower the offset and noise. The key...

NASA Goddard Space Flight Center has developed a pointing measurement detection and control system that monitors the real-time optical axis motions (such as tip and tilt) that affect image quality in aerial platforms. To date, there is no known real-time optical image alignment and control...

A noise source is an enabling technology for passive millimeter-wave remote sensing applications such as atmospheric sounding, and precipitation and ice cloud measurements. NASA Goddard Space Flight Center has developed a packaged noise source that will allow calibration of the front end at the...

Electrical power lines pose a serious crash hazard to helicopters and other air-based vehicles, especially small aerial vehicles such as unmanned aircraft systems (UAS). This is because power lines are so widespread, hard to see, and strung at roughly the same height above the ground at...

The detection and localization of gas releases, such as methane from leaking natural gas pipelines or nitrogen oxides from failing electrical equipment, require high sensitivity to the target gas and insensitivity to non-target gases. Infrared (IR) absorption spectroscopy gives highly specific...

A compact and portable system is used to monitor and store real-time measurements of stray energy through a pyrotechnic firing circuit using infrared technology. The infrared sensor is mated to the NASA Standard Initiator simulator, and is calibrated such that the current input through the...

Mars is the ultimate destination for NASA's human exploration program. In Situ Resource Utilization (ISRU) is a key technology required to enable such missions. The goals of using resources available at the exploration site are to reduce launch and delivered mass, reduce risk and cost, enable...