A report proposes that solar sails for spacecraft be made from nets of carbon fibers. The reason for choosing carbon nets over thin polymeric films is that nets offer greater capability for carrying tensile loads. The sails could be made from carbon-fiber nets of various thicknesses: nets used for...

A report proposes that solar sails for spacecraft be constructed in segments in such a way as to minimize stresses. The segments could be made of metallized fabric or film and could be connected by short, strong tethers. Alternatively, the segments could be like islands, held loosely in...

A report proposes the development of modular propulsion clusters (MPCs) — small, self-contained propulsion systems that would be standardized, mass-produced, and readily installed on a variety of miniature future spacecraft. The MPCs would be inexpensive, "turn-key" alternatives to expensive conventional...

A report describes the system for controlling the radial position and tilt of a spacecraftlike habitat for humans in NASA's Space Flight Environmental Simulator (SFES) — a 16-m-diameter centrifuge used previously to evaluate effects of hypergravitational acceleration on animals....

A report describes an emerging class of miniature, highly capable, relatively inexpensive satellites that could be launched rapidly by nontraditional methods. Of particular interest is a subclass of proposed launch-on-demand microsatellites for inspecting and servicing other satellites (targets)...

The concept of free-flying micro-spacecraft was to develop a miniature spacecraft system fully integrated with a scientific sensor. A fleet of such tiny spacecraft would be deployed in space for multi-probe measurements of a three-dimensional phenomenon and to separate the spatial/temporal...

A report proposes a miniature electrothermal spacecraft engine. The engine would include a chamber with an inside length of ≈1.5 cm and inside diameter of ≈0.25 cm, with a dielectric (ideally diamond) sidewall lining, a metal-coated expansion nozzle at one end, and a metal electrode at the other end. A...

A report presents a proposal to harness photosynthetic bacteria to generate essential materials needed during human and robotic exploration on the surface of Mars. Utilizing an extremely small amount of H2O and an ample amount of CO2 (and N2 and/or other elements and compounds) already...

This report discusses direct numerical simulations (DNS) of a mixing layer, between a nitrogen stream and a heptane stream initially flowing at different velocities, under supercritical conditions and undergoing a transition to turbulence. Thermodynamically, supercritical conditions...

The Integrated Optical Design Analyzer (IODA) is a computer program that facilitates multidisciplinary concurrent engineering of highly precise optical instruments. (IODA should not be confused with a multidisciplinary optical-system-analysis program, called "IMOS," that has been reported...

A computer program facilitates the selection of the dominant modes of vibration of a structure - especially the dominant modes that interact with specific locations on the structure. This program is intended for use in conjunction with any of the various vibration-mode-analysis programs...

An improved non-planar ring oscillator (NPRO) of the fiber-pigtailed type has been developed. The improvements over prior lasers of this type lie in details of design and construction that are intended to enhance mechanical stability and thereby increase the stability of optical...

The SEASCRAPE computer program estimates the composition, temperature, and pressure of the atmosphere as a function of position by fitting remote-sounding spectroscopic data to a mathematical model of the transfer of radiation through the atmosphere. SEASCRAPE consists of two integrated...

A report presents a study of the efficacy of shot shifting for reducing stitching errors in diffraction gratings made by electron-beam (E-beam) lithography. Stitching errors arise from fabricating a grating as a mosaic of smaller gratings by frequently translating the grating blank....

The Automated SAR Ortho-rectification Software System enables users of synthetic-aperture-radar (SAR) data to form processed images that are free of the distortion caused by the SAR imaging geometry and topography. The software consists of four modules:

A solar-powered vapor-compression refrigeration system developed for Johnson Space Center operates without batteries. The design of this system will make the cost of solar-powered refrigeration systems competitive and enable the use of such systems in long-distance spaceflights, military field...

A technique based on the generation of highly localized thermal stresses has been devised as a means of cutting both flat and curved glass sheets of thicknesses between 30 and 600 µm. The technique is reliable, accurate, and economical. The technique can be used, for example, to cut thin glass...

Ferrate (VI) salts have been proposed for use in sterilizing water (perhaps also in sterilizing air). The iron in ferrate (VI) salts is in its highest oxidation state (VI), and these salts are extremely strong oxidants. In laboratory experiments, it was shown that treatment of DNA solutions with...