Features

Improving Surveying Efficiency by Using Robots and Precision Positioning

In partnership with Point One, Civ Robotics is ensuring that precise construction layouts won’t be at odds with efficiency. Land surveying is a critical stage in the construction layout process, during which workers use various forms of global navigation satellite systems (GNSS) to mark specific locations for builders. Read on to learn more.

Pioneering Precision: The Fusion of AI Vision and Cobots in Manufacturing

The integration of collaborative robots, or cobots, into manufacturing has revolutionized traditional processes, offering an unprecedented blend of precision, productivity, and safety. Now, with advancements in AI and visual detection systems, cobots are evolving further, equipped to adapt their actions based on visual cues. Read on to learn more.

Remote Robot Monitoring and Error Recovery Boosts Integrator Capacity, Slashes Downtime

When a robot cell experiences unplanned downtime, John Bridgen’s first priority as Director of Customer Satisfaction at Precision Cobotics is finding out exactly what happened. Traditionally, this “root cause analysis” and subsequent debugging has required onsite visits and, at least initially, a degree of guesswork. Read on to learn how the process has been ameliorated.

Compact Chip Converts Light into Microwaves for Super-Accurate Timing

NIST Physicist Franklyn Quinlan leads one of a group of teams working to shrink a table-top system of precise timing technology down to a single integrated chip. This will significantly increase the stability of timing signals used for applications such as GPS, phone and internet connections, and radar.

NASA’s Network of Small Moon-Bound Rovers Is Ready to Roll

A trio of small rovers that will explore the Moon in sync with one another are rolling toward launch. NASA JPL’s CADRE rovers will soon map the lunar surface together as a tech demo to show the promise of multirobot missions.

Powering the Wireless Arthroscopic Camera

The first FDA-cleared wireless arthroscopic camera for minimally invasive knee surgeries and other orthopedic procedures got early support from NASA.

5Ws of the Miniature Brain Stimulator

Rice University engineers have developed the smallest implantable brain stimulator demonstrated in a human patient that could revolutionize treatment for drug-resistant depression and other psychiatric or neurological disorders.

Catching Lightning With Phantom Cameras

Astroparticle Physicist Dr. Rasha Abbasi, an Assistant Professor in the Department of Physics at Loyola University Chicago, works with the Telescope Array project. Located west of Delta, Utah, the project is an international collaboration between universities to observe high-energy cosmic rays. Abbasi and her team study how TGFs originate from the Earth’s atmosphere and propagate. In particular, the team hopes to answer key questions.

The New Industrial Edge Ecosystem for Machine Vision

Siemens is collaborating with Basler and MVTec in its open Industrial Edge Ecosystem. The results are scalable, plug-and-play solutions that combine Siemens’ automation technology with third-party machine vision hardware and software.

Convolutional Neural Networks Enable Nighttime Imaging

Increasing regulatory concentration on improving the protection of vulnerable road users (VRUs) against vehicle collisions at night has led to new evaluations of proven imaging modalities that might quickly, effectively, and economically identify VRUs and measure their positions relative to moving vehicles.

O-RAN Redefining the Future of Wireless Connectivity

Ultimately, the success of the 5G Open Radio Access Network (5G O-RAN) deployments hinges on a multi-pronged approach involving a blend of collaboration, standardization, and advanced automated testing tools.

Enhancing Generative Design with Topology Optimization

Both generative design and topology optimization can be leveraged with the COMSOL® software, which also provides features for customizing automated designs so that they are suitable for specific manufacturing methods.

Building the Products of Tomorrow with the Comprehensive Digital Twin

By connecting all cross-domain models and data from across the product development, manufacturing, and usage lifecycles, the comprehensive digital twin forms the foundation for the digital transformation of a company, empowering adopters to surge ahead of the competition as they innovate faster and more efficiently.

Product of the Month

See the product of the month: e-con Systems' new IP67-rated high dynamic range (HDR), Power over Ethernet (PoE) camera — RouteCAM_CU22 — a powerful addition to its high-performance Ethernet camera series for tough outdoor conditions.

New Products

See the new products, including TRIOPTICS’ ATS alignment turning stations, VIAVI Solutions' expanded fiber optic test solutions portfolio, LumeDEL's fiberoptic collimating lenses, Teledyne FLIR's Neutrino LC OGI optical gas imaging camera module, and IDS' Sony sensor.

New Products

See the new products, including TDK-Micronas' further extended Micronas 3D HAL® position sensor family, AW-Lake’s TRICOR Coriolis Flow Meters, Kistler's new accelerometer series 8740A and 8788A, Melexis' MLX90830, and more.

New on the Market

See what's new on the market, including igus' iglide i230 3D printing material for selective laser sintering (SLS); Evident Corporation's advancements in operability and versatility; high-tech stainless steel measuring tape; PI Americas' series of air bearing-based optical delay line stages; and Emerson's DeltaV™ Edge Environment integrated software.

Precision Motion Control: Six Elements To Consider for Photonics and Optics Alignment Applications

Whether you are manufacturing, inspecting, aligning or bonding, it is essential to have a fundamental understanding of precision motion principles to effectively engage with suppliers and choose one who will maximize your effectiveness. An ideal motion supplier will navigate your precision motion control journey alongside you as a partner who is invested in your longterm success.

Properly Tolerancing Aspheric Lenses to Balance Cost and Performance

Understanding how to effectively tolerance aspheres is an incredibly useful communication tool to get the most out of your lens. In this article, we will provide some context behind asphere tolerances, exploring the factors that influence cost and performance.

Sensors — Powering the Future of Transportation

The next generation of sensors needs to maintain efficiency and cost-effectiveness while ensuring fast, accurate, and reliable communication.

Digital Twins for Industry

To learn about the use of digital twins for machining operations in industry, we interviewed Gisbert Ledvon, VP of Marketing at HEIDENHAIN Corporation, Schaumburg, Illinois. Click to read the full interview.

Better LIDAR in Autonomous Systems Starts with MEMS

The global market for automotive LIDAR is expected to grow from $332 million in 2022 to more than $4.5 billion by 2028. We interviewed Eric Aguilar, co-founder and CEO of Omnitron Sensors, Los Angeles, CA, to learn about a new MEMS scanning mirror that could accelerate the market adoption of LIDAR.

Microwave Sensing Technology Enables Versatile Imaging

Microwave sensing and imaging (MSI) technology, which has been in for many years, has now improved to the point that it may usefully supplement or even replace MRI machines and CT scanners in certain applications, including stroke detection and breast cancer detection.

Expanding Copernicus’s Earth Observation Program With Hyperspectral Imaging

The Copernicus program is a European Union (EU) initiative for Earth observation and environmental monitoring. Its primary objective is to provide accurate, timely, and reliable information for environmental and security purposes.

Products of Tomorrow

See the products of tomorrow, including Lightmatter's chip specializing in AI operations and its interconnect that facilitates data transfer between chips; implantable biomedical devices; and a metallic nanotube.

A New Wireless Tracking System Enhances the Extended Reality Experience

Aditya Arun and his team from the Wireless Communication Sensing and Network Group (WCSNG) at the University of California San Diego have developed an asset localization system that uses wireless signals to track physical objects with centimeter-level accuracy in real time, and then generates a virtual representation of these objects.

NASA’s Invention Puts a New Spin on Automotive Brake Rotors

NASA’s invention inspired an innovative design for a better automobile disc brake that’s much lighter and drastically improves the braking performance.

5Ws of the Dressing Robot

A bimanual dressing robot system developed at the University of York uses AI to mimic how caregivers assist humans in dressing.

New Products

See the new products, including ABB Robotics' expanded SCARA robot portfolio, Bodine's gearmotors, the C6675 control cabinet Industrial PC from Beckhoff, and KEB America's DL4 series of brushless servo motors.