Photonics & Imaging

LDSD (Low Density Supersonic Decelerator) is a Mars EDL (entry, descent, and landing) Technology Development Project that launches three test vehicles out of the Pacific Missile Range Facility in Kauai. On the test vehicle, most mission science data can be recorded safely on land;...

A document discusses the Ultra Compact Cloud Physics Lidar, a biaxial lidar with a narrow receiver field of view. It requires tight optical alignment between the transmitter and receiver paths while flying on various aircraft over various temperatures and in the presence of vibration. To achieve...

The Passive Aerosol Cloud Suite (PACS) is an imaging polarimeter that employs wide field-of-view (FOV) optics to obtain a highly accurate polarimetric signal across an image with hyperangle, multiangle views. PACS is designed to measure the array of parameters necessary to retrieve aerosol and cloud microphysical...

A new method has been developed to create coherent laser light efficiently with direct optical coupling of the Sun’s energy into the gain medium for multiple uses. New advances in solar cell photovoltaic (PV) technologies have greatly improved their efficiencies, mostly...

This work focused on a manufacturing process to produce silicon carbide optical surfaces with low mid-spatial surface errors. Mid-spatial frequency (MSF) and high-spatial frequency (HSF) surface errors in the grinding of fast aspheres are amplified in hard ceramics like silicon carbide due to cyclic tool wear rates,...

Recently, there is widespread interest in the development of chemical and biochemical sensors based on plasmonic resonance of metallic nanostructures. In the localized surface plasmon resonance (LSPR) for nanometer-sized metallic structures, a resonant oscillation of the conduction...

Visual odometry (VO) refers to the estimation of vehicle motion using onboard cameras. A common mode of operation utilizes stereovision to tri angulate a set of image features, track these over time, and infer vehicle motion by computing the apparent point cloud motion with respect to the cameras. It has...

Orbital rendezvous and docking of two spacecraft is a topic of continued interest to NASA. For crewed missions, it is frequently the case that the target is cooperative (i.e., is equipped with some sort of navigation aid). If one of the relative navigation instruments is a Flash LIDAR,...

A novel optical design for imaging systems is able to achieve an ultra-wide field of view (UW-FOV) of up to 208°. The design uses an integrated optical design (IOD). The UW-FOV optics design reduces the wasted pixels by 49% when compared against the baseline fisheye lens. The IOD approach results in a...

Visual odometry (VO) refers to the estimation of vehicle motion using onboard cameras. A common mode of operation utilizes stereovision to tri angulate a set of image features, track these over time, and infer vehicle motion by computing the apparent point cloud motion with respect to the cameras. It has...

Machine learning techniques have shown considerable promise for automating common visual inspection tasks. For example, Support Vector Machine (SVM) classifiers that have been learned from labeled training data deliver strong detection performance both for finding human faces in...

A software application detects the heart rate of an individual by using a real-time video stream from a common camera connected to their computer. This involves no contact between the user and the camera, or calibration between individual users. NASA’s...

A complete demonstration breadboard unit for advanced development as a high-TRL (technology readiness level) system has been constructed and characterized. Infusion of several new component technologies, such as ceramic:YAG material and high-power laser diode arrays (LDAs),...

The Twin Head Efficient Oscillator (THEO) concept uses a pair of smaller, identical laser pump modules, oriented to remove asymmetrical thermo-optical effects typical in single-slab lasers such as HOMER (High Output Maximum Efficiency Resonator), MLA (Mercury...

Aerosols in planetary atmospheres have a significant impact on the energy balance of the planets, yet are often poorly characterized. An in situ instrument was developed that would provide more diagnostic information on the nature of aerosols it encountered if deployed on a planetary descent probe. Previous probe...

Monolithic ridge-waveguide GaSbbased diode lasers were fabricated with a second-order, laterally etched Bragg grating to generate single-mode emission from InGaAsSb/AlGaAsSb multiquantum- well structures. In this design, the monolithic Type-I GaSb-based diode lasers use grating...

The purpose of this innovation is to be able to deliver, individually or simultaneously, multiple microwave high-frequency bands including, but not limited to, L (1.5 GHz), C (7 GHz), X (8.4 GHz), Ku (14.5 GHz), Ka (32 GHz), and Q (38 GHz) frequencies at high data rates and with...

A document describes a fiber/solid-state hybrid seeded regenerative amplifier capable of achieving high output energy with tunable pulse widths for satellite laser ranging (SLR) applications. The diode-pumped solid-state...

Apart from the fundamental interest of discovering the physical effects that are behind the light-matter interaction processes that make it possible, slowing and storing light currently attracts a lot of attention because the ability to control the propagation speed of optical pulses, to...

A document discusses the CCD97 from e2v technologies as it is being evaluated at Goddard Space Flight Center’s Detector Characterization Laboratory (DCL) for possible use in ultra-low background noise space astronomy applications, such as Terrestrial Planet Finder Coronagraph...

Central to the advancement of both satellite and in-situ science are improvements in continuous-wave and pulsed infrared laser systems coupled with integrated miniaturized optics and electronics, allowing for the use of powerful, single- mode light sources aboard both satellite and...

A fiber/solid-state hybrid seeded regenerative amplifier, capable of achieving high output energy with tunable pulse widths, has been developed for satellite laser ranging applications. The regenerative amplifier cavity uses a pair of Nd:YAG...

X-ray optics were fabricated with the capability of imaging solar x-ray sources with better than 0.1 arcsecond angular resolution, over an order of magnitude finer than is currently possible.

Optical systems consisting of a series of optical elements require alignment from the input end to the output end. The optical elements can be mirrors, lenses, sources, detectors, or other devices. Complex optical systems are often difficult to align from...

The Planetary Image Atlas (PIA) is a Rich Internet Application (RIA) that serves planetary imaging data to the science community and the general public. PIA also utilizes the USGS Unified Planetary Coordinate system (UPC) and the on-Mars map server.

This software automatically calibrates a camera or an imaging array to an inertial navigation system (INS) that is rigidly mounted to the array or imager. In effect, it recovers the coordinate frame transformation between the reference frame of the imager and the...