Mechanical/​Mechatronics

A report proposes devices containing electrorheological fluids (ERFs) damper for controlling deployments of lightweight, flexible structures in outer space. The structures would include spring members that could be wound or compressed for compact stowage during transport. The ERF based...

A proposed microelectromechanical system (MEMS) containing a closed- Brayton-cycle turbine would serve as a prototype of electric- power generators for special applications in which high energy densities are required and in which, heretofore, batteries have been used. The system would have a volume of about 6...

A report proposes the use of cold hibernated elastic memory (CHEM) foam structures to cushion impacts of small (1 to 50 kg) exploratory spacecraft on remote planets. Airbags, which are used on larger (800 to 1,000 kg) spacecraft have been found to (1) be too complex for smaller...

A report presents a method of optimizing the orientations of three reaction wheels used to regulate the angular momentum of a spacecraft. The method yields an orientation matrix that minimizes mass, torque, and power demand of the reaction wheels while maximizing the allowable duration...

A variable delay line is being developed as part of a far-infrared or submillimeter- wavelength interferometer that would operate in a vacuum in the cryogenic temperature range. No such delay line for spatial interferometry has previously been built for operation under these conditions.

Highly precise air bearings for suspending objects over an epoxy flat floor in a laboratory have been developed. These bearings float on airgaps 3 to 5 mil (about 0.08 to 0.13 mm) thick. They are modern versions of precise air bearings, developed during the 1960s, that offer a working coefficient of friction of only...

A report summarizes the development, applications, and procedures for use of ENSAERO, a computer program for simulating aeroelastic phenomena (e.g., wing flutter) of aircraft and spacecraft. ENSAERO computes aeroelastic responses by simultaneously numerically integrating Euler and/or Navier-Stokes equations of airflow and...

The Foveal Extra-Vehicular Activity Helper-Retriever (FEVAHR) is a mobile robot that features a hierarchical foveal machine-vision system (HFMV). The FEVAHR is a prototype of future robots that could detect, recognize, track, and pursue objects and avoid obstacles while operating autonomously, controlled by...

This report discusses a proposed docking mechanism to be located in a small hangar on the outside of the International Space Station (ISS). The mechanism would enable docking of a miniature robotic spacecraft (or free flyer) that would carry a video camera and would operate in the vicinity of the ISS....

A report describes an emergency tether-deployment (ETD) system designed to minimize the harm caused by two events that can occur during deployment of tethered payloads from a space shuttle in orbit. One such event is snagging of the tether during payout while the payload is near the shuttle,...

A compact actuator generates rotary or linear motion with a large torque or force, respectively. The original version of this actuator is designed to pull a wedge that, until pulled, prevents retraction of the proposed extended nose landing gear of the space shuttle. The original version is also...

Efforts are underway to develop microfabricated flow controllers and pressure regulators that contain as few discrete components as feasible and that are cheaper, more robust, and orders of magnitude smaller than are currently commercially available devices that have similar capabilities. The...

A report discusses the problem of controlling the maneuvers of multiple spacecraft flying in formation and, more specifically, making the entire formation rotate about a given axis and synchronizing the rotations of the individual spacecraft with the rotation of the formation. Such...