Magazine

A test array has been developed to measure the response of pixel-integrated infrared gratings over a wavelength range from 3 to 13 μm for multiple grating geometries. This array allows for testing and for determining the performance of an infrared focal plane array camera before resources have been...

The James Webb Space Telescope (JWST) Integrated Simulation and Test (JIST) environment is a software-only system simulator that provides an environment to exercise JWST flight software subsystems and interfaces. JIST is capable of executing the unmodified flight software binaries in an operational...

As described in “JWST Integrated Simulation and Test (JIST) Core” (GSC-16739-1) on page 25, the JIST system is a software-based simulator that uses the James Webb Space Telescope (JWST) operational ground system, ground system command/telemetry databases, simulated flight...

Whispering gallery mode (WGM) res- onators have been suggested for use as reference cavities for laser stabilization. Because of their unique properties (small size, high stability, narrow line width), such application appears to hold great promise. It is...

Display devices play a vital role as the man-machine interface in most embedded domains. Display systems provide information regarding the health of safety-critical subsystems and the general status of the machine. Accuracy and precision of the information displayed is a key factor in proper machine operation. Hence,...

Thermal requirements and a need for a very flat mechanical interface led to the development of a copper doubler for the titanium vault on the Juno Spacecraft. The vault is designed to contain the science instruments on the spacecraft, protecting them from damage due to the extreme radiation...

Friction stir welding (FSW) has emerged as a promising solid-state process with encouraging results, particularly when used on high-strength aerospace aluminum alloys that are generally difficult to weld. Laser peening has been applied to the mechanical and fatigue properties of welded joints. Laser...

This methodology provides a guide consisting of design, testing, and structural analysis steps developed to assure positive strength margins of safety (MS) in critical brazed joints used for assembly of flight and non-flight structures.

Driving loads such as electric motors, relay coils, and solenoids requires a relatively large initial pull-in or start-up current from a driver in order to initiate operation of the load. To maintain continuous operation, the hold or running operating current required for a load may be 20%...

The invention is a radio frequency identity detector (RFID)-based system that assists a user in location of an item, in response to an electronic query for the status of the item. The item(s) being sought may be a book on a library shelf, an item from a store inventory, a legal or financial document, a medical...

Ionizing radiation has a detrimental effect on digital electronics that need to operate in extraterrestrial environments. As space missions become longer and more complex, there is a need for flight computers that can withstand harsh radiation environments...

In order to improve the safety and performance of lithium- ion cells, especially over a wide operating temperature range, a number of Li-ion electrolytes have been developed that contain flame-retardant additives in conjunction with fluorinated co-solvents to provide a safe,...

A coating has been developed that can be applied to spacecraft equipment to significantly increase the allowable touch temperature limit, while only marginally degrading the heat transfer to the environment.

This software reduces the workload of the mission manager by distributing selected aircraft data to the various investigators onboard the aircraft so they do not have to continuously request the data updates. This system will then send the investigator’s comments and observations that were previously written in notebooks to a server...

ACT is able to provide insight into acquisition, operational, and life-cycle affordability early in program formulation prior to a commitment of architecture, or anytime during the program to change systems or subsystems. ACT analyzes different systems or architecture configurations for affordability that...

A feature-added, interactive version of the video release entitled “Ascent” was developed. The software version contains the full HD (high definition) movie along with extra scenes, still imagery, a movie trailer, and producer notes. The software has been packed as an iOS app, intended for use on...

This iPhone/iPad application allows the general public to access information about the Cassini mission. It enables viewing of the latest images released by the mission, allows access to images that describe the present position of the spacecraft, and provides flyby countdowns for each targeted flyby.

(LWWE) is a cross-platform server that provides support for automation and orchestration of task execution.

ATHLETE (All-Terrain Hex-Limbed Extra-Terrestrial Explorer) is a multipurpose mobility platform for planetary surfaces. It is a cross between a wheeled rover and a walking robot, and travels using powered wheels mounted on the end of each of six robotic limbs. Each limb is a fully articulated robotic manipulator...

A computer program implements a model of the performance of the CheMin (Chemistry and Mineralogy) instrument — a miniaturized instrument that simultaneously performs x-ray diffraction (XRD) and x-ray fluorescence (XRF) measurements on small material samples. The CheMin instrument is being...

This software specializes in discovering the location and intrinsic parameters of an imaging camera when such information was not recorded in the metadata of an image. It provides a simple command line interface for specifying the input and output for the two camera perspectives.