Single-Shot Polarization Imaging System Provides Complete Picture

Researchers at the Harvard John A. Paulson School of Engineering and Applied Sciences have developed a compact, single-shot polarization imaging system that can provide a complete picture of polarization. Read on to learn more about it.

A Step Toward More Accurate 3D Object Detection

Scientists have developed multi-modal 3D object detection methods that combine 3D LiDAR data with 2D RGB images taken by standard cameras. While the fusion of 2D images and 3D LiDAR data leads to more accurate 3D detection results, it still faces its own set of challenges, with accurate detection of small objects remaining difficult. Read on to learn more about it.

Nail Penetration Adapter for Li-Ion Battery Testing

Innovators at NASA Johnson Space Center have designed a pneumatic nail penetration trigger system that drives a Li-ion battery cell into thermal runaway using a tungsten nail. Read on to learn more.

How to Detect Battery Failures Quicker

Batteries in electric vehicles can fail quickly, sometimes catching fire without much warning. Sandia National Laboratories is working to detect these failures early and provide sufficient warning time to vehicle occupants. Read on to learn more about it.

Building an Affordable Grid-Scale Alternative to Batteries

Researchers at Rice University have found a new way to improve a key element of thermophotovoltaic systems, which convert heat into electricity via light. Read on to learn more about it.

Why AI-Powered Engineering Matters in Automotive Design and Lightweighting

How can we implement new technology and meet market demand without compromising performance and quality? The answer is AI-powered engineering. Read on to learn more about it.

Executive Insights: Humanoid Robots

Despite their immense potential, humanoid robots face several challenges before they can achieve mainstream adoption. In this article, two industry executives — Melonee Wise, Chief Product Officer of Agility Robotics and Barry Phillips, Chief Commercial Officer of Apptronik — share their insights about the current state and future outlook for humanoid robots.

Navigating the Challenges of Motor Commutation

Motor commutation involves the process of switching between motor phases to ensure smooth, continuous operation. In this article, we’ll dive into the importance of commutation, explain how it works, and discuss the challenges faced when trying to pair different motors and drives, especially across brands.

New Products

See the new products, including igus' aluminum version of its drylin ® NT-60 telescopic rail; Tolomatic Inc.'s online Drive Integration Tool; Flexiv's KURAVIZON adaptive robot; Thomson Industries' upgrade to its stepper motor linear actuator online selector tool, which adds the ability to include encoders in the design process; and more.

Boosting Robotic Grasping Performance with Six Degrees of Freedom Dataset

A new study, published in the journal Results in Engineering, introduced a meticulously designed dataset aimed at enhancing the performance of 6D pose estimation algorithms. Read on to learn more.

3D-Printed Soft Robotic Joint Allows Greater Bending Angles

Researchers at Universidad Carlos III de Madrid have developed a new soft joint model for robots with an asymmetrical triangular structure and an extremely thin central column. This breakthrough, recently patented, allows for versatility of movement, adaptability and safety, and will have a major impact in the field of robotics. Read on to learn more.

A Training Method for Multiagent Systems Promises Safe Operation

A team of MIT engineers has developed a training method for multiagent systems that can guarantee their safe operation in crowded environments. Read on to learn more about it.

Gear Motors Help Put the Squeeze on Materials Requiring Dewatering

The applications that require dewatering are too numerous to list in their entirety. Dewatering is a process that — as its name suggests — separates fluids from solids, often converting what would otherwise go down the drain or end up in a landfill into saleable products. Read on to learn more about it and how gear motors come into play.

Cobot Cuts Cost and Risk While Boosting On-Time Delivery

Los Angeles-based plastics contract manufacturer Kal Plastics deployed UR10e trimming cobot for a fraction of the cost and lead time of a CNC machine, cut trimming time nearly in half, and reduced late shipments to under one percent — all while improving employee safety and growth opportunities. Read on to learn more.

Elevating Welding Operations with Collaborative Automation

Mesekon Oy, a Finnish welding manufacturer that produces complex welded steel structures for the marine, energy, and paper industries, needed a flexible and collaborative solution to improve efficiency, reduce defects, and enhance workplace ergonomics by automating repetitive and physically demanding welding operations. Read on to learn what Mesekon Oy did.

How Automakers Boost Quality via Servo-Electric Test Systems

Today, electrically actuated (servo-electric) test systems have emerged as a preferred alternative to servo-hydraulics that have traditionally been used. Michigan-based eMpulse Test Systems is a supplier of these advanced testing systems. Read on to learn more.

Ensuring the Quality of EV Batteries with CT-Scan Data Analysis and Visualization

Research and development aimed at optimizing both the technology and the cost of that most expensive of EV components — the battery — continues. Not only are the makers of current batteries under pressure to produce the highest-quality product, but they may also be considering how to participate and compete in the next-generations of these key components. Read on to learn more.

How Test Equipment Is Evolving to Keep Up with EV Batteries

Whatever technology is employed in the future, it is clear that battery test systems will continue to adapt to keep pace with changes in EV battery technology and production. Ensuring that you choose a future proof, scalable, and capable bi-directional DC source is critical in planning for testing success today and tomorrow. Read on to learn more.

New Products

See the new products, including KULR Technology Group's NASA-certified M35A battery cells; Nexperia's 650 V, 10 A silicon carbide (SiC) Schottky diode; Rotor Clip's patented InterShim™ Wave Spring design; and more.

Developing Advanced Recycling Technology to Restore Spent Battery Cathode Materials

A research team has developed a novel technology for directly recycling spent cathode materials from lithium-ion batteries through a simple process that addresses the limitations of conventional recycling methods. This innovative approach restores the spent cathode to its original state. Read on to learn more.

Safe and Energy-Efficient Quasi-Solid Battery for Electric Vehicles and Devices

A team of researchers from Japan has developed a non-flammable quasi-solid-state LIB that can overcome the limitations of conventional batteries. Read on to learn more.

A Triple-Layer Battery Resistant to Fire and Explosion

The triple-layer solid electrolyte features a robust middle layer that boosts the battery’s mechanical strength, while its soft outer surface ensures an excellent electrode contact, facilitating an easy movement of lithium ions. Read on to learn more.

A Quick and Easy Way to Produce Anode Materials for Sodium-Ion Batteries Using Microwaves

A research team led by Dr. Daeho Kim and Dr. Jong Hwan Park at the Nano Hybrid Technology Research Center of the Korea Electrotechnology Research Institute has developed a groundbreaking process technology that enables ultrafast, 30-second preparation of hard carbon anodes for sodium-ion batteries, using microwave induction heating. Read on to learn more.

For EV Safety Tests, AI Is Here to Help

It’s important to note that skepticism toward AI is reminiscent of past attitudes toward now-standard technologies. Thirty years ago, tools such as CFD were met with trepidation — an attitude defined by limited understanding. Today, engineers see them as indispensable. Similarly, adopting AI requires a shift in perspective and embracing its potential.

Thermal Management Lies at the Heart of EV Innovation

Along with rapid innovation in cooling methods, a major trend in EV thermal management is the use of technology to better design more thermally efficient vehicle architectures. AI and digital technologies have been major boons to the engineering toolkit for better design, helping to radically speed up system testing and development. Read on to learn more.

How MXenes Can Improve Air Filtration

An interdisciplinary team of researchers has introduced a new way to improve textile-based filters by coating them with a type of two-dimensional nanomaterial called MXene.