Stories
61
0
23730
30
Briefs: Electronics & Computers
Power demand can be managed to reduce cost.
The Ames Power Monitoring System (APMS) is a centralized system of power meters, computer hardware, and special-purpose software that collects and stores electrical...
Briefs: Electronics & Computers
A subsystem for the adaptive suppression of noise in a voice-communication system effects a high level of reduction of noise that enters the system through microphones. The subsystem...
Briefs: Electronics & Computers
Integrated arrays of microscopic solid-state batteries have been demonstrated in a continuing effort to develop microscopic sources of power and of voltage reference...
Briefs: Electronics & Computers
The figure shows one of four solid-state power amplifiers, each capable of generating an output power ≥240 mW over one of four overlapping frequency bands from 71 to 106 GHz. (The bands are...
Briefs: Materials
Treatment To Destroy Chloro-hydrocarbon Liquids in the Ground
A relatively simple chemical treatment that involves the use of emulsified iron has been found to be effective in remediating groundwater contaminated with trichloroethylene and other dense chlorohydrocarbon liquids. These liquids are members of the class of dense, non-aqueous phase...
Briefs: Materials
Process for Smoothing an Si Substrate After Etching of SiO₂
A reactive-ion etching (RIE) process for smoothing a silicon substrate has been devised. The process is especially useful for smoothing those silicon areas that have been exposed by etching a pattern of holes in a layer of silicon dioxide that covers the substrate. Applications in which...
Briefs: Materials
Flexible Composite-Material Pressure Vessel
A proposed lightweight pressure vessel would be made of a composite of high-tenacity continuous fibers and a flexible matrix material. The flexibility of this pressure vessel would render it (1) compactly stowable for transport and (2) more able to withstand impacts, relative to lightweight pressure...
Briefs: Materials
Lower-Conductivity Thermal-Barrier Coatings
Thermal-barrier coatings (TBCs) that have both initial and post-exposure thermal conductivities lower than those of yttria-stabilized zirconia TBCs have been developed. TBCs are thin ceramic layers, generally applied by plasma spraying or physical vapor deposition, that are used to insulate air-cooled...
Briefs: Photonics/Optics
Focal-plane arrays of quantum-well infrared photodetectors (QWIPs) equipped with both light-coupling diffraction gratings and metal side reflectors have been proposed, and prototypes are...
Briefs: Photonics/Optics
Metallized Capillaries as Probes for Raman Spectroscopy
A class of miniature probes has been proposed to supplant the fiber-optic probes used heretofore in some Raman and fluorescence spectroscopic systems. A probe according to the proposal would include a capillary tube coated with metal on its inside to make it reflective. A microlens would be...
Briefs: Photonics/Optics
Next-generation thermal load sensors, or combo sensors, optimize climate control and lighting in "intelligent automobiles," thereby enhancing the comfort and safety of drivers and passengers....
Briefs: Photonics/Optics
According to a proposal, basic x-ray lithography would be extended to incorporate a technique, called "inverse tomography," that would enable the fabrication of microscopic...
Briefs: Photonics/Optics
Learning algorithms for machine vision are essential for many of the applications that require inspection and guidance. These algorithms typically require some type of learning...
Briefs: Photonics/Optics
Photovoltaic arrays of the rainbow type, equipped with light-concentrator and spectral-beam-splitter optics, have been investigated in a continuing effort to develop lightweight, high-efficiency solar...
Briefs: Photonics/Optics
A method for correcting the aim of a beam-waveguide microwave antenna compensates for the beam aberration that occurs during radio tracking of a target that has a component of velocity...
Briefs: Manufacturing & Prototyping
An apparatus to catch paint overspray has been proposed. Overspray is an unavoidable parasitic component of spray that occurs because the flow of air or other gas in the spray must turn at the sprayed surface. Very small...
Briefs: Manufacturing & Prototyping
Preparation of Regular Specimens for Atom Probes
A method of preparation of specimens of non-electropolishable materials for analysis by atom probes is being developed as a superior alternative to a prior method. In comparison with the prior method, the present method involves less processing time. Also, whereas the prior method yields irregularly...
Briefs: Mechanical & Fluid Systems
A computational study has shown that by injecting drops in jets of gas having square, elliptical, triangular, or other noncircular injection cross sections, it should be possible to...
Briefs: Mechanical & Fluid Systems
The measurement of local flow angle is critical in many fluid-dynamic applications, including the aerodynamic flight testing of new aircraft and flight systems. Flight researchers at NASA Dryden...
Briefs: Motion Control
A proposed method of processing the outputs of multiple gyroscopes to increase the accuracy of rate (that is, angular- velocity) readings has been developed theoretically and...
Briefs: Information Technology
Developing Generic Software for Spacecraft Avionics
A proposed approach to the development of software for spacecraft avionics is based partly on a concept of generic software that could be tailored to satisfy requirements for specific missions. The proposed approach would stand in contrast to the conventional approach of first defining avionics...
Briefs: Information Technology
A set of special digital all-pass finite- impulse- response (FIR) filters produces phase shifts equivalent to delays that equal fractions of the sampling or clock period of a telemetry-...
Briefs: Physical Sciences
Assessment of Models of Chemically Reacting Granular Flows
A report presents an assessment of a general mathematical model of dense, chemically reacting granular flows like those in fluidized beds used to pyrolize biomass. The model incorporates submodels that have been described in several NASA Tech Briefs articles, including "Generalized...
Briefs: Physical Sciences
Numerical Study of Pyrolysis of Biomass in Fluidized Beds
A report presents a numerical-simulation study of pyrolysis of biomass in fluidized-bed reactors, performed by use of the mathematical model described in "Model of Fluidized Bed Containing Reacting Solids and Gases" (NPO-30163), which appears elsewhere in this issue of NASA Tech Briefs. The...
Briefs: Physical Sciences
The figure depicts an example of proposed compact water-quality sensors that would contain integrated arrays of ion-sensitive electrodes (ISEs). These sensors would serve as electronic...
Briefs: Physical Sciences
A mathematical model has been developed for describing the thermofluid dynamics of a dense, chemically reacting mixture of solid particles and gases. As used here, "dense"...
Briefs: Physical Sciences
A technique for the fabrication of piezoelectric actuators that generate acceptably large forces and deflections at relatively low applied voltages involves the stacking and diffusion...
Briefs: Materials
Experiments have shown that superlattices that comprise alternating epitaxial layers of dissimilar paraelectric perovskites can exhibit large changes in permittivity with the application of...
Briefs: Sensors/Data Acquisition
A relatively inexpensive instrumentation system that includes units that are connected to thermocouples and that are parts of a radio-communication network has been developed to enable monitoring of...
Top Stories
Blog: Manufacturing & Prototyping
2025 Holiday Gift Guide for Engineers: Tech, Tools, and Gadgets
Blog: Power
Using Street Lamps as EV Chargers
INSIDER: Semiconductors & ICs
Scientists Create Superconducting Semiconductor Material
Blog: Materials
This Paint Can Cool Buildings Without Energy Input
Blog: Software
Quiz: Power
Webcasts
Upcoming Webinars: AR/AI
The Real Impact of AR and AI in the Industrial Equipment Industry
Upcoming Webinars: Motion Control
Next-Generation Linear and Rotary Stages: When Ultra Precision...
Podcasts: Manufacturing & Prototyping
SAE Automotive Engineering Podcast: Additive Manufacturing
Podcasts: Defense
A New Approach to Manufacturing Machine Connectivity for the Air Force
On-Demand Webinars: Manufacturing & Prototyping
Streamlining Manufacturing with Integrated Digital Planning and Simulation

