Stories
44
0
2400
30
Briefs: Materials
A number of matrix resins that contain thermosetting plasticizers have been developed for use in the resin-transfer molding (RTM) of composite-material (fiber/matrix) parts. These...
Briefs: Automotive
A government/ industry/ academic cooperative has developed a hybrid electric transit bus (HETB). The goals of the development program, which continues, include doubling the fuel economy...
Briefs: Energy
A simple microwave power-transmission system has been proposed for maintaining the charge on spacecraft batteries immediately prior to launch. The basic concept of this system could also be applied to other systems...
Briefs: Materials
Composite Graphite Anodes Containing Cyclic Ether Additives
Scientists have developed a type of composite graphite anode that will benefit the U.S. space program and private industry by increasing the rechargeability of lithium-ion batteries. Rechargeable lithium-ion batteries, which are used on the space shuttle and Space Station, are also used in...
Briefs: Energy
Improved Control of Charging Current for Ni/H Battery
In a proposed method of controlling the electric current supplied for charging a nickel/hydrogen battery, the rate of evolution of heat would be taken into account along with the electrical quantities (voltage, current, and/or charge as functions of time) that are traditionally taken into...
Briefs: Materials
Separating Ethanol From Water Via Differential Miscibility
The differential miscibility of castor oil in ethanol and water would be exploited to separate ethanol from water, according to a proposal. Burning the separated ethanol would produce more energy than would be consumed in the separation process. In contrast, the separation of a small amount...
Briefs: Electronics & Computers
Studies of physical and chemical effects in the hydride-forming electrodes of rechargeable nickel/metal hydride electrochemical cells have yielded results that now guide...
Briefs: Robotics, Automation & Control
Early experiments in a continuing research program have demonstrated that thermal batteries made from powdered solid electrode and electrolyte materials can be improved by use of smaller...
Briefs: Energy
According to a proposal for small electric-power systems that must operate in cold environments, heat released in the operation of solar photovoltaic arrays with solar concentrators would be...
Briefs: Energy
A surface-micromachining process has been devised for use in fabricating microscopic polycrystalline diamond structures (e.g., bridges and cantilevers) as integral parts...
Briefs: Physical Sciences
The recent summit meeting held in Kyoto, Japan, has brought world-wide attention to the issue of global climate change. For the past 5 years, the Department of Energy's Atmospheric Radiation...
Briefs: Energy
Experiments have shown that improved hydride-forming negative electrodes for rechargeable nickel/metal hydride (Ni/MH) electrochemical cells can be made by substituting Ge for some...
Briefs: Energy
Experiments have shown that improved hydride-forming negative electrodes for rechargeable nickel/metal hydride (Ni/MH) electrochemical cells can be made by substituting Sn for some...
Briefs: Unmanned Systems
Solar-Powered Aerobots With Power-Surge Capabilities
Advanced aerobots that would be powered by solar photovoltaic batteries and that would be capable of storing energy for occasional operation during short intervals at power levels far beyond those of the photovoltaic batteries have been proposed. Aerobots are robotic balloon-buoyed airborne...
Briefs: Electronics & Computers
Curves of limiting voltage (V) as a function of temperature (T) for nickel/cadmium cells and batteries can be computed by use of a mathematical cell model based on first principles....
Briefs: Energy
Rechargeable, thin-film, lithium-based microbatteries of the proposed type would be manufactured in the discharged condition, and lithium anodes would be formed in situ during...
Briefs: Materials
The alumina for making a suspension according to this concept must be in the form of a highly pure (preferably >99.99 percent) powder with a suitable particle-size distribution —...
Briefs: Photonics/Optics
Modulated (as opposed to steady) light can be used in the optical transmission of power to remotely located sensor circuitry in a system like that described in the preceding article,...
Top Stories
Blog: Robotics, Automation & Control
Aerial Microrobots That Can Match a Bumblebee's Speed
Blog: Electronics & Computers
Turning Edible Fungi into Organic Memristors
Blog: Manufacturing & Prototyping
Revolutionizing the Production of Semiconductor Chips
News: Energy
INSIDER: Electronics & Computers
World’s Smallest Programmable, Autonomous Robots
INSIDER: Manufacturing & Prototyping
Webcasts
On-Demand Webinars: Power
E/E Architecture Redefined: Building Smarter, Safer, and Scalable Vehicles
Upcoming Webinars: Energy
Hydrogen Engines Are Heating Up for Heavy Duty
Upcoming Webinars: Electronics & Computers
Advantages of Smart Power Distribution Unit Design for Automotive...
Upcoming Webinars: Automotive
Quiet, Please: NVH Improvement Opportunities in the Early Design...
Upcoming Webinars: Power
A FREE Two-Day Event Dedicated to Connected Mobility
Podcasts: Defense
How Sift's Unified Observability Platform Accelerates Drone Innovation
