Stories
39
61
0
900
30
Articles: Manufacturing & Prototyping
The ability of collaborative robots to share tasks with humans and flexibly adapt to new requirements can provide high returns on investment in a wide variety of industrial applications. Manufacturers...
Blog: Manufacturing & Prototyping
Some parts should be CNC machined, and some parts should be 3D printed. Our expert compares the two manufacturing processes.
Briefs: Mechanical & Fluid Systems
Optical range measurements, already used in manufacturing and other fields, may help overcome practical challenges posed by structural fires, which are too hot to measure with conventional...
Briefs: Materials
Self-Healing, Fluid-Inspired Material
Even tiny cracks can cause bridges to collapse, pipelines to rupture, and fuselages to detach from airplanes due to hard-to-detect corrosion in tiny cracks, scratches, and dents. A new coating strategy for metal self-heals within seconds when scratched, scraped, or cracked. The novel material could prevent tiny...
Briefs: Imaging
The mechanical properties of sheet metal materials are directional. Their deformation behavior and their strength differ significantly depending on the viewing direction; for example, in the direction of rolling, or...
Briefs: Mechanical & Fluid Systems
Along with intensity and color, polarization is a property of light that can provide useful information for scene analysis; however, the human eye and most cameras cannot detect...
Products: Photonics/Optics
Wave Springs
Smalley, Lake Zurich, IL, announced a Nested Spirawave Wave Springs series. The multiple-turn, flat wire wave springs are coiled in parallel to produce two to three times as much force as traditional...
Briefs: Aerospace
Pre-Treatment Solution for Water Recovery
The Pre-Treatment Solution for Water Recovery technology was developed by NASA Johnson Space Center innovators to increase the amount of potable water recovered from the International Space Station’s urine processor assembly system. The solution increased the water recovery rate in the ISS distiller from...
Briefs: Defense
System Enables Direct Data Transmission Between Underwater and Airborne Devices
Today, underwater sensors cannot share data with those on land, as both use different wireless signals that only work in their respective mediums. Radio signals that travel through air die very rapidly in water. Acoustic signals, or sonar, sent by underwater devices...
Articles: Imaging
This column presents technologies that have applications in commercial areas, possibly creating the products of tomorrow. To learn more about each technology, see the contact information provided for that innovation.
Briefs: Aerospace
NASA’s Langley Research Center has developed a method in which a metal matrix composite (MMC) material is incorporated into a metallic structure during a one-step...
5 Ws: Energy
Who
Millions of people who rely on pacemakers, defibrillators, and other livesaving implantable devices powered by batteries that need to be replaced every five to 10 years.
Briefs: Mechanical & Fluid Systems
Many applications in science and industry require an apparatus that creates a controlled amount of a fluid introduced into another fluid. For instance, some material corrosion testing applications require...
Application Briefs: Manufacturing & Prototyping
RenishawWest Dundee, ILwww.renishaw.com
HiETA develops metal additive manufacturing (AM) methods for the production of complex, lightweight structures for heat management applications. Parts...
Briefs: Propulsion
Recent technical advances have enabled flywheel energy storage systems (FESS) to become more compact and able to support higher-power applications. Due to their proven reliability,...
Briefs: Software
A metal-organic framework (MOF) material was developed that exhibits a selective, fully reversible, and repeatable capability to remove nitrogen dioxide gas from the atmosphere in ambient...
Briefs: Materials
Industrial machinery, agricultural equipment, transportation vessels, and home applications depend on lubricants; however, they leave a heavy environmental footprint. Common lubricants, oils,...
Products: Mechanical & Fluid Systems
Bearing Sensor
ABB (Zurich, Switzerland) introduced the ABB Ability™ smart sensor that enables health checks for bearings. The smart sensor technology provides an early indicator of potential problems by assessing the condition...
Application Briefs: Manufacturing & Prototyping
In the middle of the Pacific Ocean, Hawaii Island is surrounded by thousands of miles of thermally stable seas. The 13,796-foot Maunakea mountain summit has no nearby ranges to roil the upper...
Articles: Motion Control
When choosing a gas spring for a particular application, it’s imperative to have a basic understanding of the workings and terminology used when specifying gas springs. This article offers...
Briefs: Materials
By mixing carbon fibers into polymer-based brakes, researchers designed brakes that are self-lubricating. These new and improved brakes can prevent wear-and-tear and have better frictional...
Briefs: Mechanical & Fluid Systems
Researchers, drawing inspiration from bacteria, have designed smart, bio-compatible microrobots that are highly flexible. Because these devices are able to swim through fluids and modify their shape when...
Briefs: Mechanical & Fluid Systems
Fast-response, stiffness-tunable (FRST) soft actuators — or movable machine elements — were developed that could be used in soft robots.
Articles: Mechanical & Fluid Systems
Linear permanent magnet brakes, also known as eddy current brakes, are a failsafe, power-free deceleration system that is used in conjunction with a metal reaction plate. Ceramic or rare earth magnets are bonded...
Articles: Transportation
Smarter, better, faster, less expensive — those words are the mantra of today’s global economy. As organizations seek to streamline operations and do more with less, they...
Briefs: Propulsion
Mechanical systems such as engines and motors rely on two principal types of motions of stiff components: linear motion, which involves an object moving from one point to another in a straight line,...
INSIDER: Mechanical & Fluid Systems
Vehicles could be affordably produced for a wide variety of specialized purposes using a self-contained wheel unit that combines a wheel and an electric motor with braking, suspension, steering,...
Products: Software
Boothroyd Dewhurst, Wakefield, RI, announced Design for Manufacture and Assembly (DFMA®) 2019 software for analyzing parts and assemblies. DFMA utilizes a question-and-answer interface that identifies opportunities for...
Briefs: Sensors/Data Acquisition
Computer-Controlled Exercise Equipment
While a wide variety of computer-controlled exercise machines for training and rehabilitation exist — some of which can be automatically adjusted to vary resistance or incline — such systems provide for preprogrammed changes in load or resistance. What is needed is a system that overcomes the limitations...
Top Stories
Blog: Lighting
A Stretchable OLED that Can Maintain Most of Its Luminescence
INSIDER: Design
Advancing All-Solid-State Batteries
Blog: Energy
Batteries that Can Withstand the Cold
Blog: AR/AI
My Opinion: We Need More Power Soon — Is Nuclear the Answer?
News: Power
Blog: Aerospace
Webcasts
On-Demand Webinars: Transportation
Quiet, Please: NVH Improvement Opportunities in the Early Design Cycle
Upcoming Webinars: Test & Measurement
From Spreadsheets to Insights: Fast Data Analysis Without Complex...
Upcoming Webinars: Aerospace
Cooling a New Generation of Aerospace and Defense Embedded...
Upcoming Webinars: AR/AI
Beyond AI-Copy-Paste Engineering: Advanced AI-Integration Success...
Upcoming Webinars: Energy
Battery Abuse Testing: Pushing to Failure

