Stories
36
0
2220
30
Products: Manufacturing & Prototyping
An IC and module from Sendyne (New York, NY) performs ground fault detection and isolation monitoring while simultaneously measuring current, voltage, and temperature. The AEC-Q100-qualified SFPGFD adheres to international...
Products: Sensors/Data Acquisition
Allegro MicroSystems (Worcester, MA) offers two new current sensor ICs for AC or DC current sensing. Both the ACS724KMA (5 V) and the ACS725KMA (3.3 V) are set in a high-isolation SOIC16 wide-body surface mount package that provides...
Products: Sensors/Data Acquisition
The IGA 140/23 pyrometer from LumaSense Technologies (Santa Clara, CA) offers non-contact temperature measurement on metals, ceramics, and graphite. The device, equipped with RS232 and RS485 serial interfaces, reads parameters via...
Products: Sensors/Data Acquisition
Fluke (Everett, WA) has announced the 279 FC TRMS Thermal Multimeter. The test tool integrates a digital multimeter (DMM) with a thermal camera. Using the 279 FC imager, technicians can check for hot spots in fuses, wires,...
Products: Manufacturing & Prototyping
Toshiba America Electronic Components (San Jose, CA) has released a group of 30 microcontrollers (MCUs) based on the ARM® Cortex®-M3 core. The M3H MCUs are fabricated with an embedded flash memory process. Target...
Products: Manufacturing & Prototyping
An electromechanical function from Kiekert AG (Heiligenhaus, Germany/Wixom, MI) prevents car doors from unintentionally striking nearby obstacles. The “i-protect” technology features a door-brake and sensor system for...
Products: Robotics, Automation & Control
Mitsubishi Electric Automation (Vernon Hills, IL) introduced the iQ-R Series machine control system that incorporates sequence, motion, safety, process, and C language control into one platform. The control platform is...
Products: Robotics, Automation & Control
The Model BM-T tilt Switch from BinMaster (Lincoln, NE) is a level indicator used for point level detection of heavy materials in bins, tanks, or silos, or over a conveyor belt or open pile. It is suspended vertically over a...
Products: Robotics, Automation & Control
Aerotech (Pittsburgh, PA) offers the HEX500-350HL high-load, six-degree-of-freedom hexapod for applications in sensor testing and high-force device manipulation. It is actuated with six struts that are built with preloaded bearings,...
Products: Robotics, Automation & Control
Novotechnik U.S. (Southborough, MA) introduced the RSX-7900 Series angle sensors that provide up to IP69K ingress protection and ISO13849 PL-d safety compliance in a non-contacting design. The sensors are available in six standard...
Products: Robotics, Automation & Control
Haydon Kerk Motion Solutions (Waterbury, CT) introduced the WGS Wide Guide Screw linear slide that utilizes a screw-driven carriage. Length and speed are not limited by critical screw speed, allowing high RPM, linear speed, and...
Products: Motion Control
ALM Positioners (Rock Island, IL) released the Model MHL1P 10,000-pound-capacity single-column positioner that features 68.5" vertical travel in 35 seconds; a pendant-controlled, 4-HP, column-mounted hydraulic unit for lifting and...
Products: Motion Control
The RoadRunner SoftStep R213S microstepping motor drive from Testra Corp. (Tempe, AZ) features an onboard processor that treats the input steps as small vector moves, and chains them together with 250 or 256 microsteps per regular...
Products: Aerospace
Tech-Etch, Plymouth, MA, offers EMI-shielded vents and air filters in most shapes and sizes. Nine different aluminum honeycomb vents are offered in both standard and custom configurations. Shielded fan vents are...
Products: Aerospace
Red Rapids, Richardson, TX, introduced the Model 372 FPGA-configurable dual-channel transceiver that features a dual-channel 16-bit analog-to-digital converter (ADC) and dual-channel 16-bit digital-to-analog converter...
Products: Manufacturing & Prototyping
Eplan, Monheim, Germany, introduced Syngineer, a communication and information platform that interfaces MCAD, ECAD, and PLC software directly through the mechatronic structure. It synchronizes mechanical engineering,...
Products: Manufacturing & Prototyping
Tektronix, Beaverton, OR, introduced the PA3000 1- to 4-channel AC/DC power analyzer for testing single- and multiphase, high-efficiency AC-DC and DC-AC power supplies. It features 10-milliwatt standby power measurement...
Products: Manufacturing & Prototyping
Pfeiffer Vacuum, Nashua, NH, offers the ASI 35 modular leak detection system for tracer gases helium and hydrogen in integral and localizing test procedures or a combination of both. An optional user interface can be controlled...
Products: Aerospace
Yokogawa Corporation of America, Newnan, GA, announced the WT300E series compact power meters that consists of the WT310E single-phase, WT310EH single-phase high current, WT332E two-element, and WT333E three-element models. These...
Products: Manufacturing & Prototyping
The Model 526 Precision DC Voltage/Current Source/Calibrator from Krohn-Hite Corp., Brockton, MA, is a repeatable DC voltage source and DC current source that provides NIST-traceable voltages from ±100 nVdc to...
Products: Manufacturing & Prototyping
The N1092A, N1092B, and N1092D DCA-M sampling oscilloscopes from Keysight Technologies, Santa Rosa, CA, are designed for 25/100/400 Gb/s optical test. They measure low-power, high-data-rate NRZ and PAM-4 devices and...
Products: Aerospace
OMEGA Engineering, Stamford, CT, offers the HHC200 Series portable, rugged environmental meters. Digital thermometers are offered in infrared and dual thermocouple models. Also available are light meters and...
Products: Aerospace
Stratasys, Eden Prairie, MN, introduced the J750 3D printer that produces full-color, multi-material prototypes and parts in a single 3D print without post-processing. Users can choose from more than 360,000 different color...
Articles: Materials
The Contamination and Coatings Engineering Branch at NASA’s Goddard Space Flight Center in Greenbelt, MD, provides system-level support in contamination engineering and thermal...
Articles: Aerospace
The technologies NASA develops don’t just blast off into space. They also improve our lives here on Earth. Life-saving search-and-rescue tools, implantable medical devices, advances in commercial aircraft safety,...
News: Materials
Since the 1600s, chocolatiers have been perfecting the art of the bonbon, passing down techniques for crafting a perfectly smooth, even chocolaty shell. Now a theory and a simple fabrication...
INSIDER: Aerospace
Students from the University of Illinois at Urbana-Champaign took top honors in NASA’s first Breakthrough, Innovative and Game-changing (BIG) Idea Challenge.The challenge: To...
INSIDER: Test & Measurement
NASA tested a 3D printed rocket engine turbopump with liquid methane – an ideal propellant for engines needed to power many types of spacecraft for NASA’s journey to Mars. During the full-power...
INSIDER: Test & Measurement
Researchers from Northwestern University used a light-powered 3D printer to create a terahertz lens. The imaging component is made from a novel metamaterial that exhibits properties not readily...
Top Stories
Blog: Lighting
A Stretchable OLED that Can Maintain Most of Its Luminescence
Blog: Energy
Batteries that Can Withstand the Cold
INSIDER: Energy
Advancing All-Solid-State Batteries
Blog: Power
My Opinion: We Need More Power Soon — Is Nuclear the Answer?
Quiz: Power
Blog: Data Acquisition
Webcasts
Upcoming Webinars: AR/AI
From Spreadsheets to Insights: Fast Data Analysis Without Complex...
Upcoming Webinars: Electronics & Computers
Cooling a New Generation of Aerospace and Defense Embedded...
Upcoming Webinars: Sensors/Data Acquisition
Beyond AI-Copy-Paste Engineering: Advanced AI-Integration Success...
Upcoming Webinars: Automotive
Battery Abuse Testing: Pushing to Failure
Upcoming Webinars: Communications
A FREE Two-Day Event Dedicated to Connected Mobility
Upcoming Webinars: Test & Measurement
Choosing the Right N-Port Strategy: Multiport VNAs vs. Switch...
