Materials & Coatings

A ceramic paste that can be applied relatively easily, either by itself or in combination with one or more layer(s) of high temperature ceramic fabrics, such as silicon carbide or zirconia, has been invented as a means of patching cracks or holes in the reinforced carbon-carbon forward surfaces...

A method of imparting relatively hard protective outer skins to aerogel monoliths has been developed. Even more than aerogel beads, aerogel monoliths are attractive as thermal-insulation materials, but the commercial utilization of aerogel monoliths in thermal-insulation panels has been inhibited by their...

A wet pressurized pyrolysis (wet carbonization) process has been invented as a means of producing activated carbon from a wide variety of inedible biomass consisting principally of plant wastes. The principal intended use of this activated carbon is room-temperature adsorption of pollutant gases...

Improved composite solid polymer electrolytes (CSPEs) are being developed for use in lithium-ion power cells. The matrix components of these composites, like those of some prior CSPEs, are highmolecular- weight dielectric polymers [generally based on polyethylene oxide (PEO)]. The filler...

Anodized aluminum components can be treated to make them sufficiently electrically conductive to suppress discharges of static electricity. The treatment was conceived as a means of preventing static electric discharges on exterior satin-anodized aluminum (SAA) surfaces of spacecraft without...

Several improved techniques for connecting superconducting thin films on substrates have been developed. The techniques afford some versatility for tailoring the electronic and mechanical characteristics of junctions between superconductors in experimental electronic devices. The techniques are...

A document presents a study of why materials of composition (Ag1–ySbTe2)0.05 (PbTe)0.95 [0≤y≤1] were previously reported to have values of the thermoelectric figure of merit [ZT (where Z =α2/ρκ, α is the Seebeck coefficient, ρ is electrical resistivity, κ is...

Patches consisting mostly of ceramic fabrics impregnated with partially cured polymers and ceramic particles are being developed as means of repairing ceramics and ceramic-matrix composites (CMCs) that must withstand temperatures above the melting points of refractory metal alloys. These...

Dispersions (including monodispersions) of nanotubes in water at relatively high concentrations have been formulated as prototypes of reagents for use in making fibers, films, and membranes based on single-walled carbon nanotubes (SWNTs). Other than water, the ingredients of a dispersion of this...

Silica aerogels have been shown to be attractive for use as thermal insulation materials for thermoelectric devices. It is desirable to thermally insulate the legs of thermoelectric devices to suppress lateral heat leaks that degrade thermal efficiency. Aerogels offer not only high thermal...

A paper discusses an experimental regenerable sorber for removing CO2 and trace components — principally, volatile organic compounds, halocarbons, and NH3 — from spacecraft cabin air. This regenerable sorber is a prototype of what is intended to be a lightweight alternative to...

Microsphere insulation panels (MIPs) have been developed as lightweight, long lasting replacements for the foam and vacuum-jacketed systems heretofore used for thermally insulating cryogenic vessels and transfer ducts. Whether preformed or applied in place, foam insulation deteriorates fairly rapidly: on cryogenic...