New Vision-Based System Teaches Machines to Understand Their Bodies

In an office at MIT’s Computer Science and Artificial Intelligence Laboratory (CSAIL), a soft robotic hand carefully curls its fingers to grasp a small object. The...

Creating Wearables for Preventative Healthcare

Wearables detect early signs of health issues, paving the way for transforming preventative healthcare.

How Much Do You Know About the History of Military Helicopters?

Test your knowledge about the history of military helicopters.

5Ws of the Mini Spectrometer

North Carolina State University engineers have built a tiny spectrometer that is orders of magnitude smaller than current technologies and can accurately measure wavelengths of light from ultraviolet to the near infrared.

My Opinion: How to Move to Agriculture 4.0

All the pieces are in place for agriculture to become smarter — it’s time to move ahead. Here’s how to move to Agriculture 4.0.

Privacy and Data Security in the Era of Medical Wearables

As we continue to explore the impact of wearables on healthcare, this episode focuses on privacy and data security in the era of medical wearables. Wearables are collecting vast...

Dust-Powered 3D Printing

AI SpaceFactory sells 3D printers informed by its work on Marshall Space Flight Center’s Centennial Challenge, which the company won with print material containing crushed basalt similar to ground cover on Mars.

Product of the Month

See the product of the month: STMicroelectronics' LEOPOL1 point-of-load step-down converter for low-Earth orbit deployments targeting the needs of equipment developers in the space market.

Products of Tomorrow

See the products of tomorrow, including a new tunable laser that uses a series of rings to smoothly emit many light wavelengths from a single chip; a smart capsule called PillTrek, which can measure pH, temperature, and a variety of different biomarkers; and more.

New on the Market

See what's new on the market, including Creform Corporation's cart, ACROS®, designed to be used on challenging terrains such as snow, soil, sand, mud, grass, rough concrete, and even steps; Instron's AT3 Floor Model testing system, for automated metals testing; Motorized high-resolution actuators from PI Americas; Walter's new countersink option; and more.

New Physics-Based Simulation Tool Accelerates Battery Development

For years, researchers have been developing tools to accelerate the materials discovery and development of new energy storage technologies, including those that can predict the performance of the batteries systems for long-term grid services. With a new physics-based simulation tool, EZBattery Model, it now takes less than a second to predict the performance of redox flow batteries and its variants. Read on to learn more.

How ISS Will Be Evaluating Photovoltaic Materials

Solar cells account for approximately six percent of the electricity used on Earth; however, in space, they play a significantly larger role, with nearly all satellites relying on advanced solar cells for their power. That’s why Georgia Tech researchers will soon be sending 18 photovoltaic cells to the International Space Station (ISS) for a study of how space conditions affect the devices’ operation over time. Read on to learn more.

A New Computer Vision Method Enables Faster Screening of Electronic Materials

A new computer vision technique developed by MIT engineers significantly speeds up the characterization of newly synthesized electronic materials. The technique automatically analyzes images of printed semiconducting samples and quickly estimates two key electronic properties for each sample. Read on to learn more.

New Technique Could Accelerate Noise-Free Superconducting Qubits for Quantum Computing

A research team led by scientists at Lawrence Berkeley National Laboratory (Berkeley Lab) has developed a new fabrication technique that could improve noise robustness in superconducting qubits, a key technology for enabling large-scale quantum computers. Read on to learn more.

Thin Film Sensor for Ultra High-Temp Measurement

Innovators at NASA Johnson Space Center have developed a thin film sensor that measures temperatures up to 1200 °F, and whose prototype successor may achieve measurements up to ~3000 °F — which was the surface temperature of the Space Shuttle during its atmospheric reentry. Read on to learn more.

‘Exergames’ Aim to Make Working Out Enjoyable

Virtual reality video games that combine screen time with exercise are a great way to get fit, but game designers face a major challenge — adherence to ‘exergames’ is low, with most users dropping out once they start to feel uncomfortable or bored. Read on to learn what a team did to thwart this.

Advanced Thermal Inspection with Pulsed Light Emitting Diodes (PLED) Technology

Engineers at NASA Langley Research Center have developed a cutting-edge thermal inspection technology that enhances defect detection on low-emissivity surfaces by eliminating false readings caused by infrared reflections. Read on to learn more.

Twisted Moiré Photonic Crystals

Researchers have developed an on-chip twisted moiré photonic crystal sensor that uses MEMS technology to control the gap and angle between the crystal layers in real time. The sensor can detect and collect detailed polarization and wavelength information simultaneously. Read on to learn more.

3D Printing Self-Heating Microfluidic Devices

MIT researchers have used 3D printing to produce self-heating microfluidic devices, demonstrating a technique which could someday be used to rapidly create cheap, yet accurate, tools to detect a host of diseases. Read on to learn more.

Diversifying the Supply Chain for Producing Large-Scale Metal Parts

Researchers at the Department of Energy’s Oak Ridge National Laboratory are using advanced manufacturing techniques to revitalize the domestic production of very large metal parts that weigh at least 10,000 pounds each and are necessary for a variety of industries, including clean energy. Read on to learn more.

A One-Piece Liquid Rocket Thrust Chamber Assembly

NASA researchers are eliminating complex joints by manufacturing a 1-piece TCA utilizing 3D printing and large-scale additive manufacturing technologies to directly deposit the nozzle onto the combustion chamber. And, by replacing a traditional solid metal jacket with a composite overwrap for support, the overall weight is reduced by over 40 percent. Read on to learn more.

Flexible Silicon Photovoltaics: A Breakthrough in Space-Grade Solar Power

In-space manufacturing is expected to become a core part of future space economy by using assets in orbits or beyond Earth orbit for use in space. Tech Briefs interviewed space-focused solar energy startup Solestial’s CTO Stanislau Herasimenka about the key technology developments leading to this increased momentum for space-based manufacturing and the role solar power will play in it. Read on for the full interview with Herasimenka, edited for length and clarity.

How to Optimize for Isolation and Performance Using Advanced Digital Isolators

This article briefly examines why isolation is required, emphasizing the need in sensor-based circuits. It then looks at various aspects of isolation using state-of-the-art digital isolators from Analog Devices and shows how they can be applied.

Positioning Wafers with Micrometer Precision for PECVD Coating

For loading and unloading workpiece carriers containing wafers of different sizes in an automated process prior to PECVD coating, acp systems has developed a robotic solution aided by image processing for a leading manufacturer of space solar technology. Read on to learn more.