Batteries

Building an Affordable Grid-Scale Alternative to Batteries

Researchers at Rice University have found a new way to improve a key element of thermophotovoltaic systems, which convert heat into electricity via light. Read on to learn more about it.

How to Detect Battery Failures Quicker

Batteries in electric vehicles can fail quickly, sometimes catching fire without much warning. Sandia National Laboratories is working to detect these failures early and provide sufficient warning time to vehicle occupants. Read on to learn more about it.

Nail Penetration Adapter for Li-Ion Battery Testing

Innovators at NASA Johnson Space Center have designed a pneumatic nail penetration trigger system that drives a Li-ion battery cell into thermal runaway using a tungsten nail. Read on to learn more.

A Better-Performing Sodium-Ion Cathode

A cathode material put forward by the Dincă Group, a layered organic solid called bis-tetraaminobenzoquinone (TAQ), outperforms traditional lithium-ion cathodes in both energy and power densities in a technology that is truly scalable.

Using MRIs to Detect Metal-Ion Dissolution in Lithium Battery Cathodes

Researchers have been working on a method to detect and investigate the dissolution of the metal ion in a cathode. Using nuclear MRI, they were able to directly observe the dissolution in real time. Read on to learn more.

New Microactuator Driving System Could Give Microdrones a Jump-Start

An innovative circuit design could enable miniature devices, such as microdrones and other microrobotics, to be powered for longer periods of time while staying...

Critical Minerals Recovery from Electronic Waste

A PNNL research team used a simple mixed-salt water-based solution and their knowledge of metal properties to separate valuable minerals in continuously flowing reaction chambers. Read on to learn more.

A Yarn-Like Seawater Battery

Researchers have developed a yarn-like battery prototype that works when immersed in seawater.

A Safer, More Efficient Lithium Metal Battery

A research team from DGIST has developed a lithium metal battery using a “triple-layer solid polymer electrolyte” that offers greatly enhanced fire safety and an extended lifespan.

Critical Minerals Recovery from Electronic Waste

A PNNL research team used a simple mixed-salt water-based solution and their knowledge of metal properties to separate valuable minerals in continuously flowing reaction chambers. Read on to learn more.

3 Energy Technologies that Will Power Your Interest

Watch this video to learn more about three new energy technologies. One is from Rice University; one is from Université Grenoble Alpes, Grenoble, France and University of San Diego, CA; and the last one is from Swiss Federal Laboratories for Materials Science and Technology (Empa).

Where Do EV Batteries Go When They Die?

Some go to Cox Automotive’s battery solutions center in Oklahoma City, where the company works with OEMs on their post-sale needs. Others get recycled, with lots of OEMs teaming up with Redwood Materials. Read on to find out what happens to the others.

Crafting Safe, Long-Cyclable Lithium Metal Batteries for High Temperatures

A research team led by Professor Dong-Myeong Shin of the Department of Mechanical Engineering at the University of Hong Kong has developed a new generation of lithium metal batteries, representing a significant advancement in the field. Here, an interview with Shin to learn more about the technology.

DC-DC Converters for High Reliability eVTOL Auxiliary Power Systems

eVTOL power system architectures are not yet well defined, and with the wide variety of possible configurations, from small, unmanned drones through multiseat passenger craft, there may never be one standard. Read on to learn what this means.

Solving the Battery Recycling Challenge

The surging global popularity of electric vehicles is creating a new challenge: a mounting pile of spent lithium-ion batteries. In just a decade, more than 1.2 million tons of lithium-ion batteries will reach their end-of-life, creating an urgent need for efficient and profitable recycling solutions. This impending battery waste crisis presents both a challenge and an opportunity. Read on to learn more.

Researchers Discover a Surprising Way to Jump-Start Battery Performance

In a study published in Joule, researchers at the SLAC-Stanford Battery Center report that giving batteries a first charge at unusually high currents increased their average lifespan by 50 percent while decreasing the initial charging time from 10 hours to just 20 minutes. Read on to learn more.

Researchers Unveil Scalable Graphene Technology to Revolutionize Battery Safety and Performance

Researchers have developed a pioneering technique for producing large-scale graphene current collectors. This breakthrough promises to significantly enhance the safety and performance of lithium-ion batteries (LIBs), addressing a critical challenge in energy storage technology. Read on to learn more.

New Battery Cathode Material Could Revolutionize EV Market and Energy Storage

A multi-institutional research team led by Hailong Chen has developed a new, low-cost cathode that could radically improve lithium-ion batteries (LIBs) — potentially transforming the electric vehicle (EV) market and large-scale energy storage systems. Read on to learn more.

Dormant Capacity Reserve in Lithium-Ion Batteries Detected

Using transmission electron microscopes, Researchers at Graz University of Technology were able to systematically track lithium ions as they traveled through battery material, map their arrangement in the crystal lattice of an iron phosphate cathode with unprecedented resolution, and precisely quantify their distribution in the crystal. Read on to learn more.

Second Life of Lithium-Ion Batteries Could Take Us to Space

The global use of lithium-ion batteries has doubled in just the past four years, generating alarming amounts of battery waste containing many hazardous substances. The need for effective recycling methods for spent lithium-ion batteries is becoming increasingly critical. Scientists from various Polish research institutions presented a promising solution to this issue. Read on to learn more about it.

Folded or Cut, This Lithium-Sulfur Battery Keeps Going

To address stability and safety issues, researchers have designed a lithium-sulfur battery that features an improved iron sulfide cathode. One prototype remains highly stable over 300 charge-discharge cycles, and another provides power even after being folded or cut. Read on to learn more.

Product Showcase

See what's in the product showcase, including Miba Resistors' RST5N resistor series; Luxinar's femtosecond lasers; Freudenberg Sealing Technologies' cell caps; CPEG's durable equipment to safely handle and process lithium and other minerals for lithium-ion batteries; and much more.