Electrical/​Electronics

An Integrated Modular Avionics (IMA) architecture provides a common platform for software partitions with shared processing and input/output (I/O) resources. A key feature of the IMA architecture is I/O partitioning. An IMA system will prevent one...

Smart sensors for measuring temperature and pressure have been developed as part of the Advanced Ground Systems Maintenance (AGSM) project. The sensors have flash memory for storing firmware, calibration data, and configuration information....

An updated software model has been developed for predicting the single-event effect (SEE) rates in circuit designs as they are being designed. This tool will be used for estimating the frequency of the various SEEs, such as logic upsets and circuit latch-up. It may also be used to estimate the total...

The innovation is a technique to overcome hardware limitations of common high-speed data acquisition systems in order to be able to measure electronic signals with high dynamic range, wide bandwidth, and high frequency.

State-of-the-art GaAs Schottky diode technology, which is being used for local oscillators (LOs) in heterodyne receivers and transmitters for radar applications, has limitations in terms of power-handling capabilities. That makes it difficult to generate necessary LO power to drive multi-pixel...

This report presents the design, construction, and test results of a novel multitone, multi-band, high-frequency synthesizer for application in a space-borne (including a CubeSat) beacon transmitter for radio wave atmospheric...

Most of today’s automotive electronic systems are composed of two major mechanical elements: an equipment chassis or enclosure, and a printed circuit board (PCB) assembly. The PCB is composed of laminated copper and FR-4 glass epoxy. These systems often operate in severe...

The Arduino platform was used to develop an interface between two otherwise incompatible commercial devices in order to drive the ATHLETE (All-Terrain Hex-Limbed Extra-Terrestrial Explorer) rover over long distances. The Portable Operations Terminal consists of three distinct parts: a robot-mounted...

Many control applications require precision, high-voltage-capable stimulus current drivers for sensor excitation. In particular, a requirement for a stimulus driver that can be primarily integrated into a motor feedback signal conditioning ASIC (application...

Scandate cathodes are able to produce about 20 times the emission of conventional all-tungsten cathodes at the same temperature. Conversely, they operate at about 200 °C lower temperature for the same emission. Scandate cathodes have been studied since at least the 1960s. Between...

This innovation uses an active materials-based force-amplified mechanism and advanced piezoelectric materials for more efficient energy harvesting from mechanical shock and vibration. The harvested energy is stored in rechargeable batteries. The hybrid force/stress...

Battery health monitoring is an emerging technology field that seeks to predict the remaining useful life (RUL) of battery systems before they run out of charge. Such predictive measures require interpretation of large amounts of battery status data within a Bayesian prognostic framework.

A high-rate GMSK (Gaussian Minimum Shift Keying) modulator was developed for space operation. Currently, multi-user modems are under development, and the GMSK modulator provides a way of packing more users within a space environment, especially for Mars exploration.

A document describes a design optimization method for determining optimal shapes for vehicles with mid-range lift-to-drag ratios that are entering or re-entering planetary atmospheres. The design space includes consideration of hypersonic aerothermodynamic properties (for minimizing heating)...

This innovation is a sub-nanosecond time-interval measurement that is compact and inexpensive, implemented in a field-programmable gate array (FPGA). Currently, high-speed count ers or semi-custom or custom ASICs (application specific integrated circuits) are used for time-interval...

The Integrated Modular Avionics (IMA) architecture being developed for space applications requires that sensor data be autonomously sampled and transmitted to the system network. This transmission needs to occur on a predetermined, fixed...

A 4-channel digitizer was designed, built, and tested. The very large, complex board enables SweepSAR. The proposed Deformation, Eco-Systems, and Dynamics of Ice Radar (DESDynl-R) Lband SAR instrument employs multiple digital channels to optimize resolution...

NASA has an interest in utilizing the Ka-band frequency allocation. One of the main reasons for migrating to Kaband is the need for higher frequency bandwidth to enable higher data rates. A dual circular polarized wideband antenna for Ka-band communications applications was...