Sensors/​Data Acquisition

The development of the self-diagnostic accelerometer (SDA) is important to both reducing the in-flight shutdowns (IFSD) rate — and hence reducing the rate at which this component failure type can put an aircraft in jeopardy — and also as a critical enabling technology for future...

Wide-temperature and extreme-environment electronics are crucial to future missions. These missions will not have the weight and power budget for heavy harnesses and large, inefficient warm boxes. In addition, extreme-environment electronics, by their inherent nature, allow...

For effective range safety, global positioning system (GPS) metric tracking must be robust to interference with, and jamming of, GPS signals. The conventional approach to mitigating interference and jamming is to use a Controlled Reception Pattern Antenna (CRPA)....

In order to develop a software-only test environment for the James Webb Space Telescope (JWST) mission, a solution was needed to send commands and receive telemetry between the TCTS (Telemetry and Command Test Set) and CMM-S card. The as-is solution requires the utilization of commercial...

Insulation systems usually do not operate on their own; they must work together with a structural system that is designed to support the article being insulated. Typically this structure penetrates the insulation, degrading it in some manner, and gives a pathway for...

Human subjects are unsuitable for objective performance testing of victim detection radar because their heart and respiration rates are not controllable or repeatable. There are limitations on human targets from a safety standpoint as well. It is difficult to relate the ground truth to...

Wide-temperature and extreme-environment electronics are crucial to future missions. These missions will not have the weight and power budget for heavy harnesses and large, inefficient warm boxes. In addition, extreme-environment...

Wide temperature and extreme environment electronics are crucial to future missions. These missions will not have the weight and power budget for heavy harnesses and large, inefficient warm boxes. In addition, extreme environment electronics, by their...

Phase retrieval (PR) and Shack-Hartmann Sensor (SHS) are the two preferred methods of image-based wavefront sensing widely used in various optical testbeds, adaptive optical systems, and ground- and space-based telescopes. They are used to recover the phase information...

Metamaterials, or artificial negative index materials (NIMs), have generated great attention due to their unique and exotic electromagnetic properties. A negative dielectric constant material, which is an essential key for creating the NIMs, was developed by doping ions into a...

A thin-film magnetic thermometer with integrated, superconducting quantum interference device (SQUID) readout has been designed for fast, precision temperature measurements in the 10-mK range. The compact magnetic thermometer consists of a miniature DC SQUID susceptometer with a...

Large axial load forces and extreme temperature ranges are typical for scientific balloon missions. Therefore, a durable, flexible, and thermally stable sensor material is needed. In this innovation, sensors have been designed to be integrated onto...

A miniature, low-power, solid-state detector for ionizing radiation was developed for use in more locations, and requiring less space and lower power than current technology. An accepted way of counting high-energy charged particles common in space radiation is to detect the light...

The accuracy of spaceborne sensors measuring reflected solar radiance can be affected by multiple factors. First, instruments with complex optics are sensitive to polarization. The response of such instruments is characterized before launch; however, sensitivity to polarization can change on orbit...

Stennis Space Center (SSC) is one of three government-operated rocket engine test facilities in the United States and is the primary center for testing and flight-certifying rocket propulsion systems for future space vehicles. Safety...

A wireless, connection-free, open circuit technology can be used for developing electrical devices like sensors that need no physical contact with the properties being measured. At the core of the technology is the SansEC (Sans Electrical Connections) circuit that is damage-resilient and...

The UAVSAR (Uninhabited Aerial Vehicle Synthetic Aperture Radar) ground data processing infrastructure facilitates a wide range of mission operational processes through a centralized database, Web-enabled interfaces, and background automation. By...

The guarded flat plate insulation test cryostat (Cryostat-500) is a boil-off calorimeter comprising a flat-bottom test apparatus for measuring the absolute thermal performance of an insulation test article. Typical dimensions allow accepting test specimens 200 mm in diameter by up to 30 mm thick. The test...

The Inductive Monitoring System (IMS) software tool uses data mining techniques to automatically characterize nominal system operation by analyzing archived system data. These nominal characterizations are then used to perform near-real-time system health monitoring or to analyze...

When a person is interviewed, some of the answers may be inaccurate, or even deceptive, because the person may have either incomplete information, is telling only part of the truth, or is fabricating a false answer, or a combination of all three. When the person is habitually making...

The determination of local geodetic parameters for VLBI (very-long-baseline interferometry) antennas is traditionally done by conventional surveying techniques. These techniques are laborious and error-prone. The objective here was to develop a space geodesy method of measuring the parameters to make it easy to...

Knowledge of a patient’s cardiac age, or “heart age,” could prove useful to both patients and physicians for encouraging lifestyle changes that are potentially beneficial for cardiovascular health. This may be particularly true for patients who exhibit symptoms, but who test negative for cardiac...

A new program has been written that utilizes advanced numerical methods to perform high-precision, sub-pixel volume measurements of samples that are processed containerlessly. The volume measurements are essential for the measurement of density and thermal...