Stories
8,33,42,44,45,47,52,54,68
61
0
10380
30
Briefs: Electronics & Computers
An improved method of closed-loop synchronization of a radio receiver with the phase of a carrier signal modulated by Gaussian minimum-shift keying (GMSK) has been proposed....
Briefs: Software
A computer program provides capabilities for numerical simulation and analysis of the thermodynamic performance of aircraft or automotive gas turbine engines. The program was developed...
Briefs: Information Technology
A method to detect and to characterize the type of nonlinear dynamics in an aeroelastic system involves the utilization of information from wavelet processing of measurement data....
Briefs: Software
Automotive interior noise has become a critical consideration for manufacturers. Many studies have shown that interior noise in a vehicle has a major impact on the customer's perception of...
Briefs: Information Technology
Mechanical System Design/Analysis Tool (MSAT) is a user-friendly software system that facilitates and accelerates the processes of synthesizing and analyzing designs of mechanical systems. MSAT is...
Briefs: Information Technology
Development of Flight Software for Small Explorer Spacecraft
A report describes a continuing program of development of flight software for the attitude-control system (ACS) and the command-and-data-handling (C&DH) system of a prototype standard spacecraft of the Small Explorer (SMEX)-Lite class. Both the C&DH and ACS parts of the software...
Briefs: Electronics & Computers
A variable-frequency, three-phase, sine-wave generator circuit has been designed for use as a source of polyphase excitation in studies of the propagation of traveling waves in plasmas. This circuit, combined...
Briefs: Software
Program Estimates Loads in Launch Vehicles
Version 1.4 of the Launch Vehicle Loads Analysis for Preliminary Design (VLOADS 1.4) computer program calculates in-flight launch-vehicle structural loads (that is, spacecraft-launching rockets) for preliminary design. The program can also be used to calculate structural loads in upper stages and...
Briefs: Electronics & Computers
Wiring is a major deliverable in just about all electromechanical equipment. From airplanes to semiconductor capital equipment, the key component tying together all of the technological innovations in...
Briefs: Software
Software for Detecting Anomalies and Responding to Faults
The Automated Test Monitor computer program provides for continuous monitoring of the operations of a complex system (e.g., a spacecraft). This program implements a rigorous analytic (instead of an ad hoc) technique that prescribes exactly how to express requirements for the operation of...
Briefs: Information Technology
Program Generates Graphics To Help in Planning Space Flights
The Mission Planning Graphical Tool (MPGT) computer program provides a mouse-driven graphical representation of data on a spacecraft and its environment, for use in planning a space flight. MPGT is designed to be a generic software tool that can be configured to analyze any specified...
Briefs: Electronics & Computers
Low-voltage high-current loads requiring precision voltage regulation are served by power systems that sense voltage remotely at the load. This creates the risk of an overvoltage (OV) condition at the load...
Briefs: Information Technology
Parallel Visual 3 (pV3) is an interactive computer program that provides selected displays of data generated in numerical simulations - especially simulations that involve parallel...
Briefs: Electronics & Computers
A microwave-cavity applicator has been developed for coating multiple fibers by chemical vapor deposition (CVD). A prototype of the applicator was used to deposit silicon carbide onto...
Briefs: Energy
Separating Ethanol From Water Via Differential Miscibility
The differential miscibility of castor oil in ethanol and water would be exploited to separate ethanol from water, according to a proposal. Burning the separated ethanol would produce more energy than would be consumed in the separation process. In contrast, the separation of a small amount...
Briefs: Electronics & Computers
A seven-element microstrip patch antenna is designed to operate with circular polarization and high gain at a frequency of 2.2875 GHz. The antenna was developed in the early 1990s as a potential...
Briefs: Electronics & Computers
Monolithic microwave integrated-circuit (MMIC) frequency converters have been developed for use in satellite- and ground-based communications (see figure) at frequencies from about 18 to about...
Briefs: Electronics & Computers
Integrated Environmental Monitoring System for Clean Rooms
A system of electronic monitoring equipment under central computer control records and displays the readouts of environmental-quality instrumentation in clean rooms in the Space Station Processing Facility at Kennedy Space Center. The instruments include airborne-particle counters,...
Briefs: Electronics & Computers
Improved successive-approximation analog-to-digital converter (ADC) circuits are undergoing development for eventual incorporation into focal-plane arrays of photodetectors. These...
Briefs: Electronics & Computers
A series-connected boost regulator (SCBR) is, as its name suggests, an electronic circuit for boosting a power-supply voltage to a higher and regulated value. The distinguishing feature of an SCBR is an...
Briefs: Electronics & Computers
Redundant fiber-optic transceivers have been incorporated into the High Speed Data Acquisition System (HSDAS) at Stennis Space Center, where they are used to communicate data acquired by...
Briefs: Electronics & Computers
Improved circuits that generate high-voltage pulses for driv-ing Q-switched lasers have been devised. To extract maximum energy from a laser cavity in the form of consistent laser pulses, the Q-switch pulses must rise...
Briefs: Software
The OMNI time and attendance system is a workstation software system for automated, centralized recording of work time and attendance, and for flexible scheduling of work by...
Briefs: Information Technology
Documents on Flight Software for the SAMPEX Spacecraft
A collection of four documents contains information on various aspects of the flight software of the Solar Anomalous and Magnetospheric Particle Explorer (SAMPEX) spacecraft. The first document is part of a longer paper that presents design requirements for the software; the information in...
Briefs: Electronics & Computers
A complementary metal oxide/semiconductor (CMOS) integrated-circuit video image detector of the active-pixel-sensor (APS) type has been designed to implement programmable...
Briefs: Information Technology
The Radiographic Imaging Performance Support System (RIPSS) is a developmental computer network intended to serve as (1) a central electronic archive for the storage, retrieval, and...
Briefs: Electronics & Computers
Relatively inexpensive, lightweight biplates for methanol fuel cells have been proposed. The reductions in weight and cost, relative to biplates now used in methanol fuel cells, would be...
Briefs: Information Technology
Program Estimates Run Time on a Parallel Computer
The Pathcalc computer program estimates the time needed to execute a given application program on a parallel computer of given computation and network capabilities. Pathcalc can be used to analyze the effects of changes in such parameters as central-processing-unit (CPU) speed, network bandwidth,...
Briefs: Electronics & Computers
The Shuttle Projects Information Frontier (SPIF) Telemetry and Command Processor (TAC) is a personal-computer-based data-handling system that serves as part of an interface for transfer...
Top Stories
Blog: Manufacturing & Prototyping
2025 Holiday Gift Guide for Engineers: Tech, Tools, and Gadgets
Blog: Power
Using Street Lamps as EV Chargers
INSIDER: Semiconductors & ICs
Scientists Create Superconducting Semiconductor Material
Blog: Materials
This Paint Can Cool Buildings Without Energy Input
Blog: Software
Quiz: Power
Webcasts
Upcoming Webinars: AR/AI
The Real Impact of AR and AI in the Industrial Equipment Industry
Upcoming Webinars: Motion Control
Next-Generation Linear and Rotary Stages: When Ultra Precision...
Podcasts: Manufacturing & Prototyping
SAE Automotive Engineering Podcast: Additive Manufacturing
Podcasts: Defense
A New Approach to Manufacturing Machine Connectivity for the Air Force
On-Demand Webinars: Manufacturing & Prototyping
Streamlining Manufacturing with Integrated Digital Planning and Simulation

