Electrical/​Electronics

New circuits have been designed and fabricated with operating frequencies over 325 GHz. In order to measure S-parameters of these circuits, an extensive process of wafer dicing and packaging, and waveguide transition design, fabrication, and packaging would be required. This is a costly and...

A technique was developed to provide a reconfigurable high-precision microwave electrical phase delay for resonators and phase shifters. The invention employs multiple branches of transmission lines with open-ended or ground-ended terminations as...

Exponential growth in microelectronics technology such as field-programmable gate arrays (FPGAs) has enabled high-performance spaceborne instruments with increasing onboard data processing capabilities. As a commonly used digital signal processing (DSP) building...

There is a need to provide a portable and cost-effective galvanic isolation between ground support equipment and flight hardware such that any unforeseen voltage differential between ground and power supplies is eliminated. An interface board was designed for use between the ground support...

A paper describes advanced ceramic column grid array (CCGA) packaging interconnects technology test objects that were subjected to extreme temperature thermal cycles. CCGA interconnect electronic package printed wiring boards (PWBs) of polyimide were...

DfR Solutions (College Park, MD) has launched Sherlock automated design analysis software for analyzing, grading, and certifying the expected reliability of products at the circuit card assembly level. The software's intuitive commands and ease of use enable usage among a broad range of engineers and managers,...

Synopsys, Inc. (Mountain View, CA) has introduced DC Explorer, the latest addition to the Galaxy™ Implementation platform, to speed up development of high-quality design data. DC Explorer delivers 5X faster runtime and 10 percent timing and area correlation to DC Ultra™ RTL Synthesis. It also tolerates incomplete design...

There is a great need for oxygen microsensors for aerospace and commercial applications. Current bulk or thick-film solid electrolyte oxygen sensors have the disadvantages of being large in size, high in power consumption, difficult to batch-fabricate, and high in cost.

Virtual Sensor Test Instrumentation is based on the concept of smart sensor technology for testing with intelligence needed to perform sell-diagnosis of health, and to participate in a hierarchy of health determination at sensor, process, and system levels. A virtual sensor test instrumentation consists of five...

Basis functions were studied and identified that provide efficient and accurate solutions for the induced patch currents and the reflection phase in microstrip reflectarrays. The integral equation of an infinite array of microstrip elements in the form of...

Current and future near-Earth and deep space exploration programs and space defense programs require the development of robust intra-spacecraft serial data transfer electronics that must be reconfigurable, fault-tolerant, and have the ability to operate effectively for long periods of time...

A document describes a system to reliably gather the hang-angle inclination of the orbiter. The system comprises a wireless handheld master station (which contains the main station software) and a wireless remote station (which contains the inclinometer sensors, the RF transceivers, and the remote...

This circuit design implements an integrator intended to allow digitization of the energy output of a pulsed laser, or the energy of a received pulse of laser light. It integrates the output of a detector upon which the laser light is incident. The integration is performed constantly, either by...

In recent years, some remote-sensing applications require advanced airborne multi-sensor systems to provide high performance reflective and emissive spectral imaging measurement rapidly over large areas. The key or unique problem of characteristics is associated with a black box back-end system...