Materials & Coatings

Pressure vessels overwrapped with graphite-fiber-based composite materials that become damaged would be salvaged by a proposed repair technique. The need for the technique arises as follows: High-performance graphite-fiber-based composites are very susceptible to damage from impact or cutting....

A report describes an experimental study of the surface-chemical, microstructural, and tribological properties of cubic boron nitride (c-BN) films, which are potentially useful as hard, wear-resistant coatings on bearings and on steel-cutting tools. For the experiments, BN films about 500 nm thick were...

Damage-tolerant polymeric composite overwraps have been proposed for lightweight pressure vessels that are made of composites of graphite fibers in polymeric matrices. Graphite-fiber/polymer composites are vulnerable to impact damage; overwraps on the pressure vessels...

A process for making superior diffusion platinum-aluminide bond coats for plasma-sprayed or physical-vapor-deposited thermal-barrier coats (TBCs) on superalloy substrates has been devised. The novel aspect of the process lies in the use of several relatively inexpensive pack diffusion steps to...

Experiments have confirmed the feasibility of a new class of lightweight, reliable, simple, and low-cost expandable structures. The concept called "cold hibernated elastic memory" (CHEM) utilizes the shape memory polymers (SMPs) in open cellular structures. Basically, these structures are...

A process for precleaning brass and copper parts before processing them further in a clean room includes a brightening chemical treatment in solution of 85 volume percent phosphoric acid, 3 volume percent nitric acid, and 12 volume percent acetic acid. This solution acts rapidly and can be discarded...

An etching solution has been developed for use in removal of silver plating from polymer-based (including composite-material) structural components, the surfaces of which are intended to serve as mirrors and waveguide structures. Such structures are often plated with aluminum, copper, and...

A report presents findings from recent research on the use of monatomic oxygen to form microscopic textures on the surfaces of polymers and extends the concept to some forms of carbon. Earlier developments in this field were described in two articles in NASA Tech Briefs, Vol. 20, No. 11 (November...