Photonics/​Optics

All current cameras and imaging systems have the same classical problem in practical applications. To complete the observation task, a large amount of data is captured, processed, and transmitted; then most of the data is discarded because it is not essential for the given observation task. The problem comes from...

Legacy NASA spacecraft windows suffer from specialized costs and operational constraints associated with embedding optically transparent apertures within structures that are designed to maximize strength, safety, and environmental integrity. A new approach to the legacy window solution...

In response to the requirements of the Space-Based Relay Study (SBRS) undertaken by NASA in 2013, as well as the Integrated Radio and Optical Communications (iROC) project being conducted by NASA Glenn Research Center (GRC) beginning in 2012, a calculation procedure was required to rapidly assess the...

Precise distance, time, and pulse width measurements are required for many areas of science and engineering. Time-of-flight methods are often used to measure remote distances. Optical signals are attractive because the small wavelength allows small transmit and receive telescopes. Short pulsed lasers are attractive...

The Exploration Visualization Environment (EVE) is a simulation, visualization, and analysis system designed to integrate engineering data with a virtual environment in support of the design and planning of space-based missions. Through the integration of time-dependent data with detailed graphical models...

Diagnostic medical ultrasound requires psychomotor skill in image acquisition and cognitive skill in image interpretation. There is a lack of an objective, quantitative, and standardized method to assess psychomotor skill. In traditional radiology and cardiology training programs, physicians are certified based on...

Solar arrays (radiated or non-radiated) and other technologies are candidate materials for projects in JPL. Some of the projects need to qualify these potential technologies to cryogenic extreme temperatures (from 133 to 50 K or lower). Those technologies...

It is of great interest to the scientific community to have the ability to analyze drilled boreholes in situ on the surfaces of the Moon and Mars. The goal of this work was to design and fabricate a Downhole Regolith Interrogation with...

Imaging spectrometers yield rich and informative data products, but interpreting them demands time and expertise. There is a continual need for new algorithms and methods for rapid firstdraft analyses to assist analysts during instrument operations. Intelligent data...

This innovation is a hermetically sealed case or very small chamber. A photomultiplier tube (PMT) is mounted inside the chamber. The circuit board is also installed inside the chamber with appropriate feedthroughs for signals. An adapter/floating mount called the phototube to light pipe system mount (PLPSM) allows the...

This work originated with the Wide Field InfraRed Survey Telescope (WFIRST) slitless spectrometer design (GRISM assembly), which attempted to follow the Hubble Space Telescope (HST) method of employing a singleelement GRISM as a slitless spectroscope. However, WFIRST’s field of view...

Back pain and injury are recognized risks that can affect the well-being and performance of crewmembers during missions, as well as their long-term health. Spine elongation is a documented effect of microgravity, back pain is a common occurrence in early flight, and the post-flight incidence of spinal...

Two-step laser desorption/photoionization mass spectrometry (L2MS) represents a powerful tool for the organic analysis of astromaterials. The technique has high sensitivity and requires little to no sample preparation.

Theodolite autocollimation metrology continues to play an important part in spacecraft optical alignment. Spacecraft optical alignment is both art and science for using optical instruments to place or determine the orientation and envelope of critical components on...

Avalanche photodiodes (APDs) are widely used to sense and amplify optical signals into electric signals based on their high quantum efficiency of photon detection and desirable internal gain. The high internal gain associated with APDs, however, may also lead to increased levels of excess noise that...

The Cryogenic Fiber Optic Sensing System (CryoFOSS) offers an approach to liquid-level sensing that uses fiber optic Bragg sensor technology. The innovation is able to sense liquid levels to within 1/4-inch spatial resolution and can actively discern between...

An ion mass spectrometer was developed (IMS) that can operate in the high radiation environment of Jupiter’s magnetosphere and its icy moons. If successful, this instrument will provide the first plasma composition measurements within Jupiter’s magnetosphere. This entails development of GEANT...

The goal of the High Energy Replicated Optics to Explore the Sun (HEROES) mission was to adapt an existing balloon payload, known as High Energy Replicated Optics (HERO), for solar observation. HERO used an on-axis star camera for fine aspect sensing, but this camera...

Laser absorption spectroscopy has emerged as one of the most important applications for semiconductor quantum cascade (QC) lasers, particularly in the mid-infrared spectral regime where many gases of interest exhibit fundamental absorption features. Laser absorption...

A microelectromechanical system (MEMS) glow discharge plasma electron and ion source (GDEIS) was designed for operation in high-pressure environments such as planetary atmospheres for mass spectroscopy. Glow discharge electron/ ion sources create electrons and ions from gas molecules in an excited...

The development of a conformal nanotube process is enabling for many applications in solar physics and space astrophysics (e.g., direct detection and imaging of exoplanets). Coronagraphs are key heliophysics instruments because they image coronal mass ejections (CMEs), which are the most energetic...

Ion optics, or grids, for ion thrusters or ion sources are traditionally made by subtractive manufacturing methods such as milling/drilling or chemically etching holes from thin sheets of bulk material. This innovation uses additive manufacturing (AM), or 3D printing, to build the grids from...

The purpose of this work was to develop and demonstrate technologies for a next-generation, efficient, swath-mapping space laser altimeter. The Lidar Surface Topography (LIST) mission concept allows simultaneous measurements of 5-meter-spatial-resolution topography and vegetation...

In recent years, a large number of Lagrangian-based optical velocimetry techniques have been developed that are known, collectively, as either flow tagging velocimetry or molecular tagging velocimetry. In either case, the method is based on the use of an optical resonance to “tag” a pattern into a...