Electronics & Software

Particle filters (PFs) offer the possibility of addressing many unsolved problems in orbit determination and prediction. This work builds on an existing GSRP (Graduate Student Researchers Project) effort to incorporate a particle filter into GSFC’s (Goddard Space Flight...

A quantity called “the conserved scalar” is very important in the modeling of turbulent reactive flows in large eddy simulations because, if it can be defined, it numerically simplifies the solution of the conservation equations by confining the reaction term to a...

A common objective for primitive body missions (i.e., those to asteroids, comets, and small planetary moons) is to map the target body surface as completely as possible. Ideally, this map is constructed from a large collection of images containing multiple views of every point on the...

Research on using inexpensive and personal-level parallel computing architectures to speed up the implementations of the class of particle filters has been conducted. This study leverages NVIDIA Graphics Processing Units (GPUs) and multi-core CPUs (central processing units) that are quickly becoming commonly...

Modern datasets consisting of retrievals from space-based missions have target results, but often are accompanied by hundreds or thousands of other retrieved parameters or facts regarding a particular retrieval (e.g., pressure, temperature, spectral...

A number of deep space missions have imaged plumes at Io, Enceladus, and other smaller bodies. These phenomena provide valuable information regarding these bodies. To date, this imagery has been captured fortuitously. The ability to utilize onboard processing to conduct campaigns capturing large numbers...

A software application detects the heart rate of an individual by using a real-time video stream from a common camera connected to their computer. This involves no contact between the user and the camera, or calibration between individual users. NASA’s...

A characterization software suite was developed to facilitate NASA’s in-flight characterization of commercial remote sensing systems. Characterization of aerial and satellite systems requires knowledge of ground characteristics, or ground truth. This information is...

A dual-polarized, wide-bandwidth (200 MHz for one polarization, 100 MHz for the orthogonal polarization) antenna array at P-band was designed to be driven by NASA’s EcoSAR digital beam former. EcoSAR requires two wide P-band antenna arrays mounted on the wings of an aircraft,...

The Orion CEV Northstar ASIC (application-specific integrated circuit) project required a DDR (double data rate) memory bus driver/receiver (DDR PHY block) to interface with external DDR memory. The DDR interface (JESD79C) is based on a source synchronous strobe (DQS\) that is sent along with...

Autonomous Underwater Vehicles (AUVs) are becoming increasingly important for military surveillance and mine detection. Most AUVs are battery powered and have limited lifetimes of a few days to a few weeks. This greatly limits the distance that AUVs can travel underwater. Using a series of submerged AUV charging...

This work involved placing a commercial Ethernet PHY on its own power boundary, with limited current supply, and providing detection methods to determine when the device is not operating and when it needs either a reset or power-cycle. The device must be radiation- tested and free of...

STAMPS simulates either three- or six-degree-of-freedom cases for all spacecraft flight phases using translated HAL flight software or generic GN&C models. Single or multiple trajectories can be simulated for use in optimization and dispersion analysis. It includes...

Within the Consultative Committee for Space Data Systems (CCSDS), there is an effort to standardize data transfer between ground stations and control centers. CCSDS plans to publish a collection of transfer services that will each address the transfer of a particular type of data (e.g.,...

Mars lander spacecraft, beginning with Mars Pathfinder (MPF), have been designed to tolerate flight computer resets during the entry, descent, and landing (EDL) phase despite having only a single flight computer. This capability was enabled by a predictable, nondynamic EDL architecture. The Mars...

Sculptor® is a commercially available software tool, based on an Arbitrary Shape Design (ASD), which allows the user to perform shape optimization for computational fluid dynamics (CFD) design. The developed software tool provides important advances in the state-of-the-art of automatic CFD shape...

This program was developed to fill a need within the Wallops Flight Facility workflow for automation of the development of vertical plan limit lines used by flight safety officers during the conduct of expendable launch vehicle missions.

Hyperspectral imaging systems onboard aircraft or spacecraft can acquire large amounts of data, putting a strain on limited downlink and storage resources. Onboard data compression can mitigate this problem but may require a system capable of a high throughput. In order to achieve a high throughput...

For planning of Mars surface missions, to be operated on a sol-by-sol basis by a team on Earth (where a “sol” is a Martian day), activities are described in terms of “sol types” that are strung together to build a surface mission scenario. Some sol types require ground...

Simple and effective learning functions and adaptive elements can be placed into small hardware systems to include instruments for space, bioimplantable devices, and stochastic observers.

Optical ranging is a problem of estimating the round-trip flight time of a phase- or amplitude-modulated optical beam that reflects off of a target. Frequency-modulated, continuous-wave (FMCW) ranging systems obtain this estimate by performing an interferometric...

A method has been developed to create an airfoil robust enough to operate satisfactorily in different environments. This method determines a robust, optimal, subsonic airfoil shape, beginning with an arbitrary initial airfoil shape, and imposes the necessary constraints on the design. Also, this method is...

The water-vapor continuum absorption plays an important role in the radiative balance in the Earth’s atmosphere. It has been experimentally shown that for ambient atmospheric conditions, the continuum absorption scales quadratically with the H2O number...

Ka-band ranging provides the phase center (PC) to phase center range, which needs to be converted to the center of mass (CM) to center of mass range. Nominally, both PC and CM lie on the line connecting the spacecraft GRAIL A and GRAIL B. In this case, the conversion should be done simply by...

A family of schemes has been devised for organizing the output of an algorithm for predictive data compression of hyperspectral imagery so as to allow efficient parallelization in both the compressor and decompressor. In these schemes, the compressor performs...