Stories
61
0
0
0
Briefs: Mechanical & Fluid Systems
Linear back-drive differentials have been proposed as alternatives to conventional gear differentials for applications in which there is only limited rotational motion (e.g., oscillation). The finite nature of...
Briefs: Mechanical & Fluid Systems
An eight-pole radial magnetic bearing has been modified into a switched-reluctance electric motor capable of operating at a speed as high as 8,000 rpm at a temperature as high as 1,000 °F...
Briefs: Information Technology
A strategy for autonomous navigation of a robotic vehicle across hazardous terrain involves the use of a measure of traversability of terrain within a fuzzy-logic conceptual framework....
Briefs: Photonics/Optics
Efforts are under way to develop a special class of thin-shell curved mirrors for high-resolution imaging in visible and infrared light in a variety of terrestrial or extraterrestrial...
Briefs: Medical
Sports-related injuries are a common cause of damaged ligaments and tendons in shoulders, knees, wrists, elbows and ankles, and can usually be repaired through arthroscopic surgery. Through an...
Briefs: Medical
A laboratory method has been devised to enable measurement of the concentration of iron bound in ferritin from small samples of blood (serum). Derived partly from a prior method that depends...
Briefs: Physical Sciences
Subsonic and Supersonic Effects in Bose-Einstein Condensate
A paper presents a theoretical investigation of subsonic and supersonic effects in a Bose-Einstein condensate (BEC). The BEC is represented by a time-dependent, nonlinear Schroedinger equation that includes terms for an external confining potential term and a weak interatomic repulsive...
Briefs: Physical Sciences
A recent addition to the growing class of microelectromechanical systems (MEMS) is a single stage of a Knudsen compressor. This device was fabricated and tested to demonstrate the feasibility of Knudsen...
Briefs: Physical Sciences
Compact Instruments Measure Helium-Leak Rates
Compact, lightweight instruments have been developed for measuring small flows of helium and/or detecting helium leaks in solenoid valves when the valves are nominally closed. These instruments do not impede the flows when the valves are nominally open. They can be integrated into newly fabricated...
Briefs: Physical Sciences
Improved Measurement of Coherence in Presence of Instrument Noise
A method for correcting measured coherence spectra for the effect of incoherent instrument noise has been developed and demonstrated. Coherence measurements are widely used in engineering and science to determine the extent to which two signals are alike. The signals may come from...
Briefs: Physical Sciences
A pseudo-Brewster- angle infrared radiometer has been proposed for use in noncontact measurement of the surface temperature of a large body of water (e.g., a lake or ocean). This radiometer could be...
Briefs: Materials
Process for Encapsulating Protein Crystals
A process for growing protein crystals encapsulated within membranes has been invented. This process begins with the encapsulation of a nearly saturated aqueous protein solution inside semipermeable membranes to form microcapsules. The encapsulation is effected by use of special formulations of a dissolved...
Briefs: Energy
Mixed Conducting Electrodes for Better AMTEC Cells
Electrode materials that exhibit mixed conductivity (that is, both electronic and ionic conductivity) have been investigated in a continuing effort to improve the performance of the alkali metal thermal-to-electric converter (AMTEC). These electrode materials are intended primarily for use on the...
Briefs: Electronics & Computers
Arrays of electrodes integrated with chip-scale packages and silicon-based integrated circuits have been proposed for use as medical electronic implants, including neuro-prosthetic...
Briefs: Mechanical & Fluid Systems
Using ERF Devices To Control Deployments of Space Structures
A report proposes devices containing electrorheological fluids (ERFs) damper for controlling deployments of lightweight, flexible structures in outer space. The structures would include spring members that could be wound or compressed for compact stowage during transport. The ERF based...
Briefs: Electronics & Computers
The term "common/dependent pressure vessel" (C/DPV) denotes a proposed alternative configuration for a nickel-hydrogen battery. The C/DPV configuration is so named because it...
Briefs: Electronics & Computers
Capacitors capable of storing energy at high densities are being developed for use in pulse-power circuits in such diverse systems as defibrillators, particle-beam accelerators, microwave sources, and weapons....
Briefs: Electronics & Computers
Eroding potentiometers have been devised for measuring the time-dependent positions of char fronts advancing through layers of insulating material subject to intense heating from one side. In the original application, the...
Briefs: Software
Software for Replicating Data Between X.500 and LDAP Directories
X500/LDAP Directory Replication Utility is a computer program for replicating information between X.500 and LDAP directories. [X.500 is an international standard for on-line directory services. LDAP (Lightweight Directory Access Protocol) is a simple directory access protocol.] The...
Briefs: Software
LabVIEW Serial Driver Software for an Electronic Load
A LabVIEW-language computer program enables monitoring and control of a Transistor Devices, Inc., Dynaload WCL232 (or equivalent) electronic load via an RS- 232 serial communication link between the electronic load and a remote personal computer. (The electronic load can operate at constant...
Briefs: Software
The Technical Work Plan Tracking Tool
The Technical Work Plan Tracking Tool is a web-based application that enables interactive communication and approval of contract requirements that pertain to the administration of the Science, Engineering, Analysis, and Test (SEAT) contract at Johnson Space Center. The implementation of the application has (1)...
Briefs: Photonics/Optics
Two monolithic microwave integrated circuits (MMICs) have been designed and built to function together as a source of electromagnetic radiation at a frequency of 120 GHz. One of the...
Briefs: Photonics/Optics
A voltage-controlled oscillator (VCO) that operates in the frequency range from 77.5 to 83.5 GHz has been constructed in the form of a monolithic microwave integrated circuit (MMIC) that includes...
Briefs: Photonics/Optics
Distributing Digital Signals to Multiple Destinations
Digital signal fanout is a very common requirement in testing, experimentation, and systems integration. Unlike radio frequency signals, high-speed digital signals cannot be simply split or "teed" off to multiple destinations. Even with a matched-impedance splitter, the resulting amplitude loss...
Briefs: Robotics, Automation & Control
Surface-acoustic-wave (SAW) piezoelectric motors of a proposed type would be capable of operating in multiple degrees of freedom (DOFs) simultaneously and would be amenable to integration into...
Briefs: Robotics, Automation & Control
A feedback position-control system has been developed for maintaining the concentricity of a turbofan with respect to a nacelle during acoustic and flow tests in a wind tunnel. The...
Briefs: Robotics, Automation & Control
Lightweight, Self-Deployable Wheels
Ultra-lightweight, self-deployable wheels made of polymer foams have been demonstrated. These wheels are an addition to the roster of cold hibernated elastic memory (CHEM) structural applications. Intended originally for use on nanorovers (very small planetary-exploration robotic vehicles), CHEM wheels could also...
Briefs: Motion Control
Hopping Robot With Wheels
A small prototype mobile robot is capable of (1) hopping to move rapidly or avoid obstacles and then (2) moving relatively slowly and precisely on the ground by use of wheels in the manner of previously reported exploratory robots of the "rover" type. This robot is a descendant of a more primitive hopping robot described...
Briefs: Motion Control
Grease-Resistant O Rings for Joints in Solid Rocket Motors
There is a continuing effort to develop improved O rings for sealing joints in solid-fuel rocket motors. Following an approach based on the lessons learned in the explosion of the space shuttle Challenger, investigators have been seeking O-ring materials that exhibit adequate resilience for...
Briefs: Manufacturing & Prototyping
An improved method of designing and fabricating laminated composite-material (matrix/fiber) structures containing embedded shape-memory-alloy (SMA) actuators has been devised....
Briefs: Mechanical & Fluid Systems
A mechanical amplifier has been devised to multiply the stroke of a piezoelectric transducer (PZT) intended for use at liquid helium temperatures. Interferometry holds the key to high angular...
Briefs: Mechanical & Fluid Systems
A method of testing explosive and pyrotechnic devices involves exploding the devices inside swell sleeves. Swell sleeves have been used previously for measuring forces. In the present method, they are...
Briefs: Mechanical & Fluid Systems
NASA Dryden Flight Research Center's new Propulsion Flight Test Fixture (PFTF), designed in house, is an airborne engine-testing facility that enables engineers to gather flight data on small experimental engines....
Briefs: Information Technology
An improved approach to the mathematical modeling of feedback control of thermal networks has been devised. Heretofore software for feedback control of thermal networks has been developed by...
Briefs: Information Technology
A methodology is emerging from efforts to design a mission operations facility.
A methodology for designing operational facilities for collaboration by multiple experts has begun to take shape...
Briefs: Information Technology
Artifacts that are fabricated with the help of molecular-beam epitaxy (MBE) are undergoing development for use as dimensional calibration standards with sub-micron widths. Such standards...
Briefs: Physical Sciences
Software for Tracking Costs of Mars Projects
The Mars Cost Tracking Model is a computer program that administers a system set up for tracking the costs of future NASA projects that pertain to Mars. Previously, no such tracking system existed, and documentation was written in a variety of formats and scattered in various places. It was difficult to...
Briefs: Software
Software Computes Tape-Casting Parameters
Tcast2 is a FORTRAN computer program that accelerates the setup of a process in which a slurry containing metal particles and a polymeric binder is cast, to a thickness regulated by a doctor blade, onto fibers wound on a rotating drum to make a “green” precursor of a metal-matrix/fiber composite tape....
Briefs: Physical Sciences
Irreversible Entropy Production in Two-Phase Mixing Layers
This report presents a study of dissipation (irreversible production of entropy) in three-dimensional, temporal mixing layers laden with evaporating liquid drops. The purpose of the study is to examine the effects of evaporating drops on the development of turbulent features in flows....
Top Stories
Blog: Manufacturing & Prototyping
2025 Holiday Gift Guide for Engineers: Tech, Tools, and Gadgets
Blog: Power
Using Street Lamps as EV Chargers
INSIDER: Semiconductors & ICs
Scientists Create Superconducting Semiconductor Material
Blog: Materials
This Paint Can Cool Buildings Without Energy Input
Blog: Software
Quiz: Power
Webcasts
Upcoming Webinars: AR/AI
The Real Impact of AR and AI in the Industrial Equipment Industry
Upcoming Webinars: Motion Control
Next-Generation Linear and Rotary Stages: When Ultra Precision...
Podcasts: Manufacturing & Prototyping
SAE Automotive Engineering Podcast: Additive Manufacturing
Podcasts: Defense
A New Approach to Manufacturing Machine Connectivity for the Air Force
On-Demand Webinars: Manufacturing & Prototyping
Streamlining Manufacturing with Integrated Digital Planning and Simulation

