A report proposes monopropellant microthrusters for a new generation of miniature spacecraft with mission lifetimes stretching into years. These thrusters would include micromachined nozzle/chamber assemblies containing microvalves, designed according to emerging concepts of microelectromechanical systems...

An excerpt from JPL Document D-12104 presents additional information on the control system of a steerable microwave antenna that is mounted on the roof of a land vehicle and used to communicate with a geostationary satellite. The antenna and control system were described previously in...

When a silicon wafer is cut from an ingot, it is essentially impossible to align the cut perfectly with the crystal structure. Therefore the surface contour of the wafer will be a flat plane on which terraces consisting of additional atomic layers will be scattered. An atomic step will be...

A report describes experiments on the wear-reducing performances of six additives to perfluoropolyether (PFPE)-based fluids in the boundary-lubrication regime. The additives were a phosphate, a thiophosphate, a β-diketone, a benzothiazole, an amide/thiol, and a sulfite. Each additive was...

Plasma windows can separate vacuum and atmosphere, or regions of high and low vacuums, in a way which facilitates transmission of various particle beams and/or radiation from low- to high-pressure regions. In a prototype device, a stabilized plasma arc...

Advanced aerobots that would be powered by solar photovoltaic batteries and that would be capable of storing energy for occasional operation during short intervals at power levels far beyond those of the photovoltaic batteries have been proposed. Aerobots are robotic balloon-buoyed airborne...

An improved process has been devised for acquiring and preparing trace amounts of airborne organic compounds for analysis by a gas chromatograph and mass spectrometer (GC/MS). A sample of air is passed through a cryotrap, where organic compounds and water vapor condense on the wall of a tube...

An improved system for measuring tensions in multiple bolts is based on the usual measurement of the times of propagation of ultrasonic waves along the bolts, but the quantities measured and the method of processing the measurement data differ from those of conventional ultrasonic bolt-tension...

A small, robust, lightweight, low-power-consumption instrumentation system has been proposed for determining the kinetic energies, masses, and other parameters of wind-borne particles. Originally intended for use in future exploration of Mars, the system might also prove useful on Earth for...

Electrostatic dispersion of drops of sprayed liquid fuel has been proposed as a technique for reducing the amount of soot formed during burning of the fuel. It is necessary to disperse fuel drops in order to reduce local concentrations of fuel-rich vapors, because such concentrations favor the...