Materials & Manufacturing

A document presents a study of why materials of composition (Ag1–ySbTe2)0.05 (PbTe)0.95 [0≤y≤1] were previously reported to have values of the thermoelectric figure of merit [ZT (where Z =α2/ρκ, α is the Seebeck coefficient, ρ is electrical resistivity, κ is...

Patches consisting mostly of ceramic fabrics impregnated with partially cured polymers and ceramic particles are being developed as means of repairing ceramics and ceramic-matrix composites (CMCs) that must withstand temperatures above the melting points of refractory metal alloys. These...

An extrusion batch process for manufacturing regularly shaped sol-gel pellets has been devised as an improved alternative to a spray process that yields irregularly shaped pellets. The aspect ratio of regularly shaped pellets can be controlled more easily, while regularly shaped pellets pack more...

Dispersions (including monodispersions) of nanotubes in water at relatively high concentrations have been formulated as prototypes of reagents for use in making fibers, films, and membranes based on single-walled carbon nanotubes (SWNTs). Other than water, the ingredients of a dispersion of this...

Silica aerogels have been shown to be attractive for use as thermal insulation materials for thermoelectric devices. It is desirable to thermally insulate the legs of thermoelectric devices to suppress lateral heat leaks that degrade thermal efficiency. Aerogels offer not only high thermal...

A paper discusses an experimental regenerable sorber for removing CO2 and trace components — principally, volatile organic compounds, halocarbons, and NH3 — from spacecraft cabin air. This regenerable sorber is a prototype of what is intended to be a lightweight alternative to...

Microsphere insulation panels (MIPs) have been developed as lightweight, long lasting replacements for the foam and vacuum-jacketed systems heretofore used for thermally insulating cryogenic vessels and transfer ducts. Whether preformed or applied in place, foam insulation deteriorates fairly rapidly: on cryogenic...

ASelf-propagating high-temperature combustion synthesis (SHS) is the basis of a method of making components of porous tricalcium phosphate [Ca3(PO4)2] and related compounds in net sizes and shapes for use as surgical implants that are compatible with bone. Ca3(PO4)2-based materials...

The space shuttle orbiter's reaction control system (RCS) is a series of small thrusters that use hypergolic fuels to orient the orbiter in space. The RCS thrusters are constructed from a special niobium-based alloy — the C-103. This alloy retains excellent mechanical...

A simplified technique has been devised for fabricating helical antennas for use in experiments on radio-frequency generation and acceleration of plasmas. These antennas are typically made of copper (for electrical conductivity) and must have a specific helical shape and precise diameter.