Test & Measurement

The NGXO (Next Generation X-Ray Optics) project has several problems relating to how to bond a very thin glass mirror to a metallic structure without distortion. One problem is that all epoxies shrink (at the micron level) when they cure. This shrinkage distorts the optical quality of the mirror unacceptably. Another...

The NASA Langley Research Center (LaRC) Transonic Dynamics Tunnel (TDT) has been operational since 1960, investigating a wide range of aeroelastic and non-aeroelastic phenomena. A dedicated aeroelastic test facility, the TDT is a large,...

This work was based on the need for a relatively small passive detector of maximum temperature reached by an object that can be visually inspected. The device requirements are to be hermetically sealed for contamination control, give a clear indication of maximum temperature achieved (non-reversible) with a ~10 °C...

A method was developed for effective, efficient, non-destructive, in-situ sample processing. Pressure vessels are used for sample delivery and collection, a shaker is used to keep the particles suspended, a back pressure of argon gas is used to keep the system under pressure to regulate the flow, and...

The goal of this work was to advance the development of new, extremely small (≈2 cm3), low-power (≈3 W), and low-cost micro mass spectrometer instrument systems (μMSIS) through the application of microelectro-mechanical system (MEMS) design and fabrication, and microsystem...

Theodolite autocollimation metrology continues to play an important part in spacecraft optical alignment. Spacecraft optical alignment is both art and science for using optical instruments to place or determine the orientation and envelope of critical components on...

O-phthalaldehyde (OPA) is a high-level disinfectant commonly used, for example, for sterilization of heat-sensitive medical instruments; it demonstrates effective microbicidal activity against a wide range of microorganisms (including mycobacteria, gramnegative bacteria, and spores). On the International Space...

Technology has been developed that provides a way to compute the remaining useful life (RUL) of a component or system. The estimation of the RUL of a degraded or faulty component is at the center of condition-based maintenance, and prognostics and health management. It gives operators a...

Ultrasound has been a useful tool in the detection of kidney stones. It is a low-cost solution that does not require ionizing radiation that would be harmful to vulnerable populations such as children and recurrent stone formers. However, it suffers from a broad range of sensitivity (78 to...

It is desirable to measure the electromagnetic properties of devices and materials in the millimeter part of the spectrum. For guided wave-based devices and materials (waveguides, coaxial devices), a vector network analyzer (VNA) is an excellent tool for this purpose since it provides...

This invention provides a method using light of different wavelengths to estimate freshwater and marine algae growth stage and algae growth rates as well as lipid content in standard media. Light absorption by the algae is measured for a specified light intensity in each of two or...

Development of new treatments for metabolic bone disease, and evaluation of the effectiveness of existing therapies in individual patients, are severely hampered by the lack of any reliable tool for quickly measuring changes in bone mineral balance in...

The optically modulated miniature magnetometer (OMMM) is intended to replace two separate instruments (each with their respective mass and power allotments) that are commonly needed together for scientific studies of magnetic fields — a triaxial fluxgate vector magnetometer and an optically pumped alkali...

After adhesively bonded mechanical test specimens have been tested to failure, the failure mode must be interpreted and quantified. Areas of the adherent that are bare (no residual adhesive remains) have undergone adhesive failure. The remainder of the surface has undergone...

Development of the next generation of spaceflight vehicles has prompted a renewed focus on sound source characterization and near-field propagation modeling. Without advancements in these areas, large uncertainties in vibro-acoustic loading estimates on space vehicles and payloads may result...

This concept uses an optical interferometric method to determine the density and/or pressure of the gas state contained with tank ullage. The system is similar to compression tank volume methods. By using an optical interferometric technique to determine gas density and/or pressure, a much...

The Earth’s magnetosphere offers a wealth of information on particle dynamics, acceleration, and trapping. Fast neutrons, produced in the Earth’s atmosphere by the impact of galactic cosmic rays (GCRs) and solar energetic particles (SEPs), are an important but poorly measured component of...

Given the increased availability of small satellite opportunities either through CubeSats or the Air Force’s University Nanosat program, and the limited availability of larger platforms, it is challenging to develop new instrumentation that not only fits within the envelope of small...

A variable acceleration calibration system combines an innovative mechanical system and a statistical design of experiments to calibrate multi-axis force transducers. This system can reduce calibration time, allow for improved calibration of large-scale transducers, provide mobility for on-site...

Fourier transform spectroscopy works by measuring a spectral/light signal through a Michelson interferometer. In order to know the wavelength of the signal, one must use a stable reference, which is typically a metrology laser. In a standard Fourier transform...

Concentration-driven molecular diffusion is a fundamental phenomenon essential for the transport of nutrients in cells, for oxygen exchange in the lungs, and mating of chemicals in industrial reactors and the food industry. Thus, diffusion plays a...