Fully Stretchable Fabric-Based Lithium-Ion Battery

The future of wearable technology just got a big boost thanks to a team of University of Houston researchers who designed, developed, and delivered a successful prototype of a fully stretchable fabric-based lithium-ion (Li-ion) battery.

A Solvent-Free Process to Make Better, Cheaper Li-ion Battery Electrodes

A team Led by Worcester Polytechnic Institute (WPI) researcher Yan Wang has developed a solvent-free process to manufacture Li-ion battery electrodes that are greener, cheaper, and charge faster than electrodes currently on the market.

Advancing High-Energy-Density Devices

In critical applications such as electric vehicles, there is a growing demand for a device that can efficiently produce both high power and high energy over a significant number of cycles.

An Energy-Storing Concrete-Based Supercapacitor

Two of humanity’s most ubiquitous historical materials, cement, and carbon black may form the basis for a novel, low-cost energy storage system, according to a new study by MIT researchers.

New Products

See the new products, including a battery tester, battery test solution, a battery monitoring system, battery chargers, and more.

Advanced Electrical Architectures Demand New Developmental Strategies

As the need for sophisticated functionality increases, high-performance computers and zone controllers could be the heart of next-generation vehicle electrical platforms.

Pratt & Whitney, Virginia Tech Pioneer Laser-Optical Approach for Turbofan Engine Thrust Measurement

A longstanding partnership between Virginia Polytechnic Institute and State University (Virginia Tech) and Pratt & Whitney has resulted in a new laser-optical technology that aims to revolutionize in-flight thrust measurement.

Clean Technology Lasers: The New Tool in Surface Pre-Treatment for Superior Coating Adhesion

Given its effectiveness pretreating metal surfaces, industrial laser systems are increasingly being used in manufacturing facilities. The systems can be integrated into automated inline processing lines, or technicians can use mobile handheld units.

Quality Check for OLED and μ-LED Displays Amid the Race for Ever Higher Resolution

The race for very high resolutions places increased demands not only on display manufacturers, but also on the suppliers of light measurement technology.

Novel Light-Field Sensor for 3D Scene Construction Has Unprecedented Angular Resolution

A research team has developed a 3D imaging sensor that has an extremely high angular resolution — it can distinguish points of an object separated by an angular distance, of as little as 0.0018°. The sensor operates on a unique angle-to-color conversion principle.

Photonic Integrated Circuit Testing: Accelerating R&D From Lab to Fab

While the promise of smaller, better, faster, lighter devices enabled by integrated photonics technologies is indeed the ultimate goal for AIM Photonics, the actual path to high-volume manufacturing isn’t necessarily a smooth ride for PIC designers, developers, and engineers.

NeuWS Camera Overcomes Light Scattering With Full-Motion Video

Engineers have created full-motion video technology that could potentially be used to make cameras that peer through fog, smoke, driving rain, murky water, skin, bone, and other media that reflect scattered light and obscure objects from view.

Transferring Data with Many Colors of Light Simultaneously

Researchers have demonstrated an energy-efficient method for transferring larger quantities of data over the fiber-optic cables that connect the nodes. This new technology improves on previous attempts to transmit multiple signals simultaneously over the same fiber-optic cables.

A First-Of-Its-Kind Integrated Optical Isolator

A team of researchers led by electrical engineer Marko Lončar at SEAS has developed a method for building a highly efficient integrated isolator that’s seamlessly incorporated into an optical chip made of lithium niobate.

Detecting Threats Beyond the Limits of Human, Sensor Sight

A new patented software system can find the curves of motion in streaming video and images from satellites, drones, and far-range security cameras and turn them into signals to find and track moving objects as small as one pixel.

New Products

See the new products, including a handheld NIR spectrometer, a Boson+ thermal camera module, next-generation pump laser diode, and much more.

Infrared Technology for Chamber Clean Endpoint Detection

Efficient and complete chamber cleaning processes are critical for the success of CVD/ALD processes.

Videos of the Month

See the videos of the month, including one on Amphenol Sine’s A Series™ family of sealed heavy-duty, multipin plastic and metal connectors; one on RoboSAR – an autonomous search and rescue of victims; and more.

Leveraging Virtual Twins for Manufacturing Excellence

CenterLine’s successful adoption of the virtual twin showcases the technology’s tremendous potential for the automation industry. As virtual twin technology continues to evolve, it will disrupt industries even further.

An Effective Roadmap to Mobile Automation

To achieve the numerous benefits of mobile automation, manufacturers must take some key implementation considerations into account and follow essential guidelines. Doing so ensures that they apply the right mobile automation solution.

Quantum Computing Architecture May Enable High-Fidelity Communication

MIT researchers have developed a quantum computing architecture that aims to enable extensible, high-fidelity communication between superconducting quantum processors.

Future-Proofing Applications with Industrial Ethernet

While there may still be times when proprietary or serial communications are useful, the wide availability and low cost of high-performance industrial-specific devices and installation media are making industrial Ethernet the best approach for future-proofing applications and operating most efficiently.

New Wireless System for Greater 5G Access

A new paper on wireless connectivity from researchers at the lab of Dinesh Bharadia, an affiliate of the UC San Diego Qualcomm Institute (QI), introduces a new technique for increasing access to the 5G-and-beyond millimeter wave (mmWave) network.

Lightweight, Self-Deployable Helical Antenna

NASA's newly developed antenna is lightweight (at or below 2 grams), low volume (at or below 1.2 cm3), and low stowage thickness (approx. 0.7 mm), all while delivering high performance (at or above 10 dBi gain).

SkinKit Offers Versatile, Wearable On-Skin Computing

The next generation of wearable computing technology will be even closer to the wearer than a watch or glasses: It will be affixed to the skin.

Wearable RFID Sensor Tags Yield Extended Operational Times

The technology exploits the inherently passive nature of RFID to approximate the services provided by traditional active Internet of Things (IoT) protocols like ZigBee and Bluetooth.

RFID Slot Antenna Offers Big Performance, Small Form Factor

Innovators at NASA Johnson Space Center have developed a quarter-wavelength RFID slot antenna that provides polarization diversity and employs dual resonances, but in a form factor that is much smaller than other RFID antennas that provide similar functionality.

Thin Flexible Sensor Characterizes High-Speed Airflows on Curved Surfaces

To improve efficiency, it is necessary to characterize and reduce flow separation on curved surfaces.

Sensors Quickly Spot Coronavirus Proteins and Antibodies

Scientists have created a new way to detect the proteins that make up the pandemic coronavirus as well as antibodies against it. They designed protein-based biosensors that glow when mixed with components of the virus or specific COVID-19 antibodies.

Novel Solid Electrolyte Materials for Improved Battery Performance

A team has designed a new blueprint for solid-state batteries that are less dependent on specific chemical elements, particularly critical metals that are challenging to source due to supply chain issues. Their work could advance solid-state batteries that are efficient and affordable.

Self-Sensing Electric Artificial Muscles

Taking inspiration from nature, a team of researchers at Queen Mary’s School of Engineering and Materials Science has successfully created an artificial muscle that seamlessly transitions between soft and hard states while also possessing the remarkable ability to sense forces and deformations.

An Innovative Method to Produce Soft, Recyclable Fibers for Smart Textiles

Drawing inspiration from how spiders spin silk to make webs, a team of researchers has developed an innovative method of producing soft fibers that possess three key properties (strong, stretchable, and electrically conductive), and at the same time can be easily reused to produce new fibers.

Synthesizing Complex Optical Materials

Researchers have developed a colloidal synthesis method for alkaline earth chalcogenides. This method allows them to control the size of the nanocrystals in the material.

Developing More Durable Solar Cells

An international research collaboration led by UCLA has developed a way to use perovskite in solar cells while protecting it from the conditions that cause it to deteriorate.

A Novel Way to Convert Heat to Electricity

Researchers have fabricated a novel device that could dramatically boost the conversion of heat into electricity. If perfected, the technology could help recoup some of the recoverable heat energy that is wasted in the U.S. at a rate of about $100 billion each year.

EV Battery Breakthrough: 10-Minute Charge

Researchers at Penn State University have achieved a breakthrough in electric vehicle (EV) battery design to enable a 10-minute charge time for a typical EV battery.

New Microchip Could Monitor Earth’s Climate, Human Health

A team at Delft University of Technology has built a new technology on a microchip by combining two Nobel Prize-winning techniques for the first time. This microchip could measure distances in materials at high precision — e.g., underwater or for medical imaging.

3D Printing Stronger Carbon Nanotubes

Researchers in the Lyding Group at the University of Illinois Urbana-Champaign have discovered an efficient, sustainable method for 3D-printing single-walled carbon nanotube films, a versatile, durable material that can transform how we explore space, engineer aircraft, and wear electronic technology.

A Sintering Method to Fabricate Large Perovskite Devices

A Penn State-led team of researchers have created a new process to fabricate large perovskite devices that is more cost- and time-effective than previously possible — and may accelerate future materials discovery.

Detecting Porosity Defects in 3D-Printed Metal Parts

A research team has made new discoveries that can expand additive manufacturing in industries that rely on strong metal parts, including aerospace.

Assembling Matter in 3D Using Sound Waves for 3D Printing

Researchers have created a new technology to assemble matter in 3D. Their concept uses multiple acoustic holograms to generate pressure fields with which solid particles, gel beads, and even biological cells can be printed.

New on the Market

See what's new on the market, including an EV valve motor drive, a switch mainframe, CAD/CAM software, control panels, and more.

Products of Tomorrow

See the products of tomorrow, including microscale robots, LOTUS coating, and a wearable e-tattoo.

Product of The Month

See the product of the month, IDEC Corporation's SA2E general-purpose photoelectric sensor family.

Emerging Plasma FIB-SEM Techniques Advancing Battery Innovation

PFIB-SEM is a valuable technique that neatly complements other analytical and imaging methods, providing high-resolution 2D and 3D information for larger areas, as compared to traditional gallium FIB-SEM.

The Road to Net-Zero EV Development Labs

As the automotive sector continues to transition to a significant portion of their portfolio being electric, they must either build the needed test facilities to support this transition or update their current facilities.

GM Readies Fuel Cells for Commercial Deployment

After decades of concentrated development work, GM’s fuel-cell R&D unit Hydrotec is poised to deploy “the first applications that will be going commercial” of its hydrogen fuel-cell technology.

Developing High-Energy-Density Batteries Using Aluminum Foil

A team of researchers is using aluminum foil to create batteries with higher energy density and greater stability. The team’s new battery system could enable EVs to run longer on a single charge and would be cheaper to manufacture – all while having a positive impact on the environment.

New Priming Method for Improving Battery Lifecycle

Scientists at Rice University’s George R. Brown School of Engineering have developed a readily scalable method to optimize prelithiation, a process that helps mitigate lithium loss and improves battery life cycles by coating silicon anodes with stabilized lithium metal particles.

5Ws of the ‘Enchilada’ Trap

A new ion trap developed by Sandia National Labs enables scientists to build more powerful machines to advance the experimental but potentially revolutionary field of quantum computing.

Revolutionizing Flight Simulation with 3D Printing

Addressing the challenge of designing and developing a first-of-its-kind handheld controller for flight simulations.

Zinc-Air Batteries: A Cheaper, Safer Alternative to Li-ion Batteries

Zinc-air batteries have emerged as a better alternative to lithium in a recent study into the advancement of sustainable battery systems.

How Much Do You Know About Radio Frequency?

As suppliers of RF technology continue to introduce innovative new approaches to generating, transmitting, receiving, and detecting RF waves, test your knowledge about RF technology with this quiz.

Sustainable Protein as a Food Source on Earth and in Space

An organism that astronauts are studying as a possible protein source for long-duration missions is also informing a project to introduce sustainable fungal proteins to low- and moderate-income communities around the world.

Tech Focus: Atmospheric Plasma Systems for the Pretreatment of Substrate Surfaces

Mobility-related changes mean that the need for high-performance batteries for EVs is rapidly increasing. Plasma pretreatment is the key technology for...

Product Focus: A Suite of Electrical, Mechanical, and Thermal Solutions by Indium Corporation

Indium Corporation will feature its Rel-ion™ suite of electrical, mechanical, and thermal solutions to reduce EV manufacturers’ time to...

Product Focus: INCELLION™ Binders, Dispersants, and Rheology Modifiers

Arkema will present its full range of specialty materials enhancing the efficiency, sustainability, and reliability of electric vehicle and energy storage system...

2023 Battery Show North America Opens as Automakers, Suppliers Intensify Battery Investments

As the world’s major auto markets begin an inexorable shift to EVs and hybrid-electric vehicles (HEVs), any discussion of the engineering behind...

Accelerating Solar Energy Research More Sustainably

A robot developed at North Carolina State University can conduct experiments more sustainably and accelerate energy materials research.

Leaders Optimistic North America Lithium Supply Gap Can be Eliminated

At the Battery Show North America, a panel of leaders addressed North America’s lithium supply challenges, and talked about signs that aggressive movement from...

Product Focus: Interplex Showcases Latest Motor Stator Busbar for EV Motors

At the Battery Show this week, Interplex, that powers e-mobility solutions of tomorrow by designing and manufacturing interconnect and mechanical products,...

Getting EV Battery Gigafactories Up to Speed

The term “gigafactory” has become common lexicon for a manufacturing facility constructed to produce the almost incalculable number of individual battery cells required for the millions of...

Product Launch: EA Elektro-Automatik Announces Battery Test System with High Power Density

EA Elektro-Automatik, a manufacturer of DC programmable power supplies, bidirectional power supplies and regenerative electronic loads, has announced...

EV Battery Recycling Still Being Defined

The efficient and economical recycling of EV batteries is not just possible, but inevitable, said a panel of battery-recycling experts at the 2023 Battery Show North America in Novi, MI, this week....

Solid-State EV Batteries Project to Low Penetration in 2030

Although the automotive industry sees solid-state batteries as the next game-changer for EV driving range, performance and safety, the technology is projected to penetrate the...

Tech Focus: A Production-Scale Microwave Plasma Process

6K Energy has developed the UniMelt® plasma process, a production platform to produce battery material, which reduces costs of materials by 50-70 percent, diminishes energy and water...

Product Launch: Advanced Energy Launches Liquid-Cooled Configurable Power Supply

Advanced Energy Industries, Inc., a provider of precision power conversion, measurement and control solutions announced a new high-power, liquid-cooled...

DNA Combined with Glass Results in a Stronger, Lighter Material

Researchers say that by building a structure out of DNA and then coating it with glass, they have created a very strong material with very low density.

How Much Do You Know About Drones?

Since they arrived on the scene around the turn of the century, drones have enhanced the applications of many different industries. So, how much do you know about drones and their technology? Find out with this quiz.

3D-Printed Ceramics Can Increase Gas Turbine Efficiency

Professor Stephen Lynch, of Penn State’s College of Engineering, along with colleagues at Michigan State University and the University of Wyoming, have developed a process for 3D printing a high-temperature ceramic gas turbine part.

New Products: September 2023 Photonics & Imaging Insider

LWIR Thermal Imaging Cores LightPath Technologies Inc. (Orlando, FL), has introduced through its subsidiary Visimid Technologies, new high framerate long wave infrared ("LWIR")...

Quantum Dot Breakthrough Could Create Cheaper Infrared Sensors

Scientists from the University of Chicago have demonstrated a way to create infrared light using colloidal quantum dots. The researchers said the method demonstrates great...

Can This New Camera Enable Lower Cost High-Speed Imaging?

Recording crystal-clear images of fast movements like falling water droplets or molecular interactions requires ultra-fast cameras that are capable of capturing millions of images...

New 'Lightning' System Combines Light and Electrons for Faster, Greener Computing

Computing is at an inflection point. Moore’s Law, which predicts that the number of transistors on an electronic chip will double each year, is slowing down...

Medtech’s New Normal

Medtech companies must adapt to a landscape that is now data-centric systems vs. equipment-centric.

Using Coffee to Reduce Waste from 3D Printing

Researchers have already experimented with using coffee grounds to 3D print jewelry, pots for plants, and even, fittingly, espresso cups. The technique is also simple enough that it will work on most low-cost, consumer-grade 3D printers.

How Much Do You Know About Wind Energy?

Wind energy is a big part of the mix of renewable energy sources. It brings to mind images of fields of giant windmills, but not a lot of detailed understanding. How good is your knowledge about our wind energy? Take this quiz to check it out.

A Li-ion Battery Material for Faster, More Efficient EV Charging

ORNL researchers recently developed a Li-ion battery material that not only recharges 80 percent of its capacity in 10 minutes but keeps that ability for 1,500 charging cycles.

New Material Will Burn Viruses, Not Skin

A new material uses Joule heating to decontaminate its surface of coronaviruses like SARS-CoV-2 in under 5 seconds, effectively killing at least 99.9 percent of viruses.

An Electrifying Collaboration: From the Lab to the Marketplace

Matthias Preindl, associate professor of electrical engineering at Columbia Engineering, and Wesley Pennington, the founder and CEO of Tau Motors, have formed a collaboration to...

Going the Distance for Better Wireless Charging

Accounting for radiation loss is the key to efficient wireless power transfer over long distances. Aalto University engineers have optimized the way antennas transmitting and receiving power...

Continuously Tunable Thermal Regulators for Batteries and Electronic Devices

Battery safety and performance in electronic devices and systems like battery thermal management, space conditioning, vehicle thermal comfort, and thermal energy...

My Opinion: Use the IIoT — Thoughtfully

The connected factory has a lot to offer, but getting it from the minds of the designers to a working system on the shop floor is not a simple process.

Wi-Fi that Can Read Through Walls

The technique has enabled, for the first time, imaging the English alphabet through walls with Wi-Fi, a task once deemed too difficult.

Soft Valve Technology Enables Sensing and Control Integration in Soft Robots

Soft inflatable robots have emerged as a promising paradigm for applications that require inherent safety and adaptability. However, the integration of sensing and...

Lehigh Researchers Make Sand That Flows Uphill

The team’s findings were published today in the journal Nature Communications. A corresponding video shows what happens when torque and an attractive force is applied to each grain — the...

Learning to Control a Robot

Researchers from MIT and Stanford University have devised a new machine-learning approach that could be used to control a robot, such as a drone or autonomous vehicle, more effectively and efficiently in dynamic...

The Gripen E Jet's New Li-ion Battery

Frank Puglia, EaglePicher's Director of Research and Development, is the guest on this episode of the Here's an Idea podcast to discuss the Gripen E jet’s new Li-ion battery.