High-Performance Electrification Solutions Reshaping Military Systems

The electrification of military systems is a positive step that will deliver enormous technical, operational, and sustainability advantages across defense equipment lifecycles. But it requires deep system-level technical expertise to ensure systems work seamlessly together across power conversion, distribution, and conditioning. Read on to learn more.

2025 Award Finalists

In this article, you’ll learn about the Create the Future Design Contest finalists in all seven categories chosen from over 600 new product ideas submitted from 67 countries.

Making Diesel Engines Nearly Emission-Free

The team spent seven years developing NOxZero™ — a highly efficient, low-cost, and easy-to-install technology that reduces diesel NOx emissions to near-zero levels. In the standard Diesel system, urea — also known as Diesel Exhaust Fluid (DEF) or AdBlue — is injected into the diesel exhaust stream. Read on to learn more about the 2025 Create the Future Contest's Automotive & Transportation finalist.

Ultra-Efficient Hydrogen Combustion for Clean, Distributed Power and Propulsion

REV Force, a radically new hydrogen-compatible engine platform developed by Alpha-Otto Technologies, combines a patented mode of engine operation with an advanced combustion strategy to redefine what’s possible in clean, distributed power. Read on to learn more about the Energy, Power & Propulsion Finalist from the 2025 Create the Future Contest.

Silent Sentry: A Software-Defined Passive Sensor for Counter-Stealth and Battlefield Survivability

Silent Sentry is a software system that transforms existing passive microwave sensors into advanced threat detectors. The system is based on Passive Microwave Radiometry (PMR), which “listens” for the faint, naturally emitted thermal radiation from all objects. Read on to learn more about Silent Sentry, which was the Aerospace & Defense finalist at the 2025 Create the Future Design contest.

100x Audio Digital-to-Analog Performance Improvement

Multi-Path is a new audio digital-to-analog conversion (DAC) architecture that improves today’s best DAC performance by 100X (40dB) or more. Noise, linearity, and dynamic range are so advanced that today’s finest test equipment cannot fully measure it (40nVrms broadband noise floor). Read on to learn more about the 2025 Create the Future Design Contest Electronics finalist.

REACT®: Automated Capsule Recycling Technology for a Circular Coffee Industry

The REACT® Coffee Maker is an innovative integrated appliance that automates both the brewing and clean recycling of single-use coffee capsules. Unlike conventional capsule coffee machines, which leave used capsules contaminated with organic coffee grounds, the REACT® Coffee Maker incorporates a patented mechanical separation module that automatically empties each capsule immediately after brewing. Read on to learn more about the 2025 Create the Future Design Contest Manufacturing & Materials finalist.

Woodpeckr

A team at the University of Waterloo has developed Woodpeckr — a semi-autonomous robot designed to climb and drill wooden utility poles during the electrical line installation process. Read on to learn more about Woodpeckr, which was the Robotics & Automation finalist at the 2025 Create the Future Design contest.

Blood Viscosity: The Next Vital Sign – A Wearable Breakthrough in Trauma, Sepsis, and Vascular Health

The first real-time, wearable blood viscosity monitoring device fills a long-standing void in trauma, burn, and sepsis care by delivering continuous, noninvasive insights into the body’s fluid and vascular dynamics. Read on to learn more about the technology, which was the Medical finalist at the 2025 Create the Future Design contest.

Lighter and More Flexible Solar Cells Achieve the Highest Efficiency

The Korea Institute of Energy Research has successfully developed ultra-lightweight flexible perovskite/ CIGS (copper indium gallium selenide) tandem solar cells and achieved a power conversion efficiency of 23.64 percent, which is the world’s highest efficiency for flexible perovskite/CIGS tandem solar cells reported to date. Read on to learn more.

New Triple-Junction Tandem Solar Cells with Increased Power Efficiency

Researchers from the National University of Singapore have developed a novel triple-junction perovskite/Si tandem solar cell that can achieve a certified world-record power conversion efficiency of 27.1 percent across a solar energy absorption area of 1 sq cm, representing the best-performing triple-junction perovskite/Si tandem solar cell thus far. Read on to learn more.

Flexible Metal-Free Magnetic Gel for Soft Robotics

Soft robots, medical devices and implants, and next-generation drug delivery methods could soon be guided with magnetism — thanks to a metal-free magnetic gel developed by researchers at the University of Michigan and the Max Planck Institute for Intelligent Systems in Stuttgart, Germany. Read on to learn more about it.

Printable Heat Shield Formulations Advance Spacecraft Construction

Innovators at NASA Johnson Space Center have developed additively manufactured thermal protection system (AMTPS) comprised of two printable heat shield material formulations. This technology could significantly decrease heat shield or thermal protection system (TPS) fabrication cost and time. Read on to learn more.

Nanofibers Yield Stronger, Tougher Carbon Fiber Composites

Researchers at the U.S. Department of Energy (DOE)’s Oak Ridge National Laboratory (ORNL) have developed an innovative new technique using carbon nanofibers to enhance binding in carbon fiber and other fiber-reinforced polymer composites — an advance likely to improve structural materials for automobiles, airplanes and other applications that require lightweight and strong materials.

An Innovative Approach to Lower Limb Rehab Robotics

A study conducted by Fuyang Yu and his colleagues introduces an innovative approach to lower limb rehabilitation. Their research outlines the development of a lower limb rehabilitation robot designed to significantly improve the safety and effectiveness of gait training through a novel method based on human-robot interaction force measurement. Read on to learn more.

Upper Body Robotic Exoskeleton

This lightweight, portable garment is designed for active shoulder and elbow positioning.

Robotic Eyes Mimic Human Vision for Superfast Response to Extreme Lighting

Researchers at Fuzhou University in China created a machine vision sensor that uses quantum dots to adapt to extreme changes in light far faster than the human eye can — in about 40 seconds — by mimicking eyes’ key behaviors. Their results could be a game changer for robotic vision and autonomous vehicle safety. Read on to learn more.

How AI Can Find the Next Groundbreaking Polymer

Finding the next groundbreaking polymer is always a challenge, but now Georgia Tech researchers are using artificial intelligence (AI) to shape and transform the future of the field. Read on to learn more.

Context-Based Configuration Management System

NASA has developed a new technology to track the status of, and changes to, enterprise level programmatic operations. Read on to learn more about it.

New on the Market

See what's new on the market, including Boker’s stamped metal components custom manufactured to fit into developed mold designs; the CRH03 tactical-grade gyroscope from Silicon Sensing Systems; Keysight Technologies' enhanced physical layer compliance test solution for high-definition multimedia interface; and more.

Products of Tomorrow

See the products of tomorrow, including an artificial neuron made of conductive plastics that can perform advanced functions similar to those of biological nerve cells; a new method that significantly boosts the performance and stability of solar cells; and more.

Product of the Month

See the product of the month: Optical Gaging Products' addition to their SmartScope® 3D Multisensor Metrology systems: SmartScope M130.

Using Streetlamps as EV Chargers

Electric vehicles (EVs) can have lower fuel costs and reduce emissions relative to cars that use gasoline, but they are only a practical option if drivers have convenient ways to charge them. For people who...

Breaking the Thermal Conductivity Barrier with Boron Arsenide

University of Houston researchers have made a groundbreaking discovery in thermal conductivity, overturning an existing theory that boron arsenide (BAs) couldn’t compete with...

Powerful and Precise Multi-color Lasers Now Fit on a Single Chip

A few years ago, researchers in Michal Lipson’s Columbia Engineering lab noticed something remarkable. They were working on a project to design high-power chips that could...

Solving Space, Power Challenges with PoE-Enabled Panel PCs

Semiconductor manufacturers are turning to panel PCs — integrated computing solutions built for demanding production environments.

5Ws of Dex: A Mobile Humanoid Robot

Richtech Robotics’ Dex is an industrial humanoid robot that learns in simulation and works in reality to elevate productivity and safety on the factory floor.

Machine Learning Leads to Stronger 3D-Printed Alloy

MIT engineers have developed a printable aluminum alloy that can withstand high temperatures and is five times stronger than traditionally manufactured aluminum.

Cutting-Edge Computing Goes Spaceborne

Hewlett Packard Enterprise worked with Ames Research Center to send a computer to space that was radiation-hardened with software. Now the approach is making fast, low-cost radiation hardening available to commercial space companies, allowing the use of cutting-edge computers in space.

How Much Do You Know About the History of 3D Printing?

It seems like there are new applications for 3D printing every day. How much do you know about its history?

Robotic Skin Allows Tiny Robots to Navigate Complex, Fragile Environments

Researchers have developed a soft robotic skin that enables vine robots a few millimeters wide to navigate convoluted paths and fragile environments. To accomplish...

Autonomous Drones Harness Wind for ISR and Counter UAS

Rob Creighton, Windlift Founder & CEO, is the guest on this episode of the Aerospace & Defense Technology podcast to explain how Windlift's autonomous tethered drone system leverages wind to power a wide variety of defense applications.

Using Generative AI to create Realistic Virtual Training Environments for Robots

Chatbots like ChatGPT and Claude have experienced a meteoric rise in usage over the past three years because they can help you with a wide range of tasks....

Berkeley Alums Develop At-Home Robotic Rehabilitation Device

Berkeley alumni Todd Roberts (MEng’20 ME) and Owen Kent (B.A.’17 Film) have shown how an idea can turn into a product that makes a difference. The pair first developed Reflex,...

A New Way to Build Soft Robots That Can Walk on Water

Imagine a tiny robot, no bigger than a leaf, gliding across a pond’s surface like a water strider. One day, devices like this could track pollutants, collect water samples or scout...

Showcasing Tomorrow’s Breakthroughs: Innovations at the 2025 Create the Future Design Contest

The 23rd annual Create the Future Design Contest was held November 7 in New York City. Read on to find out who took home the $25,000 grand prize!

Automation, Robotics, and AI Integration in Medical Manufacturing

AI-driven quality control, predictive maintenance, and process optimization are improving efficiency and reducing costs in medical manufacturing.

An AI-Powered Wearable Device to Expedite Wound Healing

A wearable device, a-Heal, designed at the University of California, Santa Cruz, aims to expedite the entire healing process. It uses a tiny camera and AI to detect the stage of healing and deliver treatment in the form of medication or an electric field.

How Forterra Is Enabling Modular Military Vehicle Autonomy

On this episode of the Aerospace & Defense Technology podcast, Patrick Acox, Forterra Vice President of Defense Growth, is the guest to explain how the company provides autonomy-enabling modules for a wide variety of military applications.

Material Science Innovations for Medical Devices

New materials are enabling the production of medical devices that are stronger, more flexible, and more sustainable.

Open-Source Software for 3D Printing with Multiple Materials

Charles Wade, a fourth-year Ph.D. student in the Matter Assembly Computation Lab (MACLab) at the University of Colorado, Boulder, and Professor Rob MacCurdy, who leads the MACLab, have created a design package that uses functions and code to map not just shapes but where different materials belong in a 3D object.

NASA Mission to Test Organic Electro-Optic Materials in Space

NLM Photonics has confirmed that its patented silicon organic hybrid (SOH) photonic chips, featuring Selerion-HTX™ and JRD1, have successfully arrived at the International...

Researchers Discover Breakthrough Materials to Enhance Light-Based Computers

Researchers have been developing computers that deploy light, or photons, rather than electricity to power storage and calculations. These light-based computers...

Test Your Knowledge About EV Motors

Electric motors are not new. They’re actually quite old. But that doesn’t mean all of their secrets have been revealed. Engineers today are still improving on an idea that has been around for almost … well, that’s the first question. How much do you know about EV motors? Find out with this quiz.

The Hidden Heroes of Hydrogen Flight: Sealing and Materials

In this sponsored episode of the Aerospace & Defense Technology podcast, Margaux Ningre-Coirier, Aerospace Sales and Market Development Manager at Omniseal Solutions, is the guest to analyze how advanced sealing solutions are becoming the hidden enablers of safe, efficient hydrogen-powered advanced air mobility (AAM). Listen now!

Ultra-Lightweight, Multispectral, High-Resolution Imaging for Orbital Intelligence and Civilian Missions

The launch of Elbit Systems' JUPITER space camera marks an important advancement in spaceborne imaging technology.

My Opinion: The Upsides Vs. the Downsides of Artificial Intelligence

It's crucial at this point in time to think about the direction of AI development. If it's not done right, there will be serious global consequences.

Personalized Medicine and Drug Delivery

First Ascent’s platform enables pharmaceutical partners to test drug candidates against live cancer cells.

The Agility Equation: Discovering the Math of Human Movement for Robotics and Footwear

Researchers from UMass Amherst are working to define the primary mathematical components of running. Compared to walking, much less is understood about...

‘Metabots’ Shapeshift from Flat Sheets into Hundreds of Structures

Researchers have created a class of robots made from thin sheets of material that can snap into hundreds of stable shapes — allowing them to execute a wide variety of...

Space Robotics at the Edge of the Unknown

The USC Department of Astronautical Engineering (ASTE) is expanding its focus on space robotics, with an emphasis on autonomous systems that can operate in extreme and unmapped environments....

Knitting Machine Makes Solid 3D Objects

A new prototype of a knitting machine creates solid, knitted shapes, adding stitches in any direction — forward, backward, and diagonal — so users can construct a wide variety of shapes and add...

How Much Do You Know About Space Optical Communications?

How much do you know about optical and laser communications in space? Test your knowledge with this quiz.

A New Additive Manufacturing Accelerator for the U.S. Navy in Guam

On this episode of the Aerospace & Defense Technology podcast we examine the technical and strategic foundations behind Guam’s new advanced manufacturing hub. Neal Orringer of ASTRO America and Alex Benham of GAMMA are the guests to discuss the facility’s additive manufacturing capabilities, supply-chain objectives, and workforce development plans. Listen now!

This Self-Powered Device Can Detect Toxic Amines in Water

Researchers have built a self-powered device that detects toxic amines in water using electrochemiluminescence (ECL).

Smarter Pathways for Precision Drug Delivery in Cancer Care

Targeted intra-arterial delivery platforms bathe cancer directly in therapy while limiting systemic toxicity.

Vote for Tech Briefs’ 30th Annual Readers’ Choice Awards

Each month, our editors choose a Product of the Month that has exceptional technical merit and practical value for our design engineering readers. Those 11 products are the nominees for the 2025 Tech Briefs' Readers’ Choice Product of the Year. You’re invited to cast your vote for the one product among the 11 listed in this article that you feel was the most important new product introduced to the engineering community in 2025.

This Paint Can Cool Buildings Without Energy Input

Researchers at the University of Sydney and start-up Dewpoint Innovations have developed a nanoengineered polymer paint-like coating that can passively cool buildings and capture water directly from the air — all without energy input.

How Virtual Twins are Reshaping Aerospace Design and Manufacturing

On the latest episode of the Aerospace & Defense Technology podcast, we sit down with two experts from Dassault Systèmes: Mariah Otte, Aerospace & Defense Solution Architect, and Jason Roberson, Industry Value Expert. Listen now!