Test & Measurement

The typical approach for producing laser output at the 1651-nm wavelength is via nonlinear frequency conversion. Lasers based on nonlinear conversion are complex, and it is very difficult to provide stability over time and over a wide range of operating...

Molecular-based optical diagnostics techniques capable of obtaining simultaneous measurements of multiple fluid properties are critically important for characterizing hypersonic air-breathing engines, such as scramjet engines and scramjet-rocket combined cycle engines. Correlations between those...

Space missions using magnetometers have been very successful. However, science missions now require higher levels of accuracy and stability in order to refine existing understanding and improve modeling. In most space missions that require high-accuracy vector measurement of magnetic fields, a separate scalar...

Commercially available components are integrated into an assembly that can be used to measure the slosh dynamics of cryogenic liquids. The apparatus consists of a linear motion table that is properly instrumented to record high fidelity position, force, and acceleration measurements of all linear and rotation responses of...

A negative ion time projection chamber (NI-TPC) was developed that is suitable for measuring the polarization of bright transient events. The polarization of the astrophysical source is determined by imaging photoelectron tracks...

AROMA uses a boundary-element formulation to calculate normal and shear pressure distributions and sub-surface stresses for elastic bodies in contact. In addition to handling static normal and sheer loading, it also solves the contact problem for rolling elements such as bearings, traction drives, and...

This innovation is a tungsten-rhenium gauge that can be placed into an aft exit cone of a rocket motor. It will measure heat flux with time for the full duration of the RSRM (reusable solid rocket motor) nozzle environment with equal response time.

The magnetic sensitivity of a Ka-band isolator’s output phase is measured at 7 × 10–4 deg/G level. This high degree of precision is enabled by the sensitive phase measuring capabilities of a testbed built to mimic NASA’s Gravity Recovery and Interior Laboratory...

For effective range safety, global positioning system (GPS) metric tracking must be robust to interference with, and jamming of, GPS signals. The conventional approach to mitigating interference and jamming is to use a Controlled Reception Pattern Antenna (CRPA)....

In order to develop a software-only test environment for the James Webb Space Telescope (JWST) mission, a solution was needed to send commands and receive telemetry between the TCTS (Telemetry and Command Test Set) and CMM-S card. The as-is solution requires the utilization of commercial...

Insulation systems usually do not operate on their own; they must work together with a structural system that is designed to support the article being insulated. Typically this structure penetrates the insulation, degrading it in some manner, and gives a pathway for...

Human subjects are unsuitable for objective performance testing of victim detection radar because their heart and respiration rates are not controllable or repeatable. There are limitations on human targets from a safety standpoint as well. It is difficult to relate the ground truth to...

A miniature, low-power, solid-state detector for ionizing radiation was developed for use in more locations, and requiring less space and lower power than current technology. An accepted way of counting high-energy charged particles common in space radiation is to detect the light...

The accuracy of spaceborne sensors measuring reflected solar radiance can be affected by multiple factors. First, instruments with complex optics are sensitive to polarization. The response of such instruments is characterized before launch; however, sensitivity to polarization can change on orbit...

Stennis Space Center (SSC) is one of three government-operated rocket engine test facilities in the United States and is the primary center for testing and flight-certifying rocket propulsion systems for future space vehicles. Safety...

A novel automated table lookup method is developed to compute the near-fuel-optimal powered descent guidance trajectories, in real-time, for planetary soft landing. The main advantage of this algorithm is that it can be executed autonomously in...

A lightweight, robust fiber-optic system is the technology behind a new method to compute wing deflection and slope from measured strain of an aircraft. This state-of-the-art sensor system is small, easy to install, and fast, and offers the first-ever means of obtaining real-time strain...

In industrial synthetic chemistry laboratories, reactions are generally carried out using batch-mode methodologies, stepwise reactions, and purifications to generate a final product. Each step has an associated yield of both the reaction itself and of the final purification that...

The guarded flat plate insulation test cryostat (Cryostat-500) is a boil-off calorimeter comprising a flat-bottom test apparatus for measuring the absolute thermal performance of an insulation test article. Typical dimensions allow accepting test specimens 200 mm in diameter by up to 30 mm thick. The test...

Typical cryogenic tank metering systems use a series of thermocouple, RTD, or other temperature or resistive devices in a rake or array configurations. Since these operate using the thermal change between the liquid and gas fluid phases, they are limited by...

Ion chromatography is the state-of-the-art technique for anion separation and analysis on Earth, but it typically requires a large, powerful pump to operate at high pressures in order to speed up analysis time. The weight and power requirements of the pump interfere with creating an ideal...

The testing of materials that ablate as a design function requires detailed time history of the ablation process. The rate at which the surface recedes during testing is a critically important measure of the performance of thermal protection system (TPS) materials like heat shields for aerospace vehicles....

The complexity of spaceflight design requires reliable, fault-tolerant equipment capable of providing real-time dosimetry during a mission, which is not feasible with existing thermoluminescent dosimeter (TLD) technology. Real-time monitoring is important for...