Photonics & Imaging

A report describes experiments in which nonintrusive optical diagnostic techniques were applied to high-pressure fuel sprays in simulated advanced turbine-engine combustor environments. The experiments involved three different fuel injectors in two unique optically accessible combustors: a...

"Pushbroom" imaging spectrometers of a proposed type would exhibit little or no distortion in either the spectral or spatial direction. These spectrometers would feature modified Offner optics, which afford a desirable combination of compactness and a high degree of optical correction. Although Offner optics...

Cross-talk in integrated-circuit focal-plane arrays of quantum-well photodetectors (QWIPs) equipped with microlenses would be reduced, according to a proposal, by etching deep trenches into the substrates of these devices. The proposal applies, more specifically, to GaAs-based,...

The MacWafer™ code computes gravitational and thermal stresses in silicon wafers and uses these results to determine the maximum allowable temperature variation across a wafer, maximum processing temperatures, and maximum allowable heating and cooling rates. This information is of particular...

Inventors at the Cornell Research Foundation have devised a method of selective metallization of high-temperature semiconductors to produce ohmic or rectifying contacts. The process consists of three phases: a lithographic step to define the areas of contact, preparation of the...

A planar array of microscopic diffractive optical elements that resemble macroscopic Fresnel lenses can be fabricated as an array of continuous relief patterns on a GaAs substrate by a procedure that includes the transfer of a corresponding array of patterns formed on a surface layer of poly(methyl...