Electronics & Software

FIAT v3 simulates one-dimensional thermal energy transport through a multilayer stack of thermal protection materials, bonding materials, metallic or composite structures, air gaps, and/or insulations. The outer surface encounters aerothermal heating from hypersonic flow, and...

Originating as the Aerodynamics Division Software Library of the 1980s and -90s, this software is a collection of more than 100 software applications, many of them for manipulating the grids and flow solutions associated with computational fluid dynamics (CFD). Underlying these applications are about 30 libraries...

The Lunar Reconnaissance Orbiter (LRO) required an innovative and modular approach to the design and development of the electronics needed to control the propulsion and deployment components, as well as the electronics necessary to support safety inhibits for personnel and range requirements....

A complex organization with many tasks and sub-tasks, many phases, and many workers often will have an associated database with many users and groups, each of whom has a limited “need to know” (e.g. fine-grained security access controls) that does not extend to all information in the database. A group...

This tool supports the development of table loads required to inform the flight software of new on-the-fly packet definitions. The main outcome of the processing includes all the database products needed by the ground system to process the newly created packets. The tool ingests...

This hardware-independent, Web-based service provides the capabilities to improve software assurance by streamlining the management of the analysis tools, the code being analyzed, and the results that are generated. The service is a GUI (graphical user interface) application that addresses the needs of software developers and supporting...

Previously, the Mars Reconnaissance Orbiter (MRO) did not allow observations to go beyond the end of a planning period. However, opportunities for observing the Mars Science Laboratory (MSL) rover occur close enough to these boundaries to require the...

The Integrated Science Instrument Module (ISIM) Ground Support System (IGSS) Equation Processor (IEP) allows for the general production of “derived” telemetry products in the Raytheon Eclipse ground system used to support the James Webb Space Telescope (JWST) project. The IEP works...

Perilog measures the degree of contextual association of large numbers of term pairs in text to produce network models that capture the structure of the text and, by virtue of Perilog’s validated theory of iconicity, the structure of the domains, situations, and concerns expressed by the author of the text. Given alphanumeric...

BAT is a Web-based application used for the assembly and inspection of critical flight and associated ground support hardware for JPL missions that are developed in-house. It is used to capture and communicate data that is unique to a part or assembly that cannot be captured...

The current installation method for tall, stacked capacitors is very cumbersome because the lead form is very sharp and prone to solder cracking due to thermal cycling. An astringent installation process was developed to obtain the best chance of a successful solder joint with a proper heel fillet so the...

This invention presents a nanoscale vacuum tube or vacuum transistor fabricated entirely using current silicon integrated circuit manufacturing techniques. Vacuum is better for electron transport than any semiconductor since there is no electron scattering. In addition, vacuum devices are immune to radiation....

NASA Flywheel is an augmented reality application intended to highlight NASA Glenn’s research efforts in the area of flywheel energy storage systems. The app utilizes a printed optical target, available on the GRC Flywheel Program brochure and through the NASA Glenn Web portal, to present users with 3D views of flywheel...

The current steady-state performance-based system studies are not adequate to evaluate certain advanced technologies for the challenges associated with meeting the transient performance requirements without better definition and control of component operating margins. Additional...

When a maneuverable spacecraft confronts a potentially unsafe conjunction with another space object, its operators must decide whether to maneuver to mitigate the risk of a collision. Such decisions may not be straightforward, since the operators must balance their...

The class of 3DGRAPE codes is designed to generate volume grids using iterative methods to solve the non-linear, nonhomogeneous, elliptic partial differential heat equation with heat sources. The solution to the heat equation develops...

This software models the Delay Tolerant Link State Routing protocol. It runs inside the QualNet network simulator, and allows injecting of external bundles when running in emulation mode. It leverages QualNet’s library of networking protocols and JPL’s CCSDS models.

The EUROPA planning system is a general-purpose, reusable, artificial intelligence software system for automatically generating plans for performing complex activities in parallel, in accordance with constraints on activities and their interactions. One part of the system input...

Vendor software supplied with commercial acoustic emission equipment is incapable of performing the analysis required to characterize damage and make decisions on remaining life for NASA composite overwrapped pressure vessels (COPVs). The Acoustic Emission Analysis Applet (AEAA) software, currently...

The objective of this work was to develop a robust, cost-effective receiver with maximum dynamic range to track the frequency and power variation of a beacon signal. The result was the development of a frequency estimation algorithm that yields a more accurate...

The software for NASA’s Northstar Systems computed tomography (CT) and Picometrix Terahertz CT systems do not have the ability to unwrap and reslice cylindrical CT data to allow top-to-bottom, 2D sheet views of the data. Therefore, it is difficult to size flaws laterally...

The NASA Technology Transfer System (NTTS) is a NASA-created technology transfer workflow management system, a schema-less database management system used to track the life-cycle of NASA inventions. It is built on XDB, a NASA homegrown XML database. Because of its schema-less approach to store data, NTTS can host a cluster...

Optical communications in terrestrial and space environments require transmitted signals on the order of 40 GHz and higher, because of the uncertain and changing transmission environments. A robust communications system is needed that will provide these frequencies and substantial discrimination between...

An aircraft pilot would prefer to receive information on weather patterns, obstructions, and other conditions that may interfere with a flight plan, formal or informal, as the pilot’s flight proceeds, with a latency of no more than a few minutes. Learning of, and reacting to, a changing environment...