Beyond Earth: The Future of In-Space Servicing

It no longer requires the imagination of Arthur C. Clarke to see where the space industry is headed. We need only to look at every other system of vehicles, appreciate the falling technical roadblocks, and observe the regulations and resources environment. It is with confidence that we ask not, “if?” but, “when?” We invite you to consider, “what’s next?” because almost anything becomes possible with the right foundations in place.

In-Space Manufacturing of Self-Replicating Machines

How do we get to a future of self-replicating, Von Neumann space probes? What are some of the steps required to convert the Asteroid Belt into a partial Dyson Sphere? The answer lies in ISAM or in-space servicing assembly and manufacturing, 3D printing on-orbit, and fully automated, ‘lights-out’ production on-Earth.

Advancing Technologies for In-Space Servicing, Assembly, and Manufacturing

Greg Richardson leads COSMIC as the Executive Director of the consortium and primary interface to NASA. He is also a principal engineer/scientist in the Human Exploration and Space-flight Division at The Aerospace Corporation. In this interview, he elaborates on the future vision of COSMIC and how the organization will coordinate work to help accelerate ISAM activities that will foster the future space economy.

The Rise of the Celestial Assembly Line

The concept of space factories holds immense potential to revolutionize space exploration and benefit humanity on Earth. By leveraging advancements in 3D printing, robotics, and automation, these celestial assembly lines will pave the way for a more sustainable and cost-effective space economy.

Videos of the Month

See the videos of the month, including one on NASA’s Europa Clipper spacecraft; one on the Dragonfly rotorcraft and how it was tested multiple times by Johns Hopkins Applied Physics Laboratory in wind tunnel facilities; one on a team from Los Alamos National Laboratory going to the Haughton Impact Crater on Devon Island, Canada — a frigid environment similar to Mars; and one on engineers at the U.S. Naval Research Laboratory’s Naval Center for Space Technology recently completing robotic payload component level testing.

The Heat Is on Data Storage — Which Is Now OK

A University of Pennsylvania team demonstrated memory technology capable of enduring temperatures as high as 600 °C — more than twice the tolerance of any commercial drives on the market — and these characteristics were maintained for more than 60 hours.

How Much Do You Know About Unmanned Underwater Vehicles?

How much do you know about unmanned underwater vehicles (UUVs)? Test your knowledge with this quiz.

Imperceptible Sensors Printed Directly on Human Skin

Researchers have developed a method to make adaptive and eco-friendly sensors that can be directly and imperceptibly printed onto a wide range of biological surfaces.

3D-Printed Mini-Actuators Can Move Small Soft Robots, Lock Them Into New Shapes

Researchers from North Carolina State University have demonstrated miniature soft hydraulic actuators that can be used to control the deformation and motion of...

Scientists Create Soft Robots Mimicking Human Skin to Provide Medical Treatment

Scientists have created innovative soft robots equipped with electronic skins and artificial muscles, allowing them to sense their surroundings and adapt their...

Molecular Crystal Motors Move Like Microbes When Exposed to Light

At first glance, Rabih O. Al-Kaysi’s molecular motors look like the microscopic worms you’d see in a drop of pond water. But these wriggling ribbons are not alive;...

Robotic Device Restores Wavelike Muscular Function in the Body

The soft-robotic prototype, driven by strong magnets controlled by a wearable external actuator, can aid patients suffering from blockages caused by tumors or those requiring stents.

Why the Hybrid Approach Extends the Range of Electric Aircraft

Jean-Christophe Lambert, Ascendance Co-founder and CEO, joins the Aerospace & Defense Technology podcast to explain why the hybrid approach is essential to near-term development of electric aircraft.

How Much Do You Know About Programmable DC Power Supplies?

Programmable DC power supplies have many more uses than those that are just controlled manually. The output levels can be remotely programmed to meet system and application requirements, for example in performing equipment testing. How much do you know about programmable power supplies? Take this quiz to find out.

My Opinion: Energy Storage, Part 2

My opinion: I take a look at some cases where it makes sense to use non-battery methods to store energy.

Creating Synthetic Cell Images for Enhanced Microscopy Analysis

The images that come out of this model are ready to be used to train segmentation models. In a sense, it’s doing microscopy without a microscope.

How Helios Horizon Is Taking Electric Aircraft to New Altitudes

Miguel Iturmendi, Helios Horizon Founder and Chief Test Pilot, explains the project's goal of flying an all-electric aircraft to the stratosphere.

How Much Do You Know About Fiber Optics?

The science of transmitting data, voice, and images by the passage of light through thin, transparent fibers, fiber optics play a pivotal role in our daily lives. How much do you know about fiber optics? Find out with this quiz.

Developing Next-Gen Solar Cells

Meet perovskite. The synthetic semiconducting material has the potential to convert substantially more solar power than silicon at a lower production cost.

Recreating ‘Star Trek’ Virtual Environments

A system for generating interactive 3D environments, Holodeck generates a virtually limitless range of indoor environments, using AI to interpret users’ requests.

3 eVTOL Companies to Watch in 2024: Archer Aviation, Joby Aviation, and Lilium

Archer Aviation, Joby Aviation, and Lilium are three electric vertical takeoff and landing (eVTOL) aircraft manufacturers that are making major progress in this growing new area of aviation right now. In this episode of the Aerospace & Defense Technology podcast, we highlight some of the latest business agreements, international expansion and regulatory progress being made by these three eVTOL companies. Listen now.

How Much Do You Know About Integrated Building Systems?

Office buildings use a significant portion of the world’s energy resources. Integrated building systems such as HVAC and lighting can significantly reduce that load. How much do you know about integrated building systems? Test your knowledge with this quiz.

A Soft Robot that Crawls like a Caterpillar

Researchers merged origami and modern materials science to create a soft robot that bends and twists through mazes with ease.

Adding Abundant Elements to Improve Li-ion Battery Cathodes

Researchers used X-ray absorption analysis and theoretical calculations to explore the fine details of changes in the structure of the cathode material caused by introducing different dopant elements.

Researchers Demonstrate Cutting-Edge Chip Technology for Ultra-Low Power AI Connected Devices

Researchers from NUS, together with industry partners Soitec and NXP Semiconductors, have demonstrated a new class of silicon systems that...