61
26,86,87,88,96,97,99,100,101,169,197,949,950,973,1001,1007
-1
18420
30
Briefs: Software
Program for Analysis of Spacecraft Telecommunication Systems
A computer program facilitates the analysis and design of a radio-communication system for transmitting data from an orbiting spacecraft to ground stations. Input data provided by the user include primarily (1) parameters of the spacecraft orbit (including parameters that specify...
Briefs: Software
Software for Spacecraft/Ground Communication via the Internet
The Space Communications Protocol Standards (SCPS) specify a developmental system of international protocols for data communications between spacecraft and points on Earth. SCPS protocols are intended to make a spacecraft appear, to a terrestrial computer user, as just another node on...
Briefs: Materials
Improved Fabrication of YBa2Cu3O7 —x Superconductors
An improved method of manufacturing high-temperature superconductors of general composition YBa2Cu3O7— x and various grain structures has been devised. This method involves mixing, pressing, and heating of Y2O3, CuO, and Ba(NO3)2 powders. This method is easier than an older method that...
Briefs: Materials
Several materials have shown promise for coating graphite susceptors used in epitaxial growth of 4H-SiC. The development of appropriate susceptor-coating materials is an essential part of...
Briefs: Materials
Priming Ceramic Materials for Better Waterproofing
An improved process for waterproofing ceramic materials — especially lightweight ceramic insulation materials in both rigid (tile) and flexible (blanket) form — has been invented. In this process, traditional waterproofing agents are used, but before the waterproofing agents are applied, the...
Briefs: Mechanical & Fluid Systems
Hoytethers™ are failure-resistant multiline tethers named after their inventor, Robert Hoyt. They were originally intended for use in outer space to provide reliable tethering of satellites in the presence...
Briefs: Mechanical & Fluid Systems
Program Simulates Flights of Advanced Aerospace Vehicles
Marshall Aerospace Vehicle Representation in C (MAVERIC) is a C-language computer program developed for use in performing high-fidelity simulations of flights and analyses of the guidance and control performances of the X-33 aerospace vehicle and the VentureStar reusable launch vehicle (RLV)....
Briefs: Medical
A developmental noninvasive method of determining the concentration of glucose in blood is based on (1) the acquisition of a near-infrared (NIR) Raman spectrum from the aqueous humor of...
Briefs: Test & Measurement
Improved Electrical-Impedance Body-Fluids Monitor
The Johnson Space Center (JSC) body-fluids monitor advances the state of the art of measuring hydration levels in humans during spaceflight. Neither bulky nor heavy, this noninvasive instrument is built around a commercial inductance-capacitance-resistance meter, which is used to obtain...
Briefs: Test & Measurement
Software for Testing Access List Integrity
Many networks rely on firewalls or filtering routers for frontline network security. Packet filtering firewalls or routers filter incoming or outgoing packets based on a set of access rules. The IP (Internet Protocol) Packet Generator computer program assists in verifying that a packet filtering firewall...
Briefs: Information Technology
Program for Parallel Distributed Processing
A software system has been devised to manage automatically (1) the distribution of mutually independent computing tasks to computer workstations in NASA's Flight Design and Analysis System (FADS) network and (2) the execution of those tasks on those workstations. This program parallelizes serial tasks,...
Briefs: Mechanical & Fluid Systems
Spacecraft Solar-Wind Trim Panels for Pointing
A report proposes that spacecraft assigned to orbits distant from the Earth be equipped with trim panels that would intercept the solar wind to generate small torques to correct for disturbance torques and thereby help to maintain the spacecraft pointed in the required directions. Paired panels would...
Briefs: Materials
Reaction-Forming Method for Joining SiC-Based Parts
Two reports present additional details about the method described in "Reaction-Forming Method for Joining SiC-Based Ceramic Parts" (LEW-16661), NASA Tech Briefs, Vol. 23, No. 3 (March 1999), page 50. To recapitulate: A carbonaceous mixture (typically a paste) is applied to a joint between parts....
Briefs: Information Technology
A method of determining the location and the uncertainty in the location of a mobile robot to subpixel resolution on a map grid has been devised. The method is applicable to a robot...
Briefs: Mechanical & Fluid Systems
A methodology of active control has been developed in an effort to alter (preferably to reduce) the tendency of a four-wheel land vehicle to roll over during tight turns and similar...
Briefs: Mechanical & Fluid Systems
Program for Computing Dynamics of Multiple Bodies
Symbolic Generator-Based Efficient Multibody Dynamics Algorithm (SOMBAT) is a program that enables speedy and accurate computations that solve equations of motion of multiple bodies. Originally intended for space-based applications (i.e., solving equations for the dynamics of a cluster of flexible...
Briefs: Materials
TRiangular Unstructured Mesh generator by Point insEr Tion (TRUMPET) is a computer program that generates meshes that are composed of triangular cells and are bounded by complex shapes....
Briefs: Materials
A method of analyzing and designing laminated composite-material wraps for columns, arches, domes, and other large reinforced-concrete structures involves an extension of...
Briefs: Materials
Software for Predicting Life of Metal-Matrix Composites
LIPS (LIFE PREDICTION SOFTWARE) is a computer program for predicting the life of an object that is made of a unidirectional-fiber/metal-matrix composite (MMC) material and that is subjected to mechanical loading along the fiber direction. The program is derived from a theory formulated to be...
Briefs: Electronics & Computers
The figure schematically illustrates an optoelectronic security system in which binary information on the identity of a person or object is encoded in Bragg gratings in an optical...
Briefs: Electronics & Computers
The apparatus shown schematically in the figure is an optoelectronic shaft-angle encoder that measures absolute angles with high resolution. This encoder is an improved version of the...
Briefs: Electronics & Computers
High-Power Laser Illuminator
A laser illuminator system has been developed for use in automated tracking of objects. In its original application, the system illuminates a 5° conical region expected to contain a small satellite at a distance up to 750 m from the space shuttle. If the satellite comes within this region, then a receiving...
Briefs: Electronics & Computers
A communication controller circuit for a wind-tunnel model is undergoing development. The circuit is intended to serve as part of a highly miniaturized, distributed, modular electronic...
Briefs: Software
GENOA-PFA is a commercial version of the Composite Durability Structural Analysis (CODSTRAN) computer program, which simulates the progression of damage ultimately leading to fracture...
Briefs: Materials
Molecular-Sieve Type 3Å
The term "Molecular-Sieve Type 3Å" denotes a clay-based, zeolite material that revolutionizes a fluid-purification process by removing trace water and iron from nitrogen tetroxide/nitric oxide (MON-3) mixtures used as oxidizer components of spacecraft propellants. Older processes of this type removed only water or iron...
Briefs: Materials
Composite Graphite Anodes Containing Cyclic Ether Additives
Scientists have developed a type of composite graphite anode that will benefit the U.S. space program and private industry by increasing the rechargeability of lithium-ion batteries. Rechargeable lithium-ion batteries, which are used on the space shuttle and Space Station, are also used in...
Briefs: Materials
Polypyrrole and Polyaniline Doped With Lignosulfonic Acid
Experiments have shown that electrically conductive polymers with water-soluble fractions can be synthesized by polymerization of pyrrole or aniline in the presence of lignosulfonic acid, which is a polymeric acid that can be derived relatively easily from the spent sulfite liquor byproducts...
Briefs: Mechanical & Fluid Systems
A leak-free valve has been proposed as a more reliable, less expensive, adaptable alternative to a one-time-opening, pyrotechnically actuated valve (pyrovalve). In the original intended application, the pyrovalve...
Briefs: Mechanical & Fluid Systems
Pneumatic cushions have been proposed for protecting the afterbodies of two-body instrumented soil-penetrator projectiles. These cushions would be, essentially, doughnut-shaped...
Top Stories
Blog: Manufacturing & Prototyping
2025 Holiday Gift Guide for Engineers: Tech, Tools, and Gadgets
INSIDER: Research Lab
Scientists Create Superconducting Semiconductor Material
Blog: Software
Quiz: Materials
Blog: Aerospace
Tech Briefs Wrapped 2025: Top 10 Technology Stories
Blog: Manufacturing & Prototyping
Webcasts
Upcoming Webinars: AR/AI
The Real Impact of AR and AI in the Industrial Equipment Industry
Upcoming Webinars: Motion Control
Next-Generation Linear and Rotary Stages: When Ultra Precision...
Upcoming Webinars: Energy
Hydrogen Engines Are Heating Up for Heavy Duty
Podcasts: Medical
How Wearables Are Enhancing Smart Drug Delivery
Podcasts: Power
SAE Automotive Podcast: Solid-State Batteries

