Stories
34,35
0
420
30
Articles: RF & Microwave Electronics
Organizations in both the public and private sectors are currently racing to launch large numbers of satellites into low-Earth orbit (LEO).
Briefs: Medical
Combining high-speed camera and interferometer technology enables the detection of electrical pulses travelling through nerve cells.
Blog: Manufacturing & Prototyping
Gift giving always induces anxiety. It’s never easy to pick a present that someone will enjoy, especially if the recipient is an engineer.
Briefs: Imaging
The assembly can simply be mounted in front of a camera to enable focusing schlieren imaging capability.
Briefs: Imaging
The imaging system tested in NASA wind tunnels can reduce or eliminate shadows that occur when using many existing BOS and photogrammetric measurement systems.
Briefs: Imaging
Traditional time-of-flight LiDAR has many drawbacks that make it difficult to use in many 3D vision applications.
Briefs: Aerospace
Concept Development for Advanced Spaceborne Synthetic Aperture Radar
Spaceborne Synthetic Aperture Radar (SAR) can globally monitor dynamic processes on the Earth’s Surface. The last SAR to be developed and deployed by NASA was in the year 2000.
Briefs: Imaging
Researchers at University of Central Florida have developed an artificial intelligence device that mimics the retina of the eye.
Application Briefs: Photonics/Optics
"Early detection of a NEO headed for Earth would give us sufficient time to deflect the threat."
INSIDER: Imaging
Until recently, it was widely believed among physicists that it was impossible to compress light below the so-called diffraction limit, except when using metal nanoparticles, which...
INSIDER: Photonics/Optics
An interdisciplinary team from Hokkaido University’s Engineering and Agriculture departments and the Institute for Chemical Reaction Design and Discovery (WPI-ICReDD) has developed...
INSIDER: Imaging
Extreme miniaturization of infrared (IR) detectors is critical for their integration into next-generation consumer electronics, wearables and ultra-small satellites. Thus far, however, IR detectors have...
INSIDER: Imaging
See the new products, including a green laser, a ToF camera, an AI-capable microprocessors, and more.
NASA Spinoff: Aerospace
Inspired by NASA’s research of certain segments of DNA to estimate radiation damage, Promega Corp. used the technique to create its own diagnostic test which is used to customize cancer treatment.
Special Reports: Aerospace
Additive Manufacturing - November 2022
AM/3D Printing is fundamentally changing how products are prototyped and produced in aerospace, medical, electronics, and many other fields. To help you keep pace with the latest advances, we present this...Special Reports: Robotics, Automation & Control
Medical Robotics - November 2022
"Millirobots" swimming in your bloodstream...soft robots you can print on demand...cobots hard at work in the test lab. Read about these and other innovative technologies in this compendium of recent articles...Special Reports: Test & Measurement
Automotive Test & Simulation - November 2022
In this compendium of articles from the editors of Automotive Engineering magazine, learn about the latest simulation and test technologies for ADAS, EV batteries, NVH, vehicle cybersecurity, and...Products: Manufacturing & Prototyping
New products on the market in November 2022, including automotive relay, power inductors, RFID Read/Write modules, and more.
Briefs: Manufacturing & Prototyping
Compact, Temperature-Tuned OFDR Laser
NASA has focused on OFDR, an alternative FBG interrogation technique based on laser interferometry.
Briefs: Energy
Inducing TR in a battery cell allows engineers to test and improve the safety performance of overheated batteries that can potentially catch fire or explode.
Articles: Imaging
The Teledyne e2v Optimom 2M combines the latest innovations in imaging and optics into one turnkey imaging solution by mounting a proprietary image sensor onto a board with a fixed lens and optional Multi Focus lens technology.
Articles: Manufacturing & Prototyping
Despite additive manufacturing's popularity, there are still several technological barriers that must be addressed to understand the process.
Products: Photonics/Optics
The new products for November 2022, including an AI inspection system, a non-contact machine vision measuring system, and more.
Briefs: Medical
The new microscope is called a hybrid open-top light-sheet (OTLS) microscope.
Application Briefs: Photonics/Optics
DiaMonTech used the Ophir Pyrocam to measure and characterize all their laser developments.
Application Briefs: Sensors/Data Acquisition
As space-based digital camera imagery is evolving, more and more advanced imaging technologies are being deployed in space to see more of the “unseen.”
Briefs: Design
Using state-of-the-art indium phosphide transistors and a basic computer and mirrors, researchers were able to produce images of concealed bodies.
Articles: Imaging
From space propulsion to underwater monitoring and antibacterial coatings, three new innovations aim to address real-world problems.
Special Reports: Imaging
Machine Vision & Camera Technology - October 2022
In this report just released by the editors of Tech Briefs and Photonics & Imaging Technology, you'll read about the world's fastest camera (.5 trillion frames per second!); an innovative...Top Stories
Blog: Manufacturing & Prototyping
2025 Holiday Gift Guide for Engineers: Tech, Tools, and Gadgets
INSIDER: Research Lab
Scientists Create Superconducting Semiconductor Material
Blog: Software
Quiz: Materials
Blog: Aerospace
Tech Briefs Wrapped 2025: Top 10 Technology Stories
Blog: Manufacturing & Prototyping
Webcasts
Upcoming Webinars: AR/AI
The Real Impact of AR and AI in the Industrial Equipment Industry
Upcoming Webinars: Motion Control
Next-Generation Linear and Rotary Stages: When Ultra Precision...
Upcoming Webinars: Energy
Hydrogen Engines Are Heating Up for Heavy Duty
Podcasts: Medical
How Wearables Are Enhancing Smart Drug Delivery
Podcasts: Power
SAE Automotive Podcast: Solid-State Batteries
Podcasts: Power
