Mechanical & Fluid Systems

Advanced composite materials processable by cost-effective manufacturing play an important role in developing lightweight structures for future space and planetary exploration missions. With the growing demand for improved performance in the...

Afixed geometry device has been developed to promote boundary layer transition and generation of streamwise vorticity, and is capable of withstanding entry heating environments for the Space Shuttle Orbiter. Designed to have a total height above the surface...

Satellite launches experience approximately one deployment failure every two years. These failures include a solar array or antenna that fails to deploy because it is stuck due to a mechanism failure, or is snagged by a cable or thermal blanket. Knowledge of the exact circumstances of the deployable failure...

Mass spectrometers on atmospheric entry probes require a method for introducing gas from high-pressure ambient regions to the vacuum of the mass spectrometer interior.

Engineers at the Massachusetts Institute of Technology (MIT) have developed a way to prevent hydrogels from dehydrating. The water-based technique could lead to longer-lasting contact lenses, stretchy microfluidic devices, flexible bioelectronics, and even artificial skin.

Ice has been discovered on Mars and is present in the permanently shadowed craters on the Moon and on many asteroids. The ice is usually buried beneath an overburden of regolith. Evidence indicates this overburden may be a meter deep in some locations for the Moon; for Mars, it varies with latitude...

The goal of this work was to advance the development of new, extremely small (≈2 cm3), low-power (≈3 W), and low-cost micro mass spectrometer instrument systems (μMSIS) through the application of microelectro-mechanical system (MEMS) design and fabrication, and microsystem...

This software predicts flow through the initiator of a Primer Chamber Assembly Valve. These valves exhibited a potential failure mode for specific operating conditions where dual simultaneous firings of the initiator occurred. The software tool was able to identify a fluid dynamic...

AMars “sample caching rover” mission designed to collect, document, and package samples for future collection and return to Earth was recommended as the highest-priority mission for 2013–2022 by the 2011 Planetary Decadal Survey. A key premise of...

Typical aerospace rocket engines use valves to control the flow and pressures of propellant and pressurants. These typical valves are designed to operate with a mechanical, electromechanical, or pneumatic operator. They all have at least one, and often multiple, penetrations from...

In a structural cold plate, typically there is a structural member such as a honeycomb panel or a brazed sandwich assembly that provides the structural strength, and at least one cold plate that cools equipment attached to the structural member. The cold plate...